Found a deal on craigslist? - List Here!

[PFSard]

Here's a possibility for Arizona folks. I just bought a drill press a few months ago or ....

Grizzly Drill Press - $120 (Chandler)
http://phoenix.craigslist.org/evl/tls/4408363669.html

G7944 12 Speed Heavy-Duty 14" Floor Drill Press
https://www.grizzly.com/products/12-Speed-Heavy-Duty-14-Floor-Drill-Press/G7944

 

[macgee]

Thoughts?

http://dallas.craigslist.org/ndf/tls/4403607169.html

It's a bit too much but Baldors are nice, I do see them for less in my area.

There's great debate about low rpm vs high rpm grinders as most grind wheels are designed be ideally spun at 5000 to 5500 surface feet per minute which is the optimum speed for aluminum oxide . I do like using a lower speed grinder with wire wheels.

 

[macgee]

Older (good quality) Craftsman 10 drawer in excellent condition $80

http://losangeles.craigslist.org/sgv/tls/4408777480.html

That did last long: Sold in 1 hour

 

[RivennHewn]

http://seattle.craigslist.org/see/tls/4407877376.html

Cool old mini lathe in W. Seattle

 

[macgee]

SHELDON METAL LATHE 10X24
http://losangeles.craigslist.org/lgb/tls/4411401076.html

 

[rpenterics]

Not much of a deal but a box I've never seen:
Herbrand Tool Box

http://annarbor.craigslist.org/tls/4410617529.html

 

[samg430]

http://chattanooga.craigslist.org/tls/4413223424.html

 

[Hpozzuoli]

Here's a good box loaded with tools in RI.


http://providence.craigslist.org/tls/4409792537.html

 

[PFSard]

I wish I had room for this.

Garage Work Table (Chandler, AZ)
http://phoenix.craigslist.org/evl/zip/4414883979.html

Free - Heavy duty work table for the garage. Roughly 9 feet long by 3 feet wide. Very heavy!
Wood top, steel/metal legs.

If you can pick it up and load it - it is yours!

 

[FlyingLow]

http://victoria.en.craigslist.ca/tls/4411579210.html

Big old woodworking machine

 

[Sleipnir]

Here's a good box loaded with tools in RI.


http://providence.craigslist.org/tls/4409792537.html

He just dropped 1,000$...

 

[1Garageman]

http://victoria.en.craigslist.ca/tls/4411579210.html

Big old woodworking machine

That would take a lot of time and possibly money to restore so you could use it.
But damn it would be nice!

 

[R6 Racer]

Just came across this on Kijiji just north east of Toronto.

http://www.kijiji.ca/v-tool-other/kawartha-lakes/80-gal-compressor-tank/582144308

A 80 gallon devilbis air tank for $20.00


Steve

 

[macgee]

FOR SALE; Vintage 1948 - 1963 "Craftsman" wall hung tool display box - $130 (Burbank, CA)

Not the cheapest and a bit scruffy but pretty cool

http://losangeles.craigslist.org/sfv/tls/4412332820.html

 

[texasfiremedic]

http://sanangelo.craigslist.org/tls/4400596910.html

Good arbor press. He says it is going to scrap if not sold.

 

[RivennHewn]

http://seattle.craigslist.org/tac/tls/4409346757.html


HUGE 150 LB Antique Vise - Vanderman

 

[texasfiremedic]

http://dallas.craigslist.org/ndf/tls/4413708086.html

I'm not the seller but looks like a good deal on Kennedy boxes

How come things always come up when I'm offshore?

 

[zkling]

The title of this thread is a bit misleading at times.

Not much of a deal but a box I've never seen:
Herbrand Tool Box

I've never seen a herbrand like that. I'm not sure how accurate the description and history the seller states are. Looks like a MBC made box to me.

 

[Mavawreck]

http://delaware.craigslist.org/tls/4419539734.html

Walker Turner Belt/Disc with motor for $80.00

I'd love it but I'm spent out for the next few months

 

[Voi]

http://delaware.craigslist.org/tls/4419539734.html

Walker Turner Belt/Disc with motor for $80.00

I'd love it but I'm spent out for the next few months

I'd find a way to buy that one. That's very cool.

 

[Mavawreck]

I'd find a way to buy that one. That's very cool.

Uh, I know it. Doesn't help I've been casually looking for one for awhile.

There will be others.

 

[NKlamerus]

Never knew there was a market for these...but it sure looks cool for a compressor!

http://okaloosa.craigslist.org/atq/4420374031.html

 

[ddawg16]

Shear.....Los Angeles area...$500.....not a 'great' price....but....not bad...

http://losangeles.craigslist.org/sgv/tls/4425191281.html

 

[1Garageman]

This seems like a good deal, but I am not sure.
The motor alone is 14HP!!

5500 watt generator - $150


Needs new fuel hose but in decent condition. 14 HP motor.Ran entire house off it in bad storm 5 years back.6145375833

 

[ggoss]

Great price, didn't get any details. Not feeling like making the drive ATM, so here you go:

Bench Drill Press

http://miami.craigslist.org/brw/tls/4426224625.html

Buffalo Bench Drill Press. Antique - 40 + years. Needs new motor. Dad wants it out of his garage.

 

[Restore B4 Paying More]

Is this a good deal or no?

LOCATION Kernan Beach, FL

ITEM MAC top box w/tools

PRICE 225

LINK http://jacksonville.craigslist.org/tls/4421012721.html

 

[Jeepster425]

Damn good deal

http://seattle.craigslist.org/kit/tls/4426542479.html

 

[1Garageman]

Damn good deal

http://seattle.craigslist.org/kit/tls/4426542479.html

WOW that is one hell of a deal!!!!!!!!!

 

[sgs236]

Region: East

Location: Charleston WV

Item: Mac Tools Davey Allison Toolbox

Price: $450

Link: http://charlestonwv.craigslist.org/tls/4426585427.html

 

[NKlamerus]

Okaloosa florida

Huge box...

http://okaloosa.craigslist.org/pts/4385041207.html

 

[UIUC-Mech-E]

I don't know what these normally go for but this is a neat old grease pump. Might be a good addition to someone's vintage garage .

http://chicago.craigslist.org/wcl/atq/4420807041.html



(Insert catchy saying here)

 

[Hpozzuoli]

This guy doesn't post a price, but he has a lot of stuff for sale.

http://boston.craigslist.org/nos/tls/4432136467.html

 

[McLean]

Seattle, WA Area (Milton)

Snap On Toolbox, Model KR-661

Price: $850

http://seattle.craigslist.org/tac/tls/4432196564.html

I dont really follow the going rate of these and this one sounds like it might need a little lovin', but hopefully it is a great deal for someone!

 

[Gareth68]

This looks like a lot of box for the money....

http://columbiamo.craigslist.org/tls/4433612597.html

 

[PFSard]

Tool Chest Roll Away - $15 (Gilbert)
http://phoenix.craigslist.org/evl/tls/4435290230.html

Get it while it's hot.

 

[riggs1117]

Columbian bench vise near Pittsburgh 25$

http://pittsburgh.craigslist.org/tls/4435666431.html

 

[R6 Racer]

Columbian bench vise near Pittsburgh 25$

http://pittsburgh.craigslist.org/tls/4435666431.html

That didn't last long. Gone already!

Steve

 

[exmaxima1]

Re: Unisaw in Chicago South Subs---$250

You won't find one cheaper!

http://chicago.craigslist.org/sox/tls/4436563688.html

 

[1Garageman]

Re: Unisaw in Chicago South Subs---$250

You won't find one cheaper!

http://chicago.craigslist.org/sox/tls/4436563688.html

I have never even heard of an 11 horse power table saw before

 

[Zippercat]

Vice for $20. Anybody know anything about this one? I've never seen one like this.

http://charlotte.craigslist.org/tls/4436282967.html