any chance you can post what the print out looks like?Picked up a Control Tech torque wrench...
James
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
James
lordabraxis
Active member
Here's a few things I picked up over the weekend:
the torque wrench was about $10, the brushes about $1, kobalt pliers about $10, 12 piece screwdriver set about $5, the 100 piece bit set about $7 and the flashlight, tape measure and 6 piece screwdriver set were all free. All this for about $33, yeah I'm pretty happy
the torque wrench was about $10, the brushes about $1, kobalt pliers about $10, 12 piece screwdriver set about $5, the 100 piece bit set about $7 and the flashlight, tape measure and 6 piece screwdriver set were all free. All this for about $33, yeah I'm pretty happy
Linda@Lista
Well-known member
This big box came through ups today. A little overkill in the box for what it was but props to lista!!
I been looking for some thin plastic bins for little little stuff. I already have large trays from Ernst but I wanted small ones.
Found some from lista. Anyone looking for some check them out. These were $2.24 a piece with free shipping directly through lista.
They are 3x6 and even come with label tags that can slide in the box
Total bill shipped to my house....$6.72!!!
Sent from my iPhone 5s using Tapatalk
@90zcar - So happy you're pleased with your purchase! Thank you for the mention.
abvw
Well-known member
Nothing wrong with that, they've spent the time and resources to hand pick all the good and/or best tools so you don't waste time and money doing trial and errors to see what works.
Research and development takes time and money, and that is why Matco's "markup" is worth paying for. It's not like they charge you a premium and have you deal with the OEM directly for warranty claims.
The biggest ripoff is Mac. You might as well buy Stanley stuff from department stores.
Had some points expiring soon so i got the 2pc craftsman knipex cobra set.
Interesting. I just bought the 10 inchers at Sears. They came in Craftsman packaging, but the pliers say Knipex on them. It does not say Craftsman anywhere on the pliers.
articsilber323
Well-known member
got a set of wright grip SAE set in today and a set of lang snap ring pliers, love the chrome on the wright grip way better then any of my gear wrench stuff
geojag
Well-known member
10" Knipex pliers wrench last week
And 7&10" craftsman branded Cobras this week, with a mini work light to get the total over $50 for a coupon.
And 7&10" craftsman branded Cobras this week, with a mini work light to get the total over $50 for a coupon.
jgreen-fsi
Well-known member
How do you like those Lang snap ring pliers so far?
fireeqpsrv
ALLIANCE MEMBER
Picked up a few things from the Gearwrench Hot Deals page.
Oil Canister sockets
http://www.gearwrench.com/MagentoSh...3525d08d6e5fb8d27136e95/G/W/GW_41830_FRNT.jpg
insulated screwdrivers
http://www.gearwrench.com/MagentoSh...08d6e5fb8d27136e95/G/W/GW_80063_FRNT_MAIN.jpg
bit sets
http://www.gearwrench.com/MagentoSh...08d6e5fb8d27136e95/G/W/GW_80585_FRNT_MAIN.jpg
and
http://www.gearwrench.com/MagentoSh...5d08d6e5fb8d27136e95/G/W/GW_9536_INSTOR01.jpg
Oil Canister sockets
http://www.gearwrench.com/MagentoSh...3525d08d6e5fb8d27136e95/G/W/GW_41830_FRNT.jpg
insulated screwdrivers
http://www.gearwrench.com/MagentoSh...08d6e5fb8d27136e95/G/W/GW_80063_FRNT_MAIN.jpg
bit sets
http://www.gearwrench.com/MagentoSh...08d6e5fb8d27136e95/G/W/GW_80585_FRNT_MAIN.jpg
and
http://www.gearwrench.com/MagentoSh...5d08d6e5fb8d27136e95/G/W/GW_9536_INSTOR01.jpg
I wasn't so happy the next day when I actually looked at my bank statement and seen a big shipping charge on there for the 3 little boxes when I was told there was no charge.
It's ok tho I called the next day and they refunded me half of the shipping charge which I'm fine with but they clearly did tell me on the phone when I ordered them that they take care of the shipping.
Sent from my iPhone 5s using Tapatalk
doan
Well-known member
I joined the vintage CM ratchet club today with these arrivals. I need to stay off ebay for a while
How much for the spinner ratchet, if you don't mind me asking.
upgrading
Well-known member
Was there any COO info on that set ?
fireeqpsrv
ALLIANCE MEMBER
I will look and let you know I did not check
d.mcfarland
Well-known member
panknuckshovel
Well-known member
fireeqpsrv
ALLIANCE MEMBER
Can't find the original package but I believe tiawan
Sent from my iPhone using Tapatalk
stovebolt6
Well-known member
Ran to Napa to get a battery and saw a new display - finally here in Canada we have some of the nice Carlyle tools you guys get in the U.S. (except they're marketed under the name UltraPro). Picked up the 90t ratchet to try out. Used it to replace the battery. I like it.
Attachments
nice!!! Been waiting for that!! What's the price like?
KamiCrit
Well-known member
Old-Soul
Well-known member
Does that UltraPro have a plastic selector switch?
mrsnapon
Well-known member
stovebolt6
Well-known member
They're pricey, so apparently that's no different either. I think this ratchet was $63, but with my AMA card I get everything 10% off.
Nope it appears to be all metal.
i hope we get the flank drive wrenches too!!!
I have a set of UltraPro wrenches that are 'almost' Carlyle. The open end is normal, but the box end isn't chamfered just like the Carlyle wrenches.
toy4whatever
Well-known member
My greenies showed up today.
mrsnapon
Well-known member
My greenies showed up today.
Sweet!
XxToolAholicxX
Well-known member
Here's a few things I picked up over the weekend:
the torque wrench was about $10, the brushes about $1, kobalt pliers about $10, 12 piece screwdriver set about $5, the 100 piece bit set about $7 and the flashlight, tape measure and 6 piece screwdriver set were all free. All this for about $33, yeah I'm pretty happy
I have those too. They are the same as Craftsman and Matco as they are all Chinese now. Oh these are a little better they are Taiwan. LOl
---------------------------------------------------------------------------------------------------
I am a Toolaholic,Sometimes I regret it,Especially when the Toolman wont give me no credit
mrsnapon
Well-known member
very nice!
Thx. I'm pretty much done buyen tools, I'm not very healthy n these tools I just wanted, didn't need em.
jsharpphoto
Well-known member
I got my late Christmas present from my mom. A pair of the TOUGHBUILT sawhorses with adjustable legs. These things are a tank. I haven't built a work table with them yet, but I don't fought the 2600 LBS capacity. 
xurusaibobx
Well-known member
- Joined
- Jul 23, 2011
- Messages
- 365
My greenies showed up today.
snap on promos those long pick set with new handles but you always get the old stock handles.
my dealer ordered me 2 sets both old set then he stripped them and installed new handles for me
Old-Soul
Well-known member
Good to hear. Don't suppose you have the SKU# do you?
I went in there to look at the long-reach 3/8 the other day and the UltraPro ratchet they had there had a plastic selector switch and the head felt really "loose", didn't feel like it was worth the $70 at all...
Crown Imperial
Well-known member
KRA2422MCF
gloss black, carbon drawer guard, textured corners/bottom guards
**** that looks awesome even if a lil ricey.
Are the CF trims self made or Snap on OE?
EDIT: Oh that's OE from Snap on. Kewl!
$5 1/2K is a lot of dough though.
Last edited:
Picked up some stuff. Some SnapOn long ball hex sockets. SnapOn 1/4 standard impact socket sets. Some free knipex cutters. A boot for the Ct8850. The big set is a 3/8 drive Atd impact socket set. I'm very impressed in the quality of these. I have the Atd 1/2 inch crowsfoot set and the angle wrench set. Those are very poor quality.
http://www.napacanada.com/en/Promotions/StoreSpecials.aspx
click flyer, prices are actually really good considering the fact they are trying to compete with the big boys
articsilber323
Well-known member
i haven't had a chance to use them yet but are made very well and in the usa, i think lang is the oem for snap on. huge upgrade from my hf set that kept bending