Show your new tool arrivals

[99blaze]

Snap on flank drive plus metric set and a new light

Sent from my SM-G920V using Tapatalk

 

[Pipe]

It's the real deal. [emoji481]

Nice. I've been considering the Chinese one but think I'll always be envious of the legit units

Sent from my 0PJA2 using Tapatalk

 

[davethorik]

Picked these up on ebay...Erem 632 NCF flush cutters, and a Starrett C606R 6" machinist scale.

The flush cutters were bought new in '08 and were used in a medical setting, have a little light oxidation but the cut edges are almost perfect.

The Starrett has light wear, but is practically new. One side is graduated in 1/50", the other in 1/10".

 

[one9gt]

It won't fit the 1/2 drive impact I belive the body's will be differnt. Honestly I bought the impact and had my cornwell dealer order one for the next week he saw me..didn't pay attention to part number sorry.

Sent from my SAMSUNG-SM-N900A using Tapatalk

49-12-0012

Call Milwaukee customer service to order

 

[one9gt]

Tyguy1209
Do you know if the boot on your 3/8 impact will fit the 2755 1/2? Do you have a model number for the boot?

49-12-0012

Call Milwaukee customer service to order

 

[MattVette89]

Is this a real one or a real china one?

.

I look at them on eBay all the time. I wish there was a better way to tell from pictures, but the fakes are so good.

 

[Dennis Leigh Henry]

Nice finds, I would've paid $18 for all that too. I almost never pass up used riffler files, I use that same deburring tool regularly, and that pistol grip keyhole saw is one of my favorites. Very comfortable to hold and I love how you can rotate the blade to whatever angle you need. A neat feature that I utilize quite often.

Jim Diesel, thanks.. just a bit over a buck a piece...

Jeremy V, its the first rifflers I have, have priced them new before and always walked away with sticker shock....

The Miller's Falls is an add to an existing keyhole from Stanley.. both perform much the same function. The MF version appears to be specific to drywall sawing ... its short stocky and sharp....

 

[02Xterra]

New tools from the GF for my birthday



Sent from my VS986 using Tapatalk

 

[LowCapacity]

All from Amazon: Lang tools exhaust hanger remover and thread file set, Tekton lug nut socket set, Viair 12v air compressor.










Sent from my iPhone using Tapatalk

 

[Xmoonstompx]

Sent from my LG-H901 using Tapatalk

 

[bgalakazam]

SK Tool 94549 - 3/8 set when I realized I didn't have any and was using 1/2 for everything...

 

[ADSR]

Wow! Congrats! That looks really nice!

 

[SC-AW11]

Made in USA Starrett that seem new


Sent from my iPhone using Tapatalk

 

[Jim Diesel]

Your GF has good taste in pliers.

 

[HolyGrail]

Sold my old Milwaukee brushed power tools that I had for 10 years, and upgraded to the newer Brushless Fuels. Back to project mode buiding.

 

[90zcar]

You need a toolbox man!!^^^^


Sent from my iPhone using Tapatalk

 

[MarkWilliams60]

You need a toolbox man!!^^^^


Sent from my iPhone using Tapatalk

Looks great to me. It's all right there in plain site to work with.

 

[KM223]

CL score! Both for $60

 

[neonlazer]

If I can recall, I have never seen GREY snap on hard handled screwdrivers before. Nice!

Apparently grey is Pozidrive.

 

[Strouty]

KM, you ****.

 

[Strouty]

I don't want to alarm anyone, this is a dedicated hammer for a truck and will not associate with my blue or green ones, it will not be allowed in the shop unless accompanied by the truck.

 

[neonlazer]

We are all still waiting for that grand family portrait, that one I guess can be cast out in shame for being red.

 

[Strouty]

I have decided the family reunion is not going to happen yet, it would take me a couple hours to get them all out and setup, then I have to put them away.

 

[KM223]

KM, you ****.

I only really wanted the Knipex and I have no real use for pozidriv but hey I like the color!

 

[ChrisFox]

Working on the grill, I realized I didn't have any flare nut wrenches. Got the HF socket organizers and realized I'm sorely lacking in the socket department. Getting 1/2 set next I think.

 

[thegroundpounder99]

I don't want to alarm anyone, this is a dedicated hammer for a truck and will not associate with my blue or green ones, it will not be allowed in the shop unless accompanied by the truck.

Ahhhh, the red handled step child. Shame shame

 

[HolyGrail]

You need a toolbox man!!^^^^


Sent from my iPhone using Tapatalk

Ha....I hate toolboxes man...Hate searching for everything. I use magnets in my peg board, for quick take off and put back on access.

 

[Strouty]

Magnets are great, the pegboard looks great, not for everyone, but I like it.

 

[Dennis Leigh Henry]

Made in USA Starrett that seem new


Sent from my iPhone using Tapatalk

Simply beautiful.....

 

[PelicanPines]

Some of you might know... I'm fixing my tractor... as a result... the wife has allowed me to purchase anything special I may need... at HER EXPENSE...

 

[MattVette89]

Presents in the mail today...

Almost new Snap On TL72 from a member on here:



A couple of vintage SK 1/4 ratchets, just need a cleaning:

 

[McFarmer]

Killing time before I picked the little one up from preschool, happened across a yard sale and said what the heck.

In amoungst the usual stuff I found this $5 beauty:

From what I hear in this place the little girl will never slip and will always be set at the right size when I pick it up.

Certainly not a farmer's tool, can't see anywhere that it has been used as a hammer.

 

[anndel]

Are these real or Chinese fakes? Send them to me and I'll check and get back to you.

 

[Dookie2122]

Picked up this set of snap-ring pliers today from Auto Zone, $16.99 plus tax. My first OEM product, made in Taiwan, very well made, much sturdier than other pliers I have owned.

 

[T_Roze]

Thanks. I figured I'd compare the price to the mayhew set. I don't have a specific preference, but those look pretty nice. I'd like to buy USA if the price is reasonable.

For what it's worth, I have taken a liking to using my angled short one for electrical connectors. Works well when you have to get under the tab.

 

[Fedwrench]

I have decided the family reunion is not going to happen yet, it would take me a couple hours to get them all out and setup, then I have to put them away.

Probably for the best. I mean the size of the picture might crash the Journal Trusty Cook might think they're giving their hammers away since you have so many, and then of course, hammer envy would follow from those members with a smaller group of hammers

 

[Strouty]

Probably for the best. I mean the size of the picture might crash the Journal Trusty Cook might think they're giving their hammers away since you have so many, and then of course, hammer envy would follow from those members with a smaller group of hammers

I did not say it won't happen, I just don't have enough square footage on my floor right now. I think I will have to stand on a ladder to get all of them in, still not sure if I will include the red one.

 

[Tyguy1209]

picked it up yesterday. Gave me a 1300 rebate, free euro, updated to latest 16.2. Paid off my cornwell tuck account, 300 towards a snapon truck account a thermometer a weeks worth of socks and 2 free classes in the summer for the solus edge.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[Tyguy1209]

figured they were both somewhat tools. Needed both for the shop.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[flame broiled]

CL score! Both for $60

Are these white?? and do you have a part number for the set?