justinmc
06-22-2008, 11:35 PM
Back to cleaning out the basement and "for sale" boxes.........
Buffalo (Taiwan made stamped on all this stuff)
3/8" drive socket driver set.. No 1 & No 2 phillips, 3/16 & 1/4" flat blade, 1/8-3/8" hex or allen socket drivers.. 12pc total in green storage tin with tray. Listed as set # 3812 $8
http://www.garage-jdm.com/garagesale/buffalohex1.jpg
3/4" drive sockets.. big sockets. CHEAP sockets. New Britain 1 1/2", China 1 3/8, 1 1/8, 15/16, APEX 1 3/8" impact.
Not expensive.. but useable. $20
Williams 1/2" drive 1 1/4" 6pt socket.. older socket marked # 4-640 $5
http://www.garage-jdm.com/garagesale/williamssocket.jpg
Williams SAE box end wrench "set".. 3 wrenches.. SUPERRENCH style. 1" x 15/16" (7033C), 7/8" x 3/4" (7731A), 25/32" x 11/16" (7029) $25
http://www.garage-jdm.com/garagesale/williamssaebox.jpg
SK 3/8" 6pt metric shallows... sizes 7-19mm. No 8 or 15mm. The 13 & 14mm were lost and I subbed in a Wright (13mm) & K-D (marked USA 14mm). $20
http://www.garage-jdm.com/garagesale/skmetricshallow.jpg
SK 1/4" deep sae's.. 6pt.. sizes 1/4, 9/32, 5/16, 11/32, 3/8, 7/16.. $10
SK 1/4" shallow sae's 6pt sizes 3/16, 9/32, 1/4 (12pt), 11/32, 7/16, 1/2(brand new) $8
http://www.garage-jdm.com/garagesale/sk14sae.jpg
MAC 1/4" deep sae's 6pt sizes 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 $23
Mac 1/4" shallow sae 6pt sizes 1/4, 9/32, 11/32, 3/8, 7/16, 1/2 $15
http://www.garage-jdm.com/garagesale/mac14sae.jpg
Snap On ratchet wrenches.. flip style (old style)
R1618S 1/2 x 9/16... some corrosion getting this one warrantied.. wouldn't ratchet earlier.
RBM1415SA (current # RBM1415C) $10
http://www.garage-jdm.com/garagesale/snaponratchetwrench.jpg
Snap On 6pt 3/8" deep chrome metric set.. 6-19mm some corrosion on insides of a couple (I sprayed with WD40 after photos but didn't want people to think I was hiding anything) This is not readily available off the truck. Most sets are 10pc or 12pc.. this one is 14pc. Most 12pc sets are trading on ebay for $90-125.. I'll sell this set for $100 plus shipping on this board only.
http://www.garage-jdm.com/garagesale/snapon38deepmetric1.jpg
http://www.garage-jdm.com/garagesale/snapon38deepmetric2.jpg
Snap On 6pt 3/8" drive swivel impacts.. good shape.. sizes 10-18mm (set # 207IPFMY) good shape.. nice sockets. I have a set of 8-19mm so I don't need these too. $120
http://www.garage-jdm.com/garagesale/snapon38swivelimpact.jpg
Prices are all OBO.. just cleaning out the basement & for sale boxes.
Buffalo (Taiwan made stamped on all this stuff)
3/8" drive socket driver set.. No 1 & No 2 phillips, 3/16 & 1/4" flat blade, 1/8-3/8" hex or allen socket drivers.. 12pc total in green storage tin with tray. Listed as set # 3812 $8
http://www.garage-jdm.com/garagesale/buffalohex1.jpg
3/4" drive sockets.. big sockets. CHEAP sockets. New Britain 1 1/2", China 1 3/8, 1 1/8, 15/16, APEX 1 3/8" impact.
Not expensive.. but useable. $20
Williams 1/2" drive 1 1/4" 6pt socket.. older socket marked # 4-640 $5
http://www.garage-jdm.com/garagesale/williamssocket.jpg
Williams SAE box end wrench "set".. 3 wrenches.. SUPERRENCH style. 1" x 15/16" (7033C), 7/8" x 3/4" (7731A), 25/32" x 11/16" (7029) $25
http://www.garage-jdm.com/garagesale/williamssaebox.jpg
SK 3/8" 6pt metric shallows... sizes 7-19mm. No 8 or 15mm. The 13 & 14mm were lost and I subbed in a Wright (13mm) & K-D (marked USA 14mm). $20
http://www.garage-jdm.com/garagesale/skmetricshallow.jpg
SK 1/4" deep sae's.. 6pt.. sizes 1/4, 9/32, 5/16, 11/32, 3/8, 7/16.. $10
SK 1/4" shallow sae's 6pt sizes 3/16, 9/32, 1/4 (12pt), 11/32, 7/16, 1/2(brand new) $8
http://www.garage-jdm.com/garagesale/sk14sae.jpg
MAC 1/4" deep sae's 6pt sizes 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 $23
Mac 1/4" shallow sae 6pt sizes 1/4, 9/32, 11/32, 3/8, 7/16, 1/2 $15
http://www.garage-jdm.com/garagesale/mac14sae.jpg
Snap On ratchet wrenches.. flip style (old style)
R1618S 1/2 x 9/16... some corrosion getting this one warrantied.. wouldn't ratchet earlier.
RBM1415SA (current # RBM1415C) $10
http://www.garage-jdm.com/garagesale/snaponratchetwrench.jpg
Snap On 6pt 3/8" deep chrome metric set.. 6-19mm some corrosion on insides of a couple (I sprayed with WD40 after photos but didn't want people to think I was hiding anything) This is not readily available off the truck. Most sets are 10pc or 12pc.. this one is 14pc. Most 12pc sets are trading on ebay for $90-125.. I'll sell this set for $100 plus shipping on this board only.
http://www.garage-jdm.com/garagesale/snapon38deepmetric1.jpg
http://www.garage-jdm.com/garagesale/snapon38deepmetric2.jpg
Snap On 6pt 3/8" drive swivel impacts.. good shape.. sizes 10-18mm (set # 207IPFMY) good shape.. nice sockets. I have a set of 8-19mm so I don't need these too. $120
http://www.garage-jdm.com/garagesale/snapon38swivelimpact.jpg
Prices are all OBO.. just cleaning out the basement & for sale boxes.