Found a deal on craigslist? - List Here!

[Muttly]

Mid-MI

3-1/2" Craftsman vise $15

https://lansing.craigslist.org/tls/d/smaller-bench-vise/6619582668.html

 

[Muttly]

Mid-MI
Snap On service cart $175

Looks clean

https://lansing.craigslist.org/tls/d/snap-on-tool-cart/6643988427.html

 

[SRX]

Not familiar with this, but someone may be.

Tool cabinet
Blackstone Valley, MA
$80.00

https://worcester.craigslist.org/tls/d/tool-cabinet/6647824382.html

 

[bubinga]

Nice!

Not familiar with this, but someone may be.

Tool cabinet
Blackstone Valley, MA
$80.00

https://worcester.craigslist.org/tls/d/tool-cabinet/6647824382.html

Sent from my MotoG3 using Tapatalk

 

[larryq]

Interesting $50 storage cabinet in Stockton CA. Had a Vidmar / Stanley label on it, but not sure if that's just an add-on or if the real deal. Have a look, and get back to us when you pick it up:

https://stockton.craigslist.org/tls/d/heavy-steel-storage-cabinet/6648613367.html

 

[SRX]

larryq, that is a Vidmar. The open door pic shows the seams and the back corner mounts (internally). Someone could remove the doors and mount drawers in this if they had the proper widths. Awesome deal!

 

[bargainhuntingking]

In Northwest, WA: Craftsman 5 drawer toolbox with locking top tray, full of tools. $100

https://bellingham.craigslist.org/tls/d/tool-box-with-tools/6649733925.html

 

[bubinga]

Region: East

Location: Wheeling, Northern WV Craigslist/Tools (Steubenville Ohio)

Item: Jet 10" Table Saw Belt drive, Cast Iron deck.

Price: ..........................ONLY $40

Nice looking saw for someone starting out, or with out lots-0-room.
looks Older, Well made.

https://wheeling.craigslist.org/tls/d/10table-saw/6649686394.html

 

[AngryBeaver]

Nice USA 3.5" vise for sale in Placerville CA for $35. Jorgensen brand:

https://sacramento.craigslist.org/tls/d/bench-vise-usa-made/6642812015.html

good deal for someone. that sure looks like the little Athol that was a HD homeowners grade...

 

[compunaut]

1971 Craftsman Red/Gray Top Box and Roller Base
Northern Denver suburbs. Probably too pricey @ $150, but maybe he'll take less?

 

[JimNC]

1971 Craftsman Red/Gray Top Box and Roller Base
Northern Denver suburbs. Probably too pricey @ $150, but maybe he'll take less?

One of these just popped up in Charlotte as well, but he wants $250.

 

[bubinga]

1971 Craftsman Red/Gray Top Box and Roller Base
Northern Denver suburbs. Probably too pricey @ $150, but maybe he'll take less?

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Its In Nice shape though, esp the top.
I prefer drawers all the way to the bottom, But that's just me.
I'd probably go $150.00 if I needed (well Need" don't apply to us)
Or wanted it.

One of these just popped up in Charlotte as well, but he wants $250.

Now that's steep,
Did that one have the open "Bin" on the bottom too?

 

[wingnutthehutt]

Region: Nor Cal

Location: Roseville

FREE!

This person seems to be cleaning out a garage. There are THREE cordless drills in the free section.
https://sacramento.craigslist.org/zip/d/craftsman-cordless-drill/6650450177.html
https://sacramento.craigslist.org/zip/d/makita-drill/6650455559.html
https://sacramento.craigslist.org/zip/d/craftsman-cordless-drill/6650453162.html

 

[454ragtop]

Vise and a "workbench" $15. https://boston.craigslist.org/bmw/tls/d/workbench-and-vice/6652928593.html

 

[JimNC]

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Its In Nice shape though, esp the top.
I prefer drawers all the way to the bottom, But that's just me.
I'd probably go $150.00 if I needed (well Need" don't apply to us)
Or wanted it.


Now that's steep,
Did that one have the open "Bin" on the bottom too?

Yes it has the bin on the bottom. I’m traveling, may offer him 75 when I get back.

 

[bubinga]

Yes it has the bin on the bottom. I’m traveling, may offer him 75 when I get back.

Good Luck On The Offer!

 

[bubinga]

Eastern Craigslist
Altona Craigslist
Giant bans saw. $150.00
If I only had the room!

Big belt sander attached to it too.


https://altoona.craigslist.org/tls/6655416211.html


Sent from my MotoG3 using Tapatalk

 

[larryq]

Nice looking vintage Atlas drill press for $75 in Milpitas CA...with a slow-speed pulley. Someone in the east bay needs to get this, if it's not gone already:

https://sfbay.craigslist.org/sby/tls/d/atlas-drill-press/6655268278.html

 

[larryq]

Speaking of drill press deals, in Fremont CA there appear to be *two* powermatic units for sale for $100 each. 3 phase motors, but those can be changed out. Nice looking deal indeed:

https://sfbay.craigslist.org/eby/tls/d/drill-presses/6655118613.html

 

[larryq]

Do my eyes deceive me, or is this a Wilton 1750 tradesman vise for $60 in Petaluma CA? Just a bit far for me to travel (plus I have too many other vises in my garage) otherwise this seller would be getting a call from me-- obviously needs to be grabbed by a GJ member, stat:

https://sfbay.craigslist.org/nby/tls/d/large-vice-47-pounds/6653582836.html

 

[Shiftless]

Yeah, that’s a 1750 all right.
Too far for me especially since I already have one waiting in line for repaint.

 

[catalytic]

Speaking of drill press deals, in Fremont CA there appear to be *two* powermatic units for sale for $100 each. 3 phase motors, but those can be changed out. Nice looking deal indeed:

https://sfbay.craigslist.org/eby/tls/d/drill-presses/6655118613.html

The vises appear to be Wahlstrom drill vises with the quick release option -- the short versions. If they are in good shape then they are worth the asking price alone. Nice vises for a drill press.

 

[wmb67]

For anyone in the Boston area...
Looks like an architectural/map cabinet in that free pile.
https://boston.craigslist.org/nos/zip/d/scrap-metal/6656411463.html

 

[larryq]

Vintage 1/3 HP craftsman grinder (non block) for $100 in Chico CA. 3.8 amps, which isn't bad at all, includes eyeshields and I assume the stand:

https://chico.craigslist.org/tls/d/bench-grinder/6656192937.html

 

[larryq]

For anyone in the Boston area...
Looks like an architectural/map cabinet in that free pile.
https://boston.craigslist.org/nos/zip/d/scrap-metal/6656411463.html

Nice find. Most folks won't look past the first photo in the post and figure there's nothing worthwhile:

...that center file cabinet needs a little scrubbing and it'll be good as new!

 

[larryq]

It's grinder week at the GJ, here's a $45 vintage Cincinnati grinder (4.5 amp) in Sacramento CA that looks near identical to my vintage Black and Decker unit, which is a sturdy rock of a grinder. Cast iron, top to bottom:

https://sacramento.craigslist.org/tls/d/cincinnati-bench-grinder-6/6656008746.html

 

[larryq]

Walker Turner drill press & vise combo for $100 in Brentwood CA. Looks very nice, so go get it:

https://sfbay.craigslist.org/eby/tls/d/drill-press-and-vice-combo/6656277622.html

 

[larryq]

1/2 HP Block grinder with eyeshields and light, plus quench tray. $65 in Sebastopol CA.
"grinder is in very good working condition":

https://sfbay.craigslist.org/nby/tls/d/craftsman-1-2-hp-bench-grinder/6656483064.html

 

[larryq]

Big ol' Columbian vise for $60 in Rocklin, CA. Definitely close to if not at, the mythical $1/lb rule:

https://sacramento.craigslist.org/tls/d/large-vise/6656873661.html

 

[larryq]

Not a classic, but a 12 speed drill press with vise for $75 in San Jose CA:

https://sfbay.craigslist.org/sby/tls/d/drill-press-vice/6655481747.html

 

[larryq]

Looking a bit tired, but $30 for a Baldor grinder should perk up anyone's ears. This one's in Sacramento:

https://sacramento.craigslist.org/tls/d/bench-grinder-baldor-6/6652409692.html

 

[bubinga]

Nice looking vintage Atlas drill press for $75 in Milpitas CA...with a slow-speed pulley. Someone in the east bay needs to get this, if it's not gone already:

https://sfbay.craigslist.org/sby/tls/d/atlas-drill-press/6655268278.html

Sweet!

Sent from my MotoG3 using Tapatalk

 

[84scrambler]

Something tells me this might be a good price for something this big..

https://sfbay.craigslist.org/nby/tls/d/table-jig-saw-ja-richards/6657555766.html

 

[bubinga]

Region eastern
City Pittsburgh.
14" delta bandsaw$50.00
I'd go get it if I didn't have two already.
https://pittsburgh.craigslist.org/tls/6656806366.html



Sent from my MotoG3 using Tapatalk

 

[a52-830]

Selling items from four barns on one property. You can buy one item or all!
Goffstown, NH · about a day ago

https://www.facebook.com/marketplace/item/285812878892585

 

[larryq]

Region eastern
City Pittsburgh.
14" delta bandsaw$50.00
I'd go get it if I didn't have two already.
https://pittsburgh.craigslist.org/tls/6656806366.html



Sent from my MotoG3 using Tapatalk

Nice deal in PA!

 

[1Garageman]

This is in that deal in PA ^^^^, what is this device called, and used for??

 

[FishingMan]

It looks like a power hacksaw.

 

[bubinga]

Nice deal in PA!

For Sure..... Surprised it was still up

Sent from my MotoG3 using Tapatalk

 

[bubinga]

For Sure..... Surprised it was still up

Sent from my MotoG3 using Tapatalk

Is still up I should have said!
I'm A "sucker" for a deal,
And have an email [emoji391] into the seller,
I am going to go get it after all, if he will commit to Friday.
(won't have the $$$$ till then)
What the heck, like the commercial "there's always room for jello"
There is "is always room for another power tool" .......... L0L [emoji850]


Sent from my MotoG3 using Tapatalk