2017 Lowe's deals/sales/clearance thread

[openwheelracing88]

thanks, placed an order for $20. Hope it doesn't get canceled. Lowes around here like to cancel good deals.

 

[JohnKal]

Thank you!

 

[Sh40674]

99 bucks and unavailable at my store. Damn.

 

[spfrazierjr]

Here's a very hot deal. For the past 3 days Lowe's has been reducing the price of a dremel kit. Normally $99, now its as low as $4. I bought 7 for $5 each

About 50% of the lowes stores have not recent the price yet. To tell if your store is going to lower the price use this as a guide:

1) If the price just says a percentage, such as 25% off, then the price will reset lower in the past few days. Keep checking the price
2) If the price says "save 50% through 8/10/2017", then the price has already been reset lower


Dremel 32-Piece Variable Speed Multipurpose Rotary Tool Kit with Hard Case

**do not share this deal with other sites, it will die quick once word gets out. If you can find this for $20 or less near you i would buy it now**
Item # 786658 Model # 2290

Ordered the only one available near me. Still haven't gotten an order confirmation. Has anyone else had this issue? Normally I get them right after I place an order.

 

[Sh40674]

Will be traveling next week.. found a store in the state I'm going to, ill check sunday night and see if its still in stock and order it for in store pick up (they hold for 4 days).. ill be there wednesday... hooefully theu have it still on Sunday when I order... smoking deal.

 

[openwheelracing88]

I just ordered one for $20 with 10% off coupon. Just received ready to pickup email. Last one.

 

[mshell56118]

don't know if it was mentioned or not but i see the 11% deal is back up again.

where can i find the form?

 

[2002maniac]

Dremel kit is showing 79.98 at all stores within reasonable distance of me.

 

[jedilord0]

Wish some of the beefier dremels were for sale [emoji33]


Sent from my iPhone using Tapatalk

 

[JR4815D2]

Here's a very hot deal. For the past 3 days Lowe's has been reducing the price of a dremel kit. Normally $99, now its as low as $4. I bought 7 for $5 each

About 50% of the lowes stores have not recent the price yet. To tell if your store is going to lower the price use this as a guide:

1) If the price just says a percentage, such as 25% off, then the price will reset lower in the past few days. Keep checking the price
2) If the price says "save 50% through 8/10/2017", then the price has already been reset lower


Dremel 32-Piece Variable Speed Multipurpose Rotary Tool Kit with Hard Case

**do not share this deal with other sites, it will die quick once word gets out. If you can find this for $20 or less near you i would buy it now**
Item # 786658 Model # 2290

Not a bad deal, but not their best dremel tool. I own 3 of them with a much better motor, but for the price of $5 I would also get it. $7 around my way.

 

[ItsFriday]

FYI lowes site is sending out confirmation emails 2 hours late. The orders are going through. I just picked up the 7 I got for $5 .

 

[GM_tc]

Great buy only down to $24 here at one store, all other stores are still at $99. I ordered a few for me and some friends. Hope to pick them up tomorrow


Sent from my iPhone using Tapatalk

 

[Cruzan80]

Grabbed one at $10, even though the store said not available on the page. The check other stores said one and it let me check out. Will see.

 

[ItsFriday]

There is also a Dremel accessory kit normally $20 as low as $4 near me. Would go perfect with the Dremel.


Dremel 130-Piece Rotary Accessory Kit with Case
Item # 731381 Model # 730CS

 

[gumme]

Char-Broil Grilling Spatula Item # 608963 .40 cents, normally 4.99
https://www.lowes.com/pd/Char-Broil-Grilling-Spatulas/50330329

 

[floor61]

Anybody who got one of these for a low price interested in parting with one for a reasonable amount? My current Dremel is like 15 years old, and the chucks are all worn out so they won't hold bits tight enough.

 

[Sh40674]

where can i find the form?

Not sure.. don't see it on their site now

 

[Sh40674]

Anybody who got one of these for a low price interested in parting with one for a reasonable amount? My current Dremel is like 15 years old, and the chucks are all worn out so they won't hold bits tight enough.

Ditto... one of you guys that got one for around 10 bucks or so willing to part with one?

 

[proxenus]

Bought the "last in stock" online in 2 different stores,one for $18 and one for $10.. both cancelled

This is a useful way to see which stores nearby have it and their listed price:
https://brickseek.com/lowes-inventory-checker/
item # is 1000095842

 

[ItsFriday]

If the dremel isnt under $20 near you you can always ask a store to price match. Lowe's does price match other lowe's stores now. The lowe's in Clay, NY has a couple in stock for $4 each. You can have your local store price match that, or find a closer store. You could also see if Walmart or another retailer would price match.

 

[ItsFriday]

Bought the "last in stock" online in 2 different stores,one for $18 and one for $10.. both cancelled

This is a useful way to see which stores nearby have it and their listed price:
https://brickseek.com/lowes-inventory-checker/
item # is 1000095842

Some stores dont have a shelf space for this. About 6-9 months ago Lowe's started carrying this, which surprises me it's on clearance so quickly. You're better off just going to the store and looking for it. The Lowe's app might tell you what aisle it's supposed to be.

 

[timoboy]

080596041120 is the UPC of the 130 piece accessory kit if anyone needs it.

 

[JR4815D2]

Bought the "last in stock" online in 2 different stores,one for $18 and one for $10.. both cancelled

This is a useful way to see which stores nearby have it and their listed price:
https://brickseek.com/lowes-inventory-checker/
item # is 1000095842

When the deal is too good, you don't do online store pickup. You go to the store and find it. I had so many orders cancelled in the past, but I will place them while I am at the store. Employees will take them. I found a router for under $40, got the cancel msg as I followed the employee while carrying the merchandise in his hands.

 

[logan_gibson]

Lowes does not have to price match other lowes stores, even if your using lowes.com.
It's a store manager decision(I just tried to get them to price match a $15 one).
Called corporate to verify, they can refuse to price match any clearance item, other lowes store price, or online lowes price that isn't set to their store.

***** because all around me are 94-99$

 

[chrisexv6]

When the deal is too good, you don't do online store pickup. You go to the store and find it. I had so many orders cancelled in the past, but I will place them while I am at the store. Employees will take them. I found a router for under $40, got the cancel msg as I followed the employee while carrying the merchandise in his hands.

Its a **** shoot either way, really.

Most of the good Lowes deals I found were NOT labelled so on the shelf and they rang up at SHELF price instead of the web price.

I suppose I could argue to get them to price match their own website (which seems harder at most stores than getting them to price match ANYONE ELSE'S website), but Ive actually had more luck with just ordering for in store pickup.

 

[ItsFriday]

Lowes does not have to price match other lowes stores, even if your using lowes.com.
It's a store manager decision(I just tried to get them to price match a $15 one).
Called corporate to verify, they can refuse to price match any clearance item, other lowes store price, or online lowes price that isn't set to their store.

***** because all around me are 94-99$

Lowes price matches other stores. I got this straight from Lowes customer service. I have not had a problem price matching other lowes

Sometimes a competitor has a product purchased as a “Special Buy” that will be at a lower price than Lowe’s offers. We have a low price guarantee where we will price match our price or our competitors if a lower price is found within 30 days of purchase, but it does exclude “Special Buy” promotions.

Other exclusions include:
• Non-verifiable competitor prices
• Third-party marketplace sellers
• Competitor closeouts
• Discontinued, clearance, damaged products
• Refurbished and used products
• Tax-free events
• Lowe’s LMRP items (Lowe’s Minimum Retail Price or Unilateral Minimum Retail Price)
• Senior citizen discounts
• Rebates - Lowe’s will not match the rebate offer but at store management discretion Lowe's will match the final netted down price after rebate is applied)
• Coupons
• Competitor advertising/pricing errors
• Buy one, get one free offers - If a competitor offers a buy one/or multiple, get one free (ex., buy three bags of mulch, get one free), Lowe’s will match the per-unit price.
• Percent-off sales price offers - If a competitor offers a specific percent off an entire group, assortment, category, or the entire store, Lowe’s will match this offer at the customer’s request.
• Items previously purchased from Lowe’s (outside of the 30-day return period)

 

[ItsFriday]

Its a **** shoot either way, really.

Most of the good Lowes deals I found were NOT labelled so on the shelf and they rang up at SHELF price instead of the web price.

I suppose I could argue to get them to price match their own website (which seems harder at most stores than getting them to price match ANYONE ELSE'S website), but Ive actually had more luck with just ordering for in store pickup.

I can't recall a time where something rang up higher than the shelf price or online. I always take pictures of the price tag. If it rings up wrong I show the cashier and they've always 100% of the time adjusted the price for me.

 

[gamp945]

I struck out on the dremel deal, but I came across a great deal on Kreg jigs tonight.

The Kreg DIYKIT sold by Lowes is very cheap at some stores.
As low as ~$15 for 3 Kreg jigs/tools!
All made in USA.

This kit includes 3 different Kreg items:
1. Kreg R3 pocket hole jig - $40
2. Kreg 5mm shelf pin jig - $35
3. Kreg Rip-Cut - $30

The regular price for the kit ($80 - $90) is already less than the cost of the individual items (about $105). This was a steal for me at about $20. Feel free to brag about the price at your local store

 

[LoveOldIron]

I struck out on the dremel deal, but I came across a great deal on Kreg jigs tonight.

The Kreg DIYKIT sold by Lowes is very cheap at some stores.
As low as ~$15 for 3 Kreg jigs/tools!
All made in USA.

This kit includes 3 different Kreg items:
1. Kreg R3 pocket hole jig - $40
2. Kreg 5mm shelf pin jig - $35
3. Kreg Rip-Cut - $30

The regular price for the kit ($80 - $90) is already less than the cost of the individual items (about $105). This was a steal for me at about $20. Feel free to brag about the price at your local store

Got an item number for that. Search is coming up empty for me?

Sorry. Didn't realize that was a link. Showing no longer available on line. Thanks

 

[gumme]

Every item I have bought at Lowes has been consistent with the price for THAT store
on Lowes.com. The only inconsistent has been the shelf tags not being updated to the new price. Every item I bought this week in store did not have the actual price on the sticker. Which is good for me ,as the general public passing by has no idea the price is actually lower. I was able to get $2,800.00 worth of building material for $120.00 today. It was all marked down 90%. The shelf tag did not reflect that.

 

[jedilord0]

Every item I have bought at Lowes has been consistent with the price for THAT store
on Lowes.com. The only inconsistent has been the shelf tags not being updated to the new price. Every item I bought this week in store did not have the actual price on the sticker. Which is good for me ,as the general public passing by has no idea the price is actually lower. I was able to get $2,800.00 worth of building material for $120.00 today. It was all marked down 90%. The shelf tag did not reflect that.

What material bro? Share the deal


Sent from my iPhone using Tapatalk

 

[Sh40674]

Lowes price matches other stores. I got this straight from Lowes customer service. I have not had a problem price matching other lowes

Sometimes a competitor has a product purchased as a “Special Buy” that will be at a lower price than Lowe’s offers. We have a low price guarantee where we will price match our price or our competitors if a lower price is found within 30 days of purchase, but it does exclude “Special Buy” promotions.

Other exclusions include:
• Non-verifiable competitor prices
• Third-party marketplace sellers
• Competitor closeouts
• Discontinued, clearance, damaged products
• Refurbished and used products
• Tax-free events
• Lowe’s LMRP items (Lowe’s Minimum Retail Price or Unilateral Minimum Retail Price)
• Senior citizen discounts
• Rebates - Lowe’s will not match the rebate offer but at store management discretion Lowe's will match the final netted down price after rebate is applied)
• Coupons
• Competitor advertising/pricing errors
• Buy one, get one free offers - If a competitor offers a buy one/or multiple, get one free (ex., buy three bags of mulch, get one free), Lowe’s will match the per-unit price.
• Percent-off sales price offers - If a competitor offers a specific percent off an entire group, assortment, category, or the entire store, Lowe’s will match this offer at the customer’s request.
• Items previously purchased from Lowe’s (outside of the 30-day return period)

So with it being clearance.. Will Lowe's price match another Lowe's if it's a clearance item?

 

[logan_gibson]

So with it being clearance.. Will Lowe's price match another Lowe's if it's a clearance item?

According to my lowes and the customer service number I called, no that's the stores call.
I may try contacting them again tomorrow, but it was made clear that the store does not have to honor another (Lowes)store pricing. (This may be new because they price matched some clearance lights for me a month or two ago.)

 

[EOC_Jason]

Got an item number for that. Search is coming up empty for me?

Sorry. Didn't realize that was a link. Showing no longer available on line. Thanks

You can search on Brickseek for product # 50296251 and it will show if any inventory around. One store around me at $68....

 

[LoveOldIron]

You can search on Brickseek for product # 50296251 and it will show if any inventory around. One store around me at $68....

Tried 4 different areas of the country. All zeros. Thanks, though.

 

[ItsFriday]

The Kreg thing is very YMMV. Only a dozen stores have it under $30. None near me.

Franklin, NC 1 $14.00
Mt. Pocono, PA 1 $15.20
Sw Sarasota, FL 2 $21.60
S. Naples, FL 1 $22.40
Willoughby, OH 2 $22.40
Epping, NH 2 $25.60
E. Springfield, MA 2 $28.00
Galesburg, IL 1 $28.00
South Bend, IN 2 $28.00
Cromwell, CT 2 $28.00
Lake Wales, FL 1 $28.00
Brooksville, FL 1 $28.00

 

[cheechi]

hope this helps

 

[rtfosmoe]

I stopped by the store in South Bend, IN and purchased one for $28. There were two left. One had a damaged case. I also picked up the Dremel kit for $20.

Thanks,

Rich

 

[ItsFriday]

Lawnmower kit $3

 

[ItsFriday]

Worx extension pole $8. It's just the pole