Found a deal on craigslist? - List Here!

[bmxdad]

http://sfbay.craigslist.org/scz/cto/4843490182.html
$3000 fc150
Too far away for me.

What a steal ... wish that was closer.

 

[CNGsaves]

^ ^ ^ Easy one day Roadtrip !!! Bed will fit your BMX bikes also !!

Now may need to drive back all night . . . but hey, roadtrips are fun and the truck is already on a trailer. Ask Seller to sweeten the pot, throw in the trailer !!

 

[dngrmse]

Wow! The possibilities with that thing are endless! That would make a cool beach buggy with a lift kit, big knobbies and a custom bumper!

 

[Jarhead0408]

Cool garage/auto cabinets. A little steep at $100 though.



http://raleigh.craigslist.org/tls/4848763086.html

 

[ddawg16]

If I had the money, I'd buy this....

http://phoenix.craigslist.org/nph/cto/4845910849.html

 

[larryq]

Cincinnati Pedestal Grinder - $500 (Inglewood)

What a beast that must be. Great find, I wonder how old it is, any guesses?

Can you run 3-phase power from a residential address?

 

[Dugan]

What a beast that must be. Great find, I wonder how old it is, any guesses?

Can you run 3-phase power from a residential address?

3 different ways other than paying for a line tap.

Static power converter, Variable Frequency drive(VFD), using a single phase motor to create a field.

http://www.finewoodworking.com/workshop/qa/three-phase-machines-in-shop.aspx

 

[CNGsaves]

Not really Craigslist . . . but could be screaming deal if you're in area.

DIESEL truck owners take note . . . hell, Tractor Truck 18 wheelers LOOK !!

Region: West USA

Location: Barstow, CA

Item Description: Norco 20 ton floor jack (2011), Model 72220A - - - Quantity 2
. . . . . These are $2,200 to $2,500 EACH at Retail !!

Price: Opening Bid $25
. . . . . . . . Auction Closes 1/21/15 5 pm Eastern

Link:
http://www.govliquidation.com/auction/view?auctionId=8930535

 

[bryanrj]

Richmond, Va: 16" ? Royal Driill Press, bench model

Old school, ball bearing quill. Looks to be complete except for the chuck. Probably could negotiate a better price because of that. OWWM has some info under manufacturer, Canedy-Otto Manufacturing.

http://richmond.craigslist.org/tls/4795141791.html

 

[Waggoner72]

Old school drill press for $50 in central arkansas.
It's not too far from me but not in my interest. I know a lot of y'all like them though.

Drill Press $50
http://littlerock.craigslist.org/tls/4829892515.html

 

[reader2580]

Bessey Bench Vise BVHW45 - $30 (Lino Lakes)
Seems like a deal
https://minneapolis.craigslist.org/hnp/tls/4838343751.html

This is only a few miles from me, but not a deal. This model is $30 in stock at Home Depot.

 

[Cypherian]

http://delaware.craigslist.org/tls/4850877461.html

Rolling work bench Super Heavy Duty - $650 (Elkton)


Storage Master Rolling work bench, Knaack War Wagon. Capacity 2500lb, 8 drawers, 62" x 32". Like new condition. Cost 3400$ new. Sell 650$ call or txt








I checked this is 1.9k to 2.5k if you can and want it I would JUMP ON IT!!
https://www.google.com/?gws_rd=ssl#q=Knaack+War+Wagon

Cypher

 

[Colin Len]

Location: SoCal - Hemet
Looks like a great deal here on some Vidmar cabinets:
http://inlandempire.craigslist.org/tls/4847628895.html

I'm very tempted to pick these up but I don't think it makes sense right now since I'd need to spend another few hundred on shelves and I'm not even sure if I could fit all of them in my garage.

 

[PCMusicGuy]

New Quincy Compressor in Houston. Perfect for home use.

http://houston.craigslist.org/tls/4859221384.html

 

[1Garageman]

3 impacts - $30 (pataskala)
$30 for all 3!

http://columbus.craigslist.org/tls/4860375903.html

 

[thecollector]

Miller 252

I finally get to contribute. Ad says new still on pallet for 1500.

http://kansascity.craigslist.org/tls/4860904628.html

 

[jeffgbook]

Re: Miller 252

I finally get to contribute. Ad says new still on pallet for 1500.

http://kansascity.craigslist.org/tls/4860904628.html

^^That^^ looks like a good deal. Hopefully a GJer close by can snag that bad boy.

 

[Mohawk Dave]

Location: SoCal - Hemet
Looks like a great deal here on some Vidmar cabinets:
http://inlandempire.craigslist.org/tls/4847628895.html

I'm very tempted to pick these up but I don't think it makes sense right now since I'd need to spend another few hundred on shelves and I'm not even sure if I could fit all of them in my garage.

I met with that dude the other day, Mitch. Really cool guy. Engineer. Same reason I passed, shelves are $$$ and I don't have time to make them. I bought other stuff from him though.

 

[jeffgbook]

Not up to par on tool box prices but he says this one sells for $2390. In Bacliff,TX. Over in the Kemah/League City area.

http://houston.craigslist.org/tls/4851380963.html

 

[jeffgbook]

Anybody in the Houston area looking for a 220V compressor?

http://houston.craigslist.org/tls/4861010826.html

 

[CNGsaves]

Anybody in the Houston area looking for a 220V compressor?

http://houston.craigslist.org/tls/4861010826.html

^ ^ ^ $950 for Husky 60 gal compressor is no bargain. Pass.

READ the 1st post of this thread. These posts with no information will soon be worthless if CL ad closes. No one on GJ will have a clue what you were talking about.

 

[jeffgbook]

^ ^ ^ $950 for Husky 60 gal compressor is no bargain. Pass.

READ the 1st post of this thread. These posts with no information will soon be worthless if CL ad closes. No one on GJ will have a clue what you were talking about.

From what I could find it's like half of what it lists for, but I didnt know about quality. Thanks for running interference.

 

[Catadj78]

Location: SoCal - Hemet
Looks like a great deal here on some Vidmar cabinets:
http://inlandempire.craigslist.org/tls/4847628895.html

I'm very tempted to pick these up but I don't think it makes sense right now since I'd need to spend another few hundred on shelves and I'm not even sure if I could fit all of them in my garage.

seems like a good deal for all 4, make some shelves

 

[larryq]

An interesting, old-school vise for $50 in Sacramento CA. Not sure about that static jaw however...looks like a channel has been cut from it-- Anyone else see the same thing?

Anyway:

http://sacramento.craigslist.org/tls/4850351727.html

 

[JPD Motorsports]

Location: bartonville tx
Item: Matco tool box top and bottom for 2500.00
Link: https://dallas.craigslist.org/dal/tls/4860461098.html

 

[PFSard]

This look like cabinets I bought last year on CL. They were originally in Home Depot. I wish I had room for two more.
----------------------------------

Tool or parts drawer cabinets - $35 (52nd St. & Thomas)
http://phoenix.craigslist.org/evl/tls/4862050959.html

Steel powder-coated 4 drawer cabinets for tools or parts. Units are 24" wide, 22" deep, and 15" high. Perfect for shop, garage, or work van/trailer. The drawers are on full-extension, roller bearing guides, and are self closing. Drawers have label holders on the front. Some have plastic divider trays, some are open for tool storage. I have 2 units left, in very good condition. Asking $35 each firm.

 

[reddevildemo]

SNAP-ON KRA-270A WALL CABINETS
Set of 4 Snap-on wall cabinets for sale.
I will sell individually also.
Width = 33.75"
Height = 24.75"
Depth = 6"
http://greenbay.craigslist.org/tls/4854191823.html

 

[Catadj78]

This look like cabinets I bought last year on CL. They were originally in Home Depot. I wish I had room for two more.
----------------------------------

Tool or parts drawer cabinets - $35 (52nd St. & Thomas)
http://phoenix.craigslist.org/evl/tls/4862050959.html

Steel powder-coated 4 drawer cabinets for tools or parts. Units are 24" wide, 22" deep, and 15" high. Perfect for shop, garage, or work van/trailer. The drawers are on full-extension, roller bearing guides, and are self closing. Drawers have label holders on the front. Some have plastic divider trays, some are open for tool storage. I have 2 units left, in very good condition. Asking $35 each firm.

Great deal

 

[bczygan]

Stronghold Cabinets in Holly, MI

As used in Jacks 12 Gauge Garage.

I already have 2 workbench height cabinets, and no room for the bigger ones.

This seems to be a bunch of them at pretty reasonable prices.

http://detroit.craigslist.org/okl/tls/4862200235.html

 

[BJ42LX]

I don't know if this is a deal or not, but WOW. That is a press.

http://rochester.craigslist.org/tls/4863215971.html

 

[Gareth68]

somebody needs to buy this...


http://kansascity.craigslist.org/bfs/4855478521.html

Dayton 6" Bench Grinder - $85 (Kansas City, Kansas)

condition: good
make / manufacturer: Dayton



•safety tips
•prohibited items
•product recalls
•avoiding scams

Dayton 6" Bench Grinder with stand.

 

[riggs1117]

Cleveland Craigslist Dayton 8 inch grinder with stand $85
http://cleveland.craigslist.org/tls/4843433424.html

 

[ADSR]

Vancouver BC. Tennsmith 10' 16g sheet metal brake 3500.

http://vancouver.craigslist.ca/nvn/tls/4822785470.html

 

[CNGsaves]

PLEASE, some GJer go snag this WorkMate . . . local pickup only.
Wish I was next door to this one !!

Region: East USA

Location: Levittown, NY . . . . local pickup only

Item Description: Black & Decker WorkMate 550

Price: $ 25

Link:
http://www.ebay.com/itm/Black-and-D...722464090?pt=Clamps_Vises&hash=item3cefdfdf5a

 

[CNGsaves]

^ ^ ^ Very similar to above, I've found a steal at SearsOutlet.
I'd be snagging this one too if nearby as these are $80 normally.

Craftsman Professional Height Adjustable Clamping Table
Item # 65796

Dearborn, MI - - - - only $ 21.93

http://www.searsoutlet.com/d/invent...ype=&&zip=73118&itemSelection=all&invPage=yes

 

[Beaumont67]

Brand new Kirby G6 with hepa filtration.
- only plugged in 2x, didn't even have any hair on the power head bristles
- extra bags & accessories unused
- unit retailed for $1,350 back in year 2001
Lady paid $1, 200 for vacuum and gave it to her mother & now selling...was listed since Nov.
- senior lady thought it was to heavy and stored it in the basement
Local Kijiji, $250 purchase.

 

[bmxdad]

One of the best Vacuums you could buy at the time. More then worth it.

 

[balane]

For somebody living in the PNW area who has a need for a LOT of drawers this seems like an amazing deal to me. Maybe I'm off base on my assessment but still, these will offer an incredible amount of (thin) storage.

http://seattle.craigslist.org/sno/tls/4864578735.html

I have two large metal cabinets that are good for storing, sheets of materials, blueprints, maps, large format photos, and tools.

Please contact me if you are interested.

looking for 500 for both OBO

Chris

 

[larryq]

Old rolling craftsman tool chest for $50 in Brentwood CA:

http://sfbay.craigslist.org/eby/tls/4865076115.html

 

[jeffgbook]

Anybody else seeing a bunch of older expired posts/ads?