Looking for small inch screwdrivers

[D_o_S]

Hi,

I'm looking for some screwdrivers, sizes 1/16", 3/32", 0.050"... my first choice was Wiha, but I noticed that they've only got the PicoFinish ones in those sizes...

Can anyone recommend me some screwdrivers in those sizes?

Thx.

[Danglerb]

Small screwdrivers, good ones at least, seem to show up in specific repair genres like gun smithing tools, camera repair, watch repair, etc.

Wheeler Engineering.
http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=439523

NIWA
https://www.micro-tools.com/store/SearchByCategory.aspx?CategoryCode=NIWA

Bergeon
http://www.watchtool.co.uk/screwdrivers-individual-c-2_261.html?osCsid=e8f08f9e46dbeaa33153808f9a3d7469

[shopforeman]

Whenever I am looking for small tools I go HERE. (http://www.micromark.com/)

[wilbilt]

I have been pretty satisfied with the "Kronus" micro stuff from Radio Shack.

Go figure.

[mhoffm911]

I was thinking the same thing as Will. I have a set from Radio Shack as well. Any time I have ever needed a very small screwdriver, my set from Radio Shack has provided the answer. They have some great sales on them during the holidays.

[TENMMIKE]

STARRETT jewelers screw drivers NO.s555-6 set of 6 is as good as youll ever put your paws on, the set is .025-.100
http://catalog.starrett.com/catalog/catalog/groupf.asp?groupid=240

[jimmycrackcorn]

i have a cheap set from radio shack and they never let me down

[chevy302dz]

These guys make some of the best micro tools out there.

http://www.moodytools.com/

[Danglerb]

The trick with little screws seems to be to exactly as possible fit the slot in both dimensions, so you can end up with a LOT of screwdrivers if your serious.

[wilbilt]

The trick with little screws seems to be to exactly as possible fit the slot in both dimensions, so you can end up with a LOT of screwdrivers if your serious.

How true.

How many minuscule sizes of hex and Torx drivers can there be? Working on modern laptop computers is akin to neurosurgery.

[Danglerb]

Hex and Torx have a finite number, smallest Torx is what about a T3, and hex has maybe 3 or so sizes below 1 mm?

Small blade screwdrivers not only have different widths, but different thicknesses. In watch repair they sell sets to match various brands of watch, apparently the oddball sizes are at least standardized within brands.

[george4]

Hex and Torx have a finite number, smallest Torx is what about a T3, and hex has maybe 3 or so sizes below 1 mm?

Small blade screwdrivers not only have different widths, but different thicknesses. In watch repair they sell sets to match various brands of watch, apparently the oddball sizes are at least standardized within brands.
I have a wiha set down to T3 but have not had use for it yet. I think I read somewhere recently that someone is offering a T1.

[franzdom]

STARRETT jewelers screw drivers NO.s555-6 set of 6 is as good as youll ever put your paws on, the set is .025-.100
http://catalog.starrett.com/catalog/catalog/groupf.asp?groupid=240

Exactly! Now if I only had their phillips equivalent...

Holy cow, I never knew they had replaceable tips, wow :)