The "Twins" have arived!!!!

[ToolmanTom]

here you go! I just received two new additions to the shop today. And if you read my post earlyer this year, you know what a deal I got them for. I am still awaiting the SS Tops for them too.:beer:

[Moose-LandTran]

Sweet!

All you need now is 4 more and a Peterbilt!

[wrenchr]

You said peterbuilt!!! lol

[eschoendorff]

Holy sickness batman! Nice... :pimpflash

[wrenchr]

Twin's Bassil!!!!!!!!!!!!!!

[v8garage]

I like your twins but these would be more fun!:beer:

[goodfellow]

I like your twins but these would be more fun!:beer:

Yeah, but in the long run they would be much more expensive ---:lol_hitti

[bluesman2a]

Yeah, but in the long run they would be much more expensive ---:lol_hitti

I hear resale on them is a BITCH!!! :beer::lol_hitti

[cb450r]

Them sure are purty! Of course I am talking about the boxes :P

[boiler7904]

I like your twins but these would be more fun!:beer:

Yeah, but in the long run they would be much more expensive ---:lol_hitti

I hear resale on them is a BITCH!!! :beer::lol_hitti

And the regularly scheduled maintenance is a bitch.

[Merkava_4]

Dang... v8garage, where'd you find her at? :drool:

[Kevin54]

All I can say is Daammmnn!!!! :bowdown: Hard to decide which "twins" I like better though. :headscrat

Both are going to be high maintenance, but I bet one set could be more FUN than the other set :drool:

[ToolGlutton]

Man, you do not know Peterbilt? :willy_nil It's the Snap on for semi trucks.

You said peterbuilt!!! lol

[wrenchr]

Man, you do not know Peterbilt? :willy_nil It's the Snap on for semi trucks.

It was a joke.

[v8garage]

You spend much time with the twins you might need to get a new peterbilt!:lol_hitti

[wrenchr]

You spend much time with the twins you might need to get a new peterbilt!:lol_hitti

Toolglutton ^ That was a joke to;):lol_hitti

[rsanter]

the twins on her are great for now...the other twins will keep their shape better in the long run.

oh hell, I am a live for the moment guy...

bob

[SocketDeviler]

It was a joke.

This board might need a Beavis and Butt-Head icon for the comically impaired.

Great boxes but I can't stop looking at the other "twins."

[wrenchr]

This board might need a Beavis and Butt-Head icon for the comically impaired.

Great boxes but I can't stop looking at the other "twins."

I do not even think that would of helped him.:headscrat

[Moose-LandTran]

I like your twins but these would be more fun!:beer:

That chick looks a lot like someone i used to know, i very much doubt it's her, but sure looks like her. :headscrat

[wrenchr]

That chick looks a lot like someone i used to know, i very much doubt it's her, but sure looks like her. :headscrat

Look up Moose and then let us know if it is her!!!

[chammyman]

That chick looks a lot like someone i used to know, i very much doubt it's her, but sure looks like her. :headscrat

looks like a girl called pamela I used to know

Also the Peterbilt truck, we don't get them in the uk

[paramudduck]

Moose said peterbuilt not peterbilt.
Built is the "Past tense and past participle of build." So basically he is saying "need a new peter made".

Peterbilt is the name of an truck company. Or I should say a Brand of PACCAR. You might be more familier with the DAF marque.

[chammyman]

they are DAF? So they are utter garbage then?

I hate daf's they are even worse than iveco. The only decent bits daf make are for fodens which use a mix and match of bits.

[Kevin54]

Peterbilt is the name of an truck company.

I've heard some girls referred to as Peterbuilt.:bounce:

[ToolmanTom]

they are DAF? So they are utter garbage then?



HA HA, he said "Utter"
:lol_hitti

[Diesel-Mech]

they are DAF? So they are utter garbage then?

I hate daf's they are even worse than iveco. The only decent bits daf make are for fodens which use a mix and match of bits.

They have nothing to do with DAF mechanically except for the model 320 which uses a DAF cab. I may be slightly biased though....

[Moose-LandTran]

Moose said peterbuilt not peterbilt.

No i didn't. Refer to post #2.

Sweet!

All you need now is 4 more and a Peterbilt!

What the hell are you lot drinking?

[chammyman]

They have nothing to do with DAF mechanically except for the model 320 which uses a DAF cab. I may be slightly biased though....

just as well then as the mechnicals are rather poor. We got Daf's in then a prpoer unit would come in say a Scania and the difference is iummense, the daf is like a plank across a ditch compared to the scanias suspension bridge.

[Moose-LandTran]

I LOVE Scanias.. :drool:

[TheToolMan]

This thread has been officially hi-jacked by a set of boobies, WOW

[PAToyota]

I was just thinking that this thread has had more twists and turns than your average end-of-season primetime cliffhanger! Toolchests to other chests to class eight trucks with a bit of suggested male enhancement thrown in for good measure...

And went downhill nearly as fast as the infamous stacked (http://www.garagejournal.com/forum/showthread.php?t=19100) thread!

[chammyman]

I LOVE Scanias.. :drool:

the scanias mean business. They are built for the miles.

[eschoendorff]

This board might need a Beavis and Butt-Head icon for the comically impaired.

Great boxes but I can't stop looking at the other "twins."

That's an excellent idea... heh heh heh....

[Deafautotech]

here you go! I just received two new additions to the shop today. And if you read my post earlyer this year, you know what a deal I got them for. I am still awaiting the SS Tops for them too.:beer:

Holy COW! i am wonder if you already got it full yet?? why you prefer to get two bottom boxes instead top and bottom box like i own KRL1203 and KRL1003??? my snap on guy said i would need get bigger box... i told him i already upgraded!!!! so no thanks...

[ToolmanTom]

Holy COW! i am wonder if you already got it full yet?? why you prefer to get two bottom boxes instead top and bottom box like i own KRL1203 and KRL1003??? my snap on guy said i would need get bigger box... i told him i already upgraded!!!! so no thanks...

Almost full, but I do have room to buy more tools, about 4 small drawers, and one medium drawer, is all that is left.
I decided on the two bottoms because I got a better deal. and with my new shop going in, floor space is not an issue.
Speaking of...I spent about three hours in my new shop drinking beer and just looking at the twins.

[Deafautotech]

Almost full, but I do have room to buy more tools, about 4 small drawers, and one medium drawer, is all that is left.
I decided on the two bottoms because I got a better deal. and with my new shop going in, floor space is not an issue.
Speaking of...I spent about three hours in my new shop drinking beer and just looking at the twins.

Damn Lucky! Are you plan to take picture of each drawers?? i am curious what is your shop do? automotive repairs or your garage?? :thumbup:

I like to have two bottom boxes but when i use it everyday, i just need chest on top of bottom box so i dont have to bend down...

Other question is i am wonder why you dont want KRL1023 as you get KRL70XX as it is lost of drawers?? iit make me curious why you want height little below than krl1023?

[Merkava_4]

Have you got the rubber mats on yet Tom? You're going to leave the rubber mats in place under the tops aren't you?

[Moose-LandTran]

I spent about three hours in my new shop drinking beer and just looking at the twins.

That's what i'm talkin' about. :pimpflash

I LOVE the colour of your boxes, very cool. I like that they're a bit unusual and outrageous. If i had the money i would've bought a big yellow 53" KRA that on was eBay about a week ago.

Every time i walk past my box at work i smile and think "that's right, i own that box and everything in it." good feeling. :drool:

[Fedwrench]

That is a whole lot of yellow!!:bowdown:

[e-tek]

Talk about thread hi-jacks!! Rarely has a better-built set of twins looked so good to so many - of course da' drawers are a thing of speculation, but the box is a thing of beauty.

[ToolmanTom]

Damn Lucky! Are you plan to take picture of each drawers?? i am curious what is your shop do? automotive repairs or your garage?? :thumbup:

I like to have two bottom boxes but when i use it everyday, i just need chest on top of bottom box so i dont have to bend down...

Other question is i am wonder why you dont want KRL1023 as you get KRL70XX as it is lost of drawers?? iit make me curious why you want height little below than krl1023?

Have you got the rubber mats on yet Tom? You're going to leave the rubber mats in place under the tops aren't you?

Its my garage, but do side work too.
As I mentioned before it was a really great deal for the 7023 boxes and the working height is better with the SS Tops.
I do have the matts on, and they will be left on under the ss Tops, it deadens the sound while working on top.

...My Snap-On dealer said he is having another promo sale on tool boxes, but I'm too busy with my shop to get another box, any one else need a deal like this? :beer:

P.S. If you want pictures of the tools, Ill do it but that is a lot of drawers.

[nissan_crawler]

I wish I had the money to do that.

[ratchet_gear]

P.S. If you want pictures of the tools, Ill do it but that is a lot of drawers.

Yes, I think we do.:bounce:

[Merkava_4]

I wish I had the money to do that.

This is your other life on the internet, you can have as much money as you want; you're the Maintenance Director at that Cessna shop aren't you? :D

[eschoendorff]

This is your other life on the internet, you can have as much money as you want; you're the Maintenance Director at that Cessna shop aren't you? :D

He is if you're a porn star... :spit:

[ToolmanTom]

Here you go boys, don't drool on the fresh paint.

[ToolmanTom]

I said no drooling!!!

[ToolmanTom]

Hows that for a tool? Taurus .38 special.

[ToolmanTom]

Ya there is room for more tools.

[ToolmanTom]

I use the red box for my body work tools.

[ToolmanTom]

There they are in the new shop. and the toy is there too...ya have to get out and have fun every once in a while.
Hey look, it matches.

[ratchet_gear]

Thank you sir!!!!!:beer:

[SteveU]

Hows that for a tool? Taurus .38 special.


A toolbox with a built in security system:thumbup:

[Deafautotech]

wow, thank you for post the pictures of tools and boxes... i am wonder why you want all tools space out where the each tool have their drawers? like sockets in one drawer, wrenches in other drawer and else... i just try cramming all my tools in where they fit my needs better on my KRL1203 and KRL1003.

[e-tek]

Way to get the thread back on track - with a GREAT set of drawers, filled with candy for men!

[nissan_crawler]

wow, thank you for post the pictures of tools and boxes... i am wonder why you want all tools space out where the each tool have their drawers? like sockets in one drawer, wrenches in other drawer and else... i just try cramming all my tools in where they fit my needs better on my KRL1203 and KRL1003.

That would fry my brain. All my tools have to be laid out very neatly with a spot for everything.

[Deafautotech]

That would fry my brain. All my tools have to be laid out very neatly with a spot for everything.

true... but i cant afford to get bigger than what i own KRL1203 and KRL1003... it is top list what i want is KRL1203 and KRl1003.... maybe i need look for locker to put bulk tools in locker???? not right now, i dont being so busy at work so i am saving my money...

[Merkava_4]

Andy,

You have a KRL1003/1203 and you still don't have enough room? :wtf:

[Deafautotech]

Andy,

You have a KRL1003/1203 and you still don't have enough room? :wtf:

:willy_nil:eyecrazy::dunno::rolleyes::lol2::eek2: SHH SHH... i do have empty drawers but most of i have is bulk tools and use little more space... my snap on guy keep laugh at me every friday... no matter what i own or have the tools, i am keep KRL1203 and KRL1003!!! because i want stay debt-free!!

[Jokeman]

Very nice boxes......sorry to see you ride a Doo though!! Cats rule!