To avoid these ads, REGISTER NOW!

official Trident hot deals thread?

B

b7labelle

Well-known member
Joined
Oct 14, 2012
Messages
665
Location
Michigan
Mike-Trident said:
CARLOS: I AM YOUR FATHER (best Darth Voice). KEEP BUYING CARLOS. KEEP BUYING. MU HA HA HA!

AH HM. Sorry about that.

Best Regards,
Mike
Click to expand...



ah thanks for that laugh. I'm glad no one can hear me at work. Is it unethical to tool shop while I'm on the clock?
 
To avoid these ads, REGISTER NOW!
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
SignalZero said:
Just ordered the GW 84tooth cushion grip 3/8 ratchet and a socket to fill a gap on my 1/4 drive SAE tray. :rocker: Looking forward to having a new "go-to" ratchet.
Hope it's okay that I used the Facebook code for 20% with the GJ shipping code. I had trouble with the GJ 20% code, but it was my fault. I wasn't putting in the "-20". Figured that out when I did the FB code. I still listed my GJ username in comments.

Thanks!
-Paul
Click to expand...

Hey Paul:
For you! No problem on using the code for free shipping :) over $40.
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
HOOT40 said:
I just made another good purchase. thanks Mike
Click to expand...

Thanks Hoot! Since both items were in stock and Chris is running to FedEx to drop them off now since they already picked up for the day.

If we have an item in stock, we can usually ship the same day as late as 5pm.

However, 2 is the official cut off... Just depends on how busy we are. But, as always, let us know if you need something ASAP and we can always try to push it out late.

Mike


20% Off sale ends at midnight!
 
H

HOOT40

Active member
Joined
Feb 13, 2013
Messages
38
very nice, I place an order at 4:45 on Tuesday and it has delivered to me at 10:57 weds

nice work Mike
 
OP
T

toolstools

Banned
Joined
Jan 30, 2013
Messages
1,194
Location
Cambridge ohii
Mike -

I'm looking at the 14 piece gear wrench combination wrench sets in both sae and metric. But the page doesn't show the sizes. Could you post them for me or pm me? Also what is your.number again with extention please? I plan on placing an order in the next week or less but would rather do by phone. Can I still get the discounts that way and free shipping?

This beats me paying $107 plus $20 in fuel for the two 10 piece dewalt wrench sets I planeed on getting.

Also, do these sets come in a roll or loose? Its ok either way.
 
OP
T

toolstools

Banned
Joined
Jan 30, 2013
Messages
1,194
Location
Cambridge ohii
Mike -

I'm looking at the 14 piece gear wrench combination wrench sets in both sae and metric. But the page doesn't show the sizes. Could you post them for me or pm me? Also what is your.number again with extention please? I plan on placing an order in the next week or less but would rather do by phone. Can I still get the discounts that way and free shipping?

This beats me paying $107 plus $20 in fuel for the two 10 piece dewalt wrench sets I planeed on getting.

Also, do these sets come in a roll or loose? Its ok either way.
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
HOOT40 said:
very nice, I place an order at 4:45 on Tuesday and it has delivered to me at 10:57 weds

nice work Mike
Click to expand...

Thanks Hoot, we try.

Also, we just placed the order for everyones stuff for the promo. Some (whatever was in stock) shipped already and the rest is on order.
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
toolstools said:
Mike -

I'm looking at the 14 piece gear wrench combination wrench sets in both sae and metric. But the page doesn't show the sizes. Could you post them for me or pm me? Also what is your.number again with extention please? I plan on placing an order in the next week or less but would rather do by phone. Can I still get the discounts that way and free shipping?

This beats me paying $107 plus $20 in fuel for the two 10 piece dewalt wrench sets I planeed on getting.

Also, do these sets come in a roll or loose? Its ok either way.
Click to expand...


Hey ToolsTools, can you provide me a PN just so I make sure to get the correct things priced?
Also, yes, I can use coupon codes on phone orders, that is no problem at all.

Mike
 
OP
T

toolstools

Banned
Joined
Jan 30, 2013
Messages
1,194
Location
Cambridge ohii
Mike-Trident said:
Hey ToolsTools:
We have it for 57.99 for 81924 and $49.28 of course you get 10% off.
Click to expand...

Hmm that's odd, the site shows $54 and $58. So they are the price you listed plus 10% off? Is there tax? Could you let me know the exact price so I know how much to put on my debit card?

Also, what sizes are included in each kit?

Thanks Mike.
 
To avoid these ads, REGISTER NOW!
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
toolstools said:
Hmm that's odd, the site shows $54 and $58. So they are the price you listed plus 10% off? Is there tax? Could you let me know the exact price so I know how much to put on my debit card?

Also, what sizes are included in each kit?

Thanks Mike.
Click to expand...

Tools:
Refresh the product pages again. I updated the pricing.
 
OP
T

toolstools

Banned
Joined
Jan 30, 2013
Messages
1,194
Location
Cambridge ohii
To put all my questions in one post
Do they come in a roll or rack or loose?
Total price so I know what to out on my debut card?
Sizes in each set?
Are they in stock?
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
toolstools said:
To put all my questions in one post
Do they come in a roll or rack or loose?
Total price so I know what to out on my debut card?
Sizes in each set?
Are they in stock?
Click to expand...

Hey Tools:
Just got home from dinner... To answer your questions:
My sheet tells me that they are boxed. They do not say in a vinyl roll, so I don't quite know how they are going to arrive. They also don't say blow molded case, just "boxed."
I don't have any in stock, but I can get them in about a week.

There is tax if you are in TX. $98 + 8.25% tax is correct.

Mike
 
OP
T

toolstools

Banned
Joined
Jan 30, 2013
Messages
1,194
Location
Cambridge ohii
Mike-Trident said:
Hey Tools:
Just got home from dinner... To answer your questions:
My sheet tells me that they are boxed. They do not say in a vinyl roll, so I don't quite know how they are going to arrive. They also don't say blow molded case, just "boxed."
I don't have any in stock, but I can get them in about a week.

There is tax if you are in TX. $98 + 8.25% tax is correct.

Mike
Click to expand...

Sounds good. So I'm correct on the sizes? BTW I dont care how they come because they will be put in wrench racks. I live in Ohio, so no tax AMD $98 covers me correct?

Sorry just wanna get the details down as this is the first time I've ordered anything.
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
toolstools said:
Sounds good. So I'm correct on the sizes? BTW I dont care how they come because they will be put in wrench racks. I live in Ohio, so no tax AMD $98 covers me correct?

Sorry just wanna get the details down as this is the first time I've ordered anything.
Click to expand...

Yes Sir, you are correct.
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
toolstools said:
Cool. Probably place my order Friday.

Any insight on the new promo?
Click to expand...

Since everyone wants American Made, we have been looking at a small, easy, inexpensive set of products made by Allen like:

Allen- 9-Key Duracast® SAE Hex Key Fold-up Set
023-56349-1.jpg


We have three different types, all made in the US in stock. We have not determined pricing just yet.
 
7

71goldss

Well-known member
Joined
May 23, 2012
Messages
1,513
Location
Northern Calif
Received my 3pc Gearwrench 120xp ratchet set from Trident today. Very pleased with them so far. Used all three sizes pretty extensively this afternoon along side my Craftsman thin profile set. I've never had round handled ratchets before and they fit my hand great and feel very comfortable. In all honesty though, I really can't tell the difference in tooth count between these and my 60 tooth Cmans. I thought there would be a very noticeable difference, but not seeing it. Still, great ratchets so far, and I still plan on picking up the 120xp 4pc flex head set.
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
Who lives in the dallas area?

71goldss said:
Received my 3pc Gearwrench 120xp ratchet set from Trident today. Very pleased with them so far. Used all three sizes pretty extensively this afternoon along side my Craftsman thin profile set. I've never had round handled ratchets before and they fit my hand great and feel very comfortable. In all honesty though, I really can't tell the difference in tooth count between these and my 60 tooth Cmans. I thought there would be a very noticeable difference, but not seeing it. Still, great ratchets so far, and I still plan on picking up the 120xp 4pc flex head set.
Click to expand...

Hey 71, Thanks for the insight.

QUESTION For Everyone:

WHO LIVES IN THE DALLAS AREA? I am thinking about hosting a lunch and inviting my Apex (GearWrench, Crescent, Wiss, Armstrong, etc...) rep out to meet everyone.
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
Loscaldazar said:
Hey Mike!

Can you see if you can get gearwrench 3836 ratcheting pliers set?
Click to expand...

Hey Loscaldazar:
I have had multiple requests for this but it appears to be discontinued.

I checked my online dealer portal and nothing shows up. I checked my pricing file, again nothing. I even checked my CD with images/data and again nothing...

I just emailed my rep and am having him check on it. It seems way too popular for them to discontinue, but lets see.

Mike
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
Friday Promo

7.jpg

This weekend, we are offering Allen Brand Fold Up Hex Key sets.

We have the following sets IN STOCK:
56346 $9.16
56347 $10.20
56349 $9.34

All sets ship for $3 via USPS. If you order other products and are under $40 in total, please use standard shipping. If you are over $40 and order other products, please feel free to use your GJ Coupon code for free shipping. GJ0613-FS

All sets are MADE IN THE USA.
 
Last edited:
G

gagreen

Well-known member
Joined
Mar 22, 2013
Messages
779
Location
Colorado
Your service is top notch, not something I would ever put with an industrial supply place and a low volume buyer like me. Got my Blackhawk and Proto order in today well packaged and with your catalog. This will not be my last order. Thanks again
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
gagreen said:
Your service is top notch, not something I would ever put with an industrial supply place and a low volume buyer like me. Got my Blackhawk and Proto order in today well packaged and with your catalog. This will not be my last order. Thanks again
Click to expand...

Thanks Buddy! We appreciate it :rocker:
 
M

Mike-Trident

Well-known member
Joined
Jun 13, 2013
Messages
328
Location
Royse City, TX
July 4th Promo

Folks, we are having a 20% off July 4th promotion going on now.

You get 20% off everything in the store. Feel free to use your GJ Free shipping code as well.

Promo code: July4

Mike
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom