The Jalopy Journal

WastedAgain440 · 03-10-2012, 05:00 PM

Any interest in this stuff? I would like to sell it locally but also would ship the stuff for actual shipping costs. First up is a drill bit index with some bits, 1-60 1/16"-1/2" A-Z. I would do $25 plus actual shipping. The cantilever box has a small sticker towards the bottom that says "Poland" I take it that's the manufacturer, It is currently filled with taps&dies tap handles a die holder and a mess of drill bits too much to list right now. I'd like to sell them together for $70 plus actual shipping costs might also split it up if there's no interest.

ihredo4 · 03-10-2012, 09:22 PM

If you decide to split this up I woud be inteested in the tap and die stuff.

WastedAgain440 · 03-11-2012, 05:35 PM

I'm gonna let this run a few days, I'll be sure and let ya know when I split it up.Thanks

ihredo4 · 03-11-2012, 09:53 PM

What is in the box anyhow? Maybe a few more specific details and I will just decide to buy the lot. Thanks.

Primered Thunder · 03-11-2012, 11:15 PM

Any way you can give us a list of the sizes of the taps and dies? Thanks.

WastedAgain440 · 03-12-2012, 09:44 AM

I'll make a list of the stuff and post it up later this evening, been kinda busy. Thanks for the interest

WastedAgain440 · 03-12-2012, 10:33 PM

So I went through the whole box, there's about 195 pieces in there. I tried making a list of sizes and what not but it got kinda over whelming. There's 65 taps,47 dies, and 70 drill bits
a few are duplicates. Also a sears thread chaser set 1/4-9/16"(sae,nf),brown&sharpe no.632 thread gauge,a made in usa die holder no.311009, weldon 82* countersink for #10,#12,#14 screws,General No.161-R ratcheting tap wrench, a Craftsman tap wrench, Stanley ratcheting tap wrench. Drill bits go up to 5/8".All the stuff is made in usa (ACE,greenfield,hanson,blackhawk,pratt&whitney,mor se,swanson,craftsman,threadwell,vermont american)taps & dies. I'm going to put together a set for myself from the duplicates and then I'll list up the sizes,I just can't see myself needing this many taps and dies. I should of held off listing this until I went through it all.

WastedAgain440 · 03-16-2012, 06:54 PM

Some more pictures of the drill index, Just gave it a quick cleaning. The drills are all usa made mostly cle line. There are some letter drills but most of them are just sae thrown in the slots.
I'll split out the taps and dies if anyone is interested.

jeffmoss26 · 03-16-2012, 07:00 PM

What kind of shape are the bits in?

WastedAgain440 · 03-16-2012, 07:18 PM

Some are sharp some aren't, A few of them have some rust.

rickcact · 03-16-2012, 08:12 PM

Are you still selling as a lot? If so, how much?

Thanks,
Rick

WastedAgain440 · 03-16-2012, 09:20 PM

Going to piece out the tap and die stuff in a different thread eventually once I go through it all agaian

jeffmoss26 · 03-16-2012, 09:39 PM

What do you estimate shipping to be on the drill bits?

ckadams00 · 03-16-2012, 09:53 PM

Shipping on the tap box to 60014?

WastedAgain440 · 03-17-2012, 11:09 AM

It's around a 5lbs. box 14"x5"x3", shoot me your zip code and I'll get a quote.

apachespeed61 · 03-19-2012, 02:07 AM

i will take the taps box. do you do pay pal?? my zip is 85032 thanks

MAYOR28 · 03-19-2012, 10:21 AM

I would be interested in the drill index, depending on shipping charges to 20659.....

03-10-2012, 09:22 PM	#2
ihredo4 Senior Member Join Date: Sep 2009 Location: 100 miles W of Daileyville in Idiotnois Posts: 1,415	Re: Drill bit index, and taps/dies, cantilever box If you decide to split this up I woud be inteested in the tap and die stuff. __________________ Searching for Craftsman BE tools Also, trying to finish a couple sets of Williams Superrenchs

03-11-2012, 05:35 PM	#3
WastedAgain440 Member Join Date: Mar 2009 Location: East Hartford,CT Posts: 98	Re: Drill bit index, and taps/dies, cantilever box I'm gonna let this run a few days, I'll be sure and let ya know when I split it up.Thanks __________________ Wanted: Snap-On KR537

03-11-2012, 09:53 PM	#4
ihredo4 Senior Member Join Date: Sep 2009 Location: 100 miles W of Daileyville in Idiotnois Posts: 1,415	Re: Drill bit index, and taps/dies, cantilever box What is in the box anyhow? Maybe a few more specific details and I will just decide to buy the lot. Thanks. __________________ Searching for Craftsman BE tools Also, trying to finish a couple sets of Williams Superrenchs

03-11-2012, 11:15 PM	#5
Primered Thunder Banned Join Date: Feb 2012 Location: A.C.A.B. Posts: 915	Re: Drill bit index, and taps/dies, cantilever box Any way you can give us a list of the sizes of the taps and dies? Thanks.

03-12-2012, 09:44 AM	#6
WastedAgain440 Member Join Date: Mar 2009 Location: East Hartford,CT Posts: 98	Re: Drill bit index, and taps/dies, cantilever box I'll make a list of the stuff and post it up later this evening, been kinda busy. Thanks for the interest __________________ Wanted: Snap-On KR537

03-12-2012, 10:33 PM	#7
WastedAgain440 Member Join Date: Mar 2009 Location: East Hartford,CT Posts: 98	Re: Drill bit index, and taps/dies, cantilever box So I went through the whole box, there's about 195 pieces in there. I tried making a list of sizes and what not but it got kinda over whelming. There's 65 taps,47 dies, and 70 drill bits a few are duplicates. Also a sears thread chaser set 1/4-9/16"(sae,nf),brown&sharpe no.632 thread gauge,a made in usa die holder no.311009, weldon 82* countersink for #10,#12,#14 screws,General No.161-R ratcheting tap wrench, a Craftsman tap wrench, Stanley ratcheting tap wrench. Drill bits go up to 5/8".All the stuff is made in usa (ACE,greenfield,hanson,blackhawk,pratt&whitney,mor se,swanson,craftsman,threadwell,vermont american)taps & dies. I'm going to put together a set for myself from the duplicates and then I'll list up the sizes,I just can't see myself needing this many taps and dies. I should of held off listing this until I went through it all. __________________ Wanted: Snap-On KR537

03-16-2012, 07:18 PM	#10
WastedAgain440 Member Join Date: Mar 2009 Location: East Hartford,CT Posts: 98	Re: Drill bit index, and taps/dies, cantilever box Some are sharp some aren't, A few of them have some rust. __________________ Wanted: Snap-On KR537

03-16-2012, 08:12 PM	#11
rickcact Senior Member Join Date: Feb 2008 Posts: 155	Re: Drill bit index, and taps/dies, cantilever box Are you still selling as a lot? If so, how much? Thanks, Rick

03-16-2012, 09:20 PM	#12
WastedAgain440 Member Join Date: Mar 2009 Location: East Hartford,CT Posts: 98	Re: Drill bit index, and taps/dies, cantilever box Going to piece out the tap and die stuff in a different thread eventually once I go through it all agaian __________________ Wanted: Snap-On KR537

03-16-2012, 09:53 PM	#14
ckadams00 Senior Member Join Date: Sep 2011 Location: Chicago, IL Posts: 744	Re: Drill bit index, and taps/dies, cantilever box Shipping on the tap box to 60014? __________________ “They’ve done studies, you know. Sixty percent of the time, it works every time.” — Anchorman Really appreciate feedback on purchases! Thanks! http://www.garagejournal.com/forum/s...d.php?t=149307 *Stop by my (very small) shop!*http://www.garagejournal.com/forum/s...d.php?t=139136

03-17-2012, 11:09 AM	#15
WastedAgain440 Member Join Date: Mar 2009 Location: East Hartford,CT Posts: 98	Re: Drill bit index, and taps/dies, cantilever box It's around a 5lbs. box 14"x5"x3", shoot me your zip code and I'll get a quote. __________________ Wanted: Snap-On KR537

03-19-2012, 02:07 AM	#16
apachespeed61 Junior Member Join Date: Mar 2012 Posts: 3	Re: Drill bit index, and taps/dies, cantilever box i will take the taps box. do you do pay pal?? my zip is 85032 thanks

03-19-2012, 10:21 AM	#17
MAYOR28 Senior Member Join Date: Mar 2010 Location: Southern MD Posts: 154	Re: Drill bit index, and taps/dies, cantilever box I would be interested in the drill index, depending on shipping charges to 20659.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode