To avoid these ads, REGISTER NOW!

Help purchasing insulated terminal die for Greenlee crimping tool

P

PureLeaf

Well-known member
Joined
Jul 25, 2014
Messages
1,417
Hey guys,

I recently purchased a Greenlee EK50ML120 (rebrand of the Klauke micro tool) for one of my workers as his hand was swelling up after spending all day crimping.

http://www.greenlee.com/products/MICROTOOL-KIT--WITH-12MM-JAW%40c--110V.html

Unfortunately I didn't realize the tool does not come with the terminal crimping dies. Greenlee lists on their website the compatible die sets as the Wezag CS30, CS150. Pandit CT-2600 and CT-300. or the Thomas and Betts Sta Kon.

The trouble I'm having is 1, locating any of these to purchase. and 2. Locating only the terminal jaws (for insulated terminals) for purchase rather then the entire tool.

If any of you guys can help me find where to buy the just the jaws (aka terminal crimping dies for insulated terminals), I'd appreciate it and so would my poor worker's swollen hand.
 
To avoid these ads, REGISTER NOW!
N

Negen

Well-known member
Joined
Jul 15, 2015
Messages
1,909
Location
Seatltle WA
I believe these are the parts you looking for from Panduit. They run about 170$ each. Digikey is our vendor. Not sure which die set you want or if you want them all.

CD-2600-P2-ND - CRIMP DIE FOR CT-2600
CD-2600-P4-ND - CRIMP DIE FOR CT-2600
CD-2600-P6-ND - CRIMP DIE FOR CT-2600
CD-2600-P8-ND - CRIMP DIE FOR CT-2600
CD-2600-PV2-ND - CRIMP DIE FOR CT-2600
CD-2600-PV4-ND - CRIMP DIE FOR CT-2600
CD-2600-PV6-ND - CRIMP DIE FOR CT-2600
CD-2600-PV8-ND - CRIMP DIE FOR CT-2600
 
OP
P

PureLeaf

Well-known member
Joined
Jul 25, 2014
Messages
1,417
Negen said:
I believe these are the parts you looking for from Panduit. They run about 170$ each. Digikey is our vendor. Not sure which die set you want or if you want them all.

CD-2600-P2-ND - CRIMP DIE FOR CT-2600
CD-2600-P4-ND - CRIMP DIE FOR CT-2600
CD-2600-P6-ND - CRIMP DIE FOR CT-2600
CD-2600-P8-ND - CRIMP DIE FOR CT-2600
CD-2600-PV2-ND - CRIMP DIE FOR CT-2600
CD-2600-PV4-ND - CRIMP DIE FOR CT-2600
CD-2600-PV6-ND - CRIMP DIE FOR CT-2600
CD-2600-PV8-ND - CRIMP DIE FOR CT-2600
Click to expand...

Thanks for the info. 170 seems kinda steep
 
OP
P

PureLeaf

Well-known member
Joined
Jul 25, 2014
Messages
1,417
PureLeaf said:
If any of you guys can help me find where to buy the just the jaws (terminal crimping dies for insulated terminals)
Click to expand...

This is what I'm looking for.

And heres a picture example, but just the jaws, not the hand tool.

ct15-500x500.jpg
 
To avoid these ads, REGISTER NOW!
O

one9gt

Well-known member
Joined
Feb 15, 2014
Messages
677
Location
San Francisco
look at the back of the manual on page 13, it shows a list of compatible dies that run 30-40 bux a pop
 
N

Negen

Well-known member
Joined
Jul 15, 2015
Messages
1,909
Location
Seatltle WA
These are less than 40$ I do not know what it is you need to crimp so I linked all the paladin tools die sets I found. That work with your tool.

Paladin Tools Coax Interchangeable die sets

http://www.alliedelec.com/paladin-tools-pa2034/70199606/
http://www.alliedelec.com/paladin-tools-pa2648/70199650/
http://www.alliedelec.com/paladin-tools-pa2649/70199467/
http://www.alliedelec.com/paladin-tools-pa2657/70199655/
http://www.alliedelec.com/paladin-tools-pa2653/70199652/
http://www.alliedelec.com/paladin-tools-pa2046/70199612/
http://www.alliedelec.com/paladin-tools-pa2047/70199613/
http://www.alliedelec.com/paladin-tools-pa2051/70199944/
http://www.alliedelec.com/paladin-tools-pa2045/70199611/
http://www.alliedelec.com/paladin-tools-pa2042/70199608/
http://www.alliedelec.com/paladin-tools-pa2656/70199654/
http://www.alliedelec.com/paladin-tools-pa2039/70199607/
http://www.alliedelec.com/paladin-tools-pa2699/70199674/

Paladin Tools Modular RJ45 die sets
http://www.alliedelec.com/paladin-tools-pa2061/70199615/
http://www.alliedelec.com/paladin-tools-pa2062/70199945/
http://www.alliedelec.com/paladin-tools-pa2063/70199616/
http://www.alliedelec.com/paladin-tools-pa2064/70199617/
http://www.alliedelec.com/paladin-tools-pa2068/70199620/
http://www.alliedelec.com/paladin-tools-pa2032/70199605/
http://www.alliedelec.com/paladin-tools-pa2673/70199666/
http://www.alliedelec.com/paladin-tools-pa2674/70199667/
http://www.alliedelec.com/paladin-tools-pa2687/70199671/
http://www.alliedelec.com/paladin-tools-pa4003/70229958/

Paladin Tools Insulated Terminal Crimpers
http://www.alliedelec.com/paladin-tools-pa2035/70199942/
http://www.alliedelec.com/paladin-tools-pa2040/70199943/
http://www.alliedelec.com/paladin-tools-pa2029/70199940/

Paladin Tools NON-Insulated Terminal Crimpers
http://www.alliedelec.com/paladin-tools-pa2031/70199604/

Paladin Tools Open Barrel die sets
http://www.alliedelec.com/paladin-tools-pa2033/70199941/
http://www.alliedelec.com/paladin-tools-pa2096/70199624/
http://www.alliedelec.com/paladin-tools-pa2097/70199625/

Paladin Tools Wire Ferrules die set
http://www.alliedelec.com/paladin-tools-pa2095/70199946/
 
OP
P

PureLeaf

Well-known member
Joined
Jul 25, 2014
Messages
1,417
Negen said:
These are less than 40$ I do not know what it is you need to crimp so I linked all the paladin tools die sets I found. That work with your tool.

Paladin Tools Coax Interchangeable die sets

http://www.alliedelec.com/paladin-tools-pa2034/70199606/
http://www.alliedelec.com/paladin-tools-pa2648/70199650/
http://www.alliedelec.com/paladin-tools-pa2649/70199467/
http://www.alliedelec.com/paladin-tools-pa2657/70199655/
http://www.alliedelec.com/paladin-tools-pa2653/70199652/
http://www.alliedelec.com/paladin-tools-pa2046/70199612/
http://www.alliedelec.com/paladin-tools-pa2047/70199613/
http://www.alliedelec.com/paladin-tools-pa2051/70199944/
http://www.alliedelec.com/paladin-tools-pa2045/70199611/
http://www.alliedelec.com/paladin-tools-pa2042/70199608/
http://www.alliedelec.com/paladin-tools-pa2656/70199654/
http://www.alliedelec.com/paladin-tools-pa2039/70199607/
http://www.alliedelec.com/paladin-tools-pa2699/70199674/

Paladin Tools Modular RJ45 die sets
http://www.alliedelec.com/paladin-tools-pa2061/70199615/
http://www.alliedelec.com/paladin-tools-pa2062/70199945/
http://www.alliedelec.com/paladin-tools-pa2063/70199616/
http://www.alliedelec.com/paladin-tools-pa2064/70199617/
http://www.alliedelec.com/paladin-tools-pa2068/70199620/
http://www.alliedelec.com/paladin-tools-pa2032/70199605/
http://www.alliedelec.com/paladin-tools-pa2673/70199666/
http://www.alliedelec.com/paladin-tools-pa2674/70199667/
http://www.alliedelec.com/paladin-tools-pa2687/70199671/
http://www.alliedelec.com/paladin-tools-pa4003/70229958/

Paladin Tools Insulated Terminal Crimpers
http://www.alliedelec.com/paladin-tools-pa2035/70199942/
http://www.alliedelec.com/paladin-tools-pa2040/70199943/
http://www.alliedelec.com/paladin-tools-pa2029/70199940/

Paladin Tools NON-Insulated Terminal Crimpers
http://www.alliedelec.com/paladin-tools-pa2031/70199604/

Paladin Tools Open Barrel die sets
http://www.alliedelec.com/paladin-tools-pa2033/70199941/
http://www.alliedelec.com/paladin-tools-pa2096/70199624/
http://www.alliedelec.com/paladin-tools-pa2097/70199625/

Paladin Tools Wire Ferrules die set
http://www.alliedelec.com/paladin-tools-pa2095/70199946/
Click to expand...

Awesome thanks!
 
N

Negen

Well-known member
Joined
Jul 15, 2015
Messages
1,909
Location
Seatltle WA
The brands you listed are in the op are all very expensive I would think are designed for governments or large corporations who use the general public to fund their budgets.

Paladin tools are what are listed in the back of the users manual. I guess are designed for normal people. You might find locations where the dies are cheaper but that site sells all the die's made by paladin. So you can buy the one that suites your crimping needs. If you get a rj45 die make sure you pay attention to which one your buying as some standards are not the same.
 
Last edited:
OP
P

PureLeaf

Well-known member
Joined
Jul 25, 2014
Messages
1,417
Yea I appreciate the help. Managed to pick up a thomas and betts insulated terminal crimp for 50 dollars, and the RJ11 Paladin tools crimp for 30 bucks, and that covers my needs.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom