View Full Version : home made 3/4" rachet
bullchuck
11-12-2008, 07:25 PM
i have been lurking (and reading ) here for a while and thought i woul post. i work at a recycling place that bales up cardboard , alum. cans , plastic pop bottles and what ever else is in the stuff. we baled up some cardboard one day and one bale had a TIWAN 3/4" torque wrench sticking out the end of the bale. i pulled it out and the handle was bent like a pretzel. the head was in good shape so i cut the handle off and made a new handle. i could only salvage about 3" of the handle. i used 1 1/4" tubing for the handle. now i have a 3/4" rachet when ever i need it. all this free:bounce:
of corse this is nothing compared to the two and half pounds of canabus :pimpflashthat was found about two weeks later. had to call the cops on this one.
goodfellow
11-12-2008, 07:30 PM
That's good thinkin' -- both on the ratchet and the weed :thumbup: Good job, that's a nice ratchet
billymade
11-12-2008, 07:40 PM
Can you take the head apart and put the drive on the other side? Is on the wrong side?
Blacknwhitepit
11-12-2008, 07:45 PM
Can you take the head apart and put the drive on the other side? Is on the wrong side?
That does look kinda weird....
-BWP
bullchuck
11-12-2008, 07:49 PM
yes the head comes apart but canot be revirsed. i allready looked into that. but for what little it will be used i can live with the lever on the bottom.:beer:
zuspiel
11-13-2008, 10:58 AM
Nice job and nice first post! What kept you from posting earlier? Did you think "If I only read and not post anything, I might escape the ratchet buying addiction...":bounce:
wrenchr
11-13-2008, 11:07 AM
i have been lurking (and reading ) here for a while and thought i woul post. i work at a recycling place that bales up cardboard , alum. cans , plastic pop bottles and what ever else is in the stuff. we baled up some cardboard one day and one bale had a TIWAN 3/4" torque wrench sticking out the end of the bale. i pulled it out and the handle was bent like a pretzel. the head was in good shape so i cut the handle off and made a new handle. i could only salvage about 3" of the handle. i used 1 1/4" tubing for the handle. now i have a 3/4" rachet when ever i need it. all this free:bounce:
of corse this is nothing compared to the two and half pounds of canabus :pimpflashthat was found about two weeks later. had to call the cops on this one.
Are you sure it was not 4 lbs before calling the cops???:bounce::lol_hitti
vBulletin® v3.8.1, Copyright ©2000-2010, Jelsoft Enterprises Ltd.