To avoid these ads, REGISTER NOW!

Show your new tool arrivals

To avoid these ads, REGISTER NOW!
N

NoahG

Well-known member
Joined
Feb 24, 2013
Messages
1,055
Location
Detroit, MI
Figured I needed something from Armstrong before they're gone. 2af166b0510bb6e13bc0f186e3fb16aa.jpg


Sent from my iPhone using Tapatalk
 

Attachments

  • 2af166b0510bb6e13bc0f186e3fb16aa.jpg
    2af166b0510bb6e13bc0f186e3fb16aa.jpg
    389.7 KB · Views: 0
R

rshadd

Well-known member
Joined
Dec 29, 2009
Messages
1,598
Location
Doylestown, PA
Picked up this Rigid Auto Detailing Kit #VT2534 today.

Comes with a 10' 1-1/4" 2 Layer Hose, a Soft Bristle Dusting Brush, a Stiff Bristle Scrubbing Brush, an Extra Long and Thin Crevice Tool, a Claw Nozzle and 2 Adapters.

32313517076_cb14daf1dc_z.jpg


Should make vacuuming out the truck a little less of a chore.
 
W

woody6904

Well-known member
Joined
Jan 26, 2016
Messages
522
Location
NW Ohio
cf45b345c2efd201e88579a9b12343de.jpg

Was torn between red and yellow. Finally decided on yellow. DCK397HM2 combo kit with the free 3/8 impact.
 

Attachments

  • cf45b345c2efd201e88579a9b12343de.jpg
    cf45b345c2efd201e88579a9b12343de.jpg
    206.2 KB · Views: 1
Last edited:
D

d.mcfarland

Well-known member
Joined
Jun 18, 2012
Messages
6,572
Location
Western PA
someone else said:
That is a pretty set of pliers. How are they to use?
Click to expand...

They are good, but maybe not the best. Very comfortable and the cutters perform well. The machine work is fantastic. With that said the needle nose can't take any torsion (twisting). The Snap On are in my opinion the best needle nose available but the NWS handle is nicer.
 
L

L.Cheapo

Well-known member
Joined
Oct 23, 2014
Messages
5,932
F9421EE8-C8DA-4CB3-ACC0-B4ACD5425765_zpsb1827imw.jpg

Ice Cream Truck stopped by today. I ordered the soft face hammer and spring tools when they were on sale in the Xmas flyer. I needed a proper valve stem tool, and its hard to say no to an air hammer when the bit set is free! Protective boot on order. Please pass the tool polish.:evil:
 
Last edited:
J

JacksoNRolyaT

Active member
Joined
Feb 21, 2015
Messages
25
bfd2becfd6c05b9135267b2c5a899f61.jpg

This came today. CP7732C. Going to replace my CP7732 and IR 35MAX. Can't wait to try it out tomorrow.
 

Attachments

  • bfd2becfd6c05b9135267b2c5a899f61.jpg
    bfd2becfd6c05b9135267b2c5a899f61.jpg
    1 MB · Views: 2
S

someone else

Well-known member
Joined
Jan 19, 2012
Messages
64
Location
MA
oxycodone said:
I've only had them a couple hours, so I can't really say yet. They feel even better than they look, though.
Click to expand...

Duhhhhhhhh. I didn't think that through completely did I? Haha. Though if the handles feel that good, you've got my attention.

d.mcfarland said:
They are good, but maybe not the best. Very comfortable and the cutters perform well. The machine work is fantastic. With that said the needle nose can't take any torsion (twisting). The Snap On are in my opinion the best needle nose available but the NWS handle is nicer.
Click to expand...

I will have to check them out. I've got specialized pliers and such for my electronics work, but do need to upgrade the pliers in the box.
 
To avoid these ads, REGISTER NOW!
K

K-Dog

Well-known member
Joined
Mar 15, 2014
Messages
2,523
Location
Millersville Maryland
L.Cheapo said:
F9421EE8-C8DA-4CB3-ACC0-B4ACD5425765_zpsb1827imw.jpg

Ice Cream Truck stopped by today. I ordered the soft face hammer and spring tools when they were on sale in the Xmas flyer. I needed a proper valve stem tool, and its hard to say no to an air hammer when the bit set is free! Protective boot on order. Please pass the tool polish.:evil:
Click to expand...

I use the **** out of those hammer head bits.
 
O

OCD

Well-known member
Joined
Dec 30, 2014
Messages
1,316
Location
Edmonton, Ab. Canada
L.Cheapo said:
Ice Cream Truck stopped by today. I ordered the soft face hammer and spring tools when they were on sale in the Xmas flyer. I needed a proper valve stem tool, and its hard to say no to an air hammer when the bit set is free! Protective boot on order. Please pass the tool polish.:evil:
Click to expand...

That air hammer is a beast!!
 
P

PureLeaf

Well-known member
Joined
Jul 25, 2014
Messages
1,417
Because Ryan won't let user's control their own posts for editing, deleting, etc
 
Last edited:
L

L.Cheapo

Well-known member
Joined
Oct 23, 2014
Messages
5,932
OCD said:
That air hammer is a beast!!
Click to expand...

I hope so. The Craftsman one I have is just a noisemaker. Hits like a 4 year old. It was free and I still think I overpaid for it.

I've needed an air hammer with some power several times over the past year; this is the best deal I've seen on these.
 
O

OCD

Well-known member
Joined
Dec 30, 2014
Messages
1,316
Location
Edmonton, Ab. Canada
L.Cheapo said:
I hope so. The Craftsman one I have is just a noisemaker. Hits like a 4 year old. It was free and I still think I overpaid for it.

I've needed an air hammer with some power several times over the past year; this is the best deal I've seen on these.
Click to expand...

I got the same free bits when I bought mine!! I have added a sheet metal ripper, and it cuts like a hot knife thru butter... Louder though!!
 
T

T_Roze

Well-known member
Joined
Nov 5, 2013
Messages
481
Location
Edmonton Alberta
L.Cheapo said:
F9421EE8-C8DA-4CB3-ACC0-B4ACD5425765_zpsb1827imw.jpg


Ice Cream Truck stopped by today. I ordered the soft face hammer and spring tools when they were on sale in the Xmas flyer. I needed a proper valve stem tool, and its hard to say no to an air hammer when the bit set is free! Protective boot on order. Please pass the tool polish.:evil:
Click to expand...



Is this air hammer a flyer deal?

I just texted my driver, and he is saying it is only on sale ($50 off). $420.


Sent from my iPhone using Tapatalk
 
L

L.Cheapo

Well-known member
Joined
Oct 23, 2014
Messages
5,932
T_Roze said:
Is this air hammer a flyer deal?

I just texted my driver, and he is saying it is only on sale ($50 off). $420.


Sent from my iPhone using Tapatalk
Click to expand...

In the flyer it only says something to the effect of "Trade up to a good deal, ask your franchisee today!" Another poster, possibly a page or two back, mentioned he got the free bits with his. So I asked my driver what the air hammer deal was and he told me its regular price, but includes the 5 bits, which sell for over $200. List price on the gun is $425.
https://store.snapon.com/Super-Duty-Air-Hammer-Super-Duty-Air-Hammer-2-500-BPM--P885693.aspx

Oops, I see you're in Canada. I'm in the USA. Deals may be different. But you guys seem to get better prices than we do, when you factor in the exchange rate!
 
Last edited:
C

Carquest

Well-known member
Joined
Nov 29, 2016
Messages
519
Location
South Carolina
Ditto, mine was $425 with the free bits. My guy doesn't use flyers, that I've seen, he just puts all promo items on a service cart in his truck


Sent from my iPad using Tapatalk
 
T

toolmutt

Well-known member
Joined
Sep 5, 2009
Messages
2,020
Location
Texas
These are in the NAPA Real Deals flyer this quarter for 50% off.
 

Attachments

  • image.jpg
    image.jpg
    145.5 KB · Views: 323
L

L.Cheapo

Well-known member
Joined
Oct 23, 2014
Messages
5,932
5D21D11D-7708-40CE-9248-864A78364032_zps2tubnfwb.jpg

Some more goodies arrived today. Those Kant-Twist clamps are super nice. Not sure I'll ever use a C-clamp again, unless its the only thing that fits. Starrett makes some really, really nice tools. And before you guys get any ideas, the blue thing is a Lisle battery brush! :bounce:
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom