Found a deal on craigslist? - List Here!

[cdeer001]

24" Anvil - $125 (Warrenton, VA)

https://washingtondc.craigslist.org/nva/tls/d/anvil/6729048602.html

Old anvil that has been handed down in the family for years, may be from the depression era. Needs a good sand blasting, very heavy, 2 feet long

 

[bubinga]

24" Anvil - $125 (Warrenton, VA)

https://washingtondc.craigslist.org/nva/tls/d/anvil/6729048602.html

Old anvil that has been handed down in the family for years, may be from the depression era. Needs a good sand blasting, very heavy, 2 feet long

That's a good deal!
Even if you had to mill it down a little bit or Surface grind it!

Sent from my MotoG3 using Tapatalk

 

[bubinga]

The more I am looking at that lathe the more I am wanting it that would be sweet with a variable frequency drive on it I am thinking of getting into turning and trying to sell my items again and a production style set up with two lates would be nice if he still has it when I get my Social Security check I think I am going to call him and get it it's about an hour from here I'd say maybe a little further.

Pittsburgh Craigslist
OLIVER MODEL 51-D WOOD LATHE - $225 (Uniontown 15401)

3 phase need a VFD.
Looks good
Good price too.
https://pittsburgh.craigslist.org/tls/d/oliver-model-51-wood-lathe/6723932119.html

Sent from my MotoG3 using Tapatalk

Go get this one!

Someone who can handle three phase should get in there car/truck and jump on that, Thats a smoking price.
Word of caution, the motor is a direct drive and has no belt, you're stuck with a three phase motor but it's an excellent lathe with four speeds. Recently, one sold for $3K for a complete one. The hand cranked compound tool carriage is missing on this one but that's not a deal killer, especially for $225.

The ways look clean. It has a 1-1/8"-8 TPI spindle thread so be sure you can 1st find a face plate for it. You can buy adapters for these spindles at woodcraft for $20-30.

These are very heavy, around 600-800 lbs.

I have one of those it is heavy. I found a deal today in the South Bay I wish I had time to get to but not going to make it so here you go.

https://sfbay.craigslist.org/sby/tls/d/assorted-woodworking-tools/6728651934.html

The stack of boxes on the bench are all Lie Nielsen and priced extremely well if unused as the ad claims. The rest looks pretty good too

Sent from my MotoG3 using Tapatalk

 

[bubinga]

The more I am looking at that lathe the more I am wanting it that would be sweet with a variable frequency drive on it I am thinking of getting into turning and trying to sell my items again and a production style set up with two lates would be nice if he still has it when I get my Social Security check I think I am going to call him and get it it's about an hour from here I'd say maybe a little further.

Sent from my MotoG3 using Tapatalk

Are you saying that has a compound Carriage alignment for longitude and cross-feed like a pattern makers lathe or a metal lathe? That would be really sweet because like I said I wanted to get into production things and if I could get a carriage for it that would be nice it would be nice for roughing down blank stand for the little boxes I make I make a lot of them kind of plain Jane but they look nice they are generally straight and about the size of a coffee cup. I am in the sourcing materials phase of adapting one to my other lathe but if this one has a provision for it with a rack then I'd be further ahead of the game? I have a carriage off a atlas 10 or 12 inch lathe I'm not sure now and some Acme thread and pillow blocks you get the idea I have to make a compound of some sort though as the carriage was not complete that I sourced from eBay. But if that Oliver in Uniontown PA has a provision again with the rack and everything like I said I would be that much further ahead of the game to find an original equipment manufacturer all of her compound if that's what you were saying?
I would probably do a wiper motor conversion to hit like I did on my Logan Lathe for electric variable speed feed to the Oliver lathe hopefully my new one.

Sent from my MotoG3 using Tapatalk

 

[bubinga]

Go get this one!

Someone who can handle three phase should get in there car/truck and jump on that, Thats a smoking price.
Word of caution, the motor is a direct drive and has no belt, you're stuck with a three phase motor but it's an excellent lathe with four speeds. Recently, one sold for $3K for a complete one. The hand cranked compound tool carriage is missing on this one but that's not a deal killer, especially for $225.

The ways look clean. It has a 1-1/8"-8 TPI spindle thread so be sure you can 1st find a face plate for it. You can buy adapters for these spindles at woodcraft for $20-30.

These are very heavy, around 600-800 lbs.

Just Got Off The Phone with The Fellow.
I committed to It Sight U-Seen!!!!!

 

[macgee]

Just Got Off The Phone with The Fellow.
I committed to It Sight U-Seen!!!!!

Awesome. Let us know how it works out.

 

[bubinga]

Awesome. Let us know how it works out.

Thank You For The well Wishes!

 

[a52-830]

Automotive garage clean out Brockton, MA · about a minute ago

66 Corvette sting ray 32xxx miles
72 Chevy chevelle 97xxx miles
69 Chevy Nova 44xxx miles
61 Cadillac coupe deville
mid 70s c30 tow truck
mid 70s k10 custom plow truck
80s Buick regal
80s convertible Cadillac Seville

gang load of 60s 70s and 80s performance parts engine blocks heads and headers for small block and big block Chevy
2 - 4 speed transmissions
bell housings
hand tools
cars have been sitting for close to 30 years in a garage
I and not going to answer a thousand questions I dont have time to pick through it all
we will have a open showing on Saturday 9/27 from 9 to 5 if you are interested in the cars come check them out and put your offer in. I will update this post with a address on Friday morning as I dont need the trouble this week with people showing up early.

 

[a52-830]

Craftsman radial arm saw
Hudson, NH · 17 minutes ago ·

 

[SRX]

Free metal van storage

Franklin, MA

https://boston.craigslist.org/bmw/zip/d/old-van-guard-van-boxes/6732679143.html

 

[sgs236]

Region: East

Location: Pittsburgh

Item: LeBlond Lathe

Price: 800 dollars

Link: https://pittsburgh.craigslist.org/tls/d/lablond-lathe/6732332452.html

Not an expert on lathes, but 800 seems like a steal to me.

 

[bubinga]

Region: East

Location: Pittsburgh

Item: LeBlond Lathe

Price: 800 dollars

Link: https://pittsburgh.craigslist.org/tls/d/lablond-lathe/6732332452.html

Not an expert on lathes, but 800 seems like a steal to me.

Yes I saw that it's on Marketplace as well for 800. 00 yes it's a steal at that price. Too big for my garage or basement though or I'd be all over it while I don't have the money haha

Sent from my MotoG3 using Tapatalk

 

[JimNC]

Just Got Off The Phone with The Fellow.
I committed to It Sight U-Seen!!!!!

Super jealous! Be sure to ask him about missing parts. Don’t be in a hurry to get loaded and go. If he remembers where the compound is you’ll be happy to have spent an hour chatting.

I don’t believe that they all came with the compound, so it may not be missing, but worth a try.

 

[Bartleby]

Wilton 4" bullet at a garage sale in San Jose, CA.

No price listed so maybe worth passing by for those early birds.

Update: seller asking for $350. Not a good deal.

https://sfbay.craigslist.org/sby/gms/d/garage-sale-fri-sat/6732916965.html

Wilton 500S for $300 in San Jose, CA. A decent price for a 500 in the Bay, maybe.

It looks like the anvil has been beat and the jaw faces look worn. These are less common than 4" and 3" bullets around this area.

Update: SOLD

https://sfbay.craigslist.org/sby/pts/d/chevy-ford-moparhondacuda/6732516179.html

 

[bubinga]

Super jealous! Be sure to ask him about missing parts. Don’t be in a hurry to get loaded and go. If he remembers where the compound is you’ll be happy to have spent an hour chatting.

I don’t believe that they all came with the compound, so it may not be missing, but worth a try.

0K Thanks........

 

[a52-830]

Snap on tool box come get it
Waltham, MA · 7 minutes ago ·
$500
Upgraded to new tool
Condition
Used - Good


[appears to be a KR1000 in good (or better) condition.]

 

[macgee]

Starrett Athol 924 Vise w/swivel base- Made in America!!! - $100 (Torrance, CA)

Good price, this particular model & year is one of my most favorite vises ever, hard to find one in this good of condition with removable 4" jaws and with a swivel base, looks complete. Replacing broken screw shouldn't be too much hassle but needs to be done. Slide looks to be in excellent condition and handle is straight. For this one, It's a good price but he's asking $100 so probably offer $75-$80.

https://losangeles.craigslist.org/wst/tls/d/bench-vise-athol-924-made-in/6731703828.html

 

[Shiftless]

Great find Macgee
That one is in excellent shape with just a little broken screw problem. No biggie.

I was in Los Angeles yesterday morning but am home now.
I usually check C/L when I’m done there..for some reason I didn’t. Too bad for me.
Let that be a lesson to all of you good deal searchers...

 

[Indexmill]

New Snap On Puller tool board:

https://raleigh.craigslist.org/tls/d/brand-new-snap-on-puller-set/6733945788.html

 

[Toothaker]

Craftsman 5182 Vise. Made by Reed. $70

https://wichita.craigslist.org/tls/d/craftsmaninch-vise/6733649616.html

I've got too much going on or I'd go get it myself.

 

[oak_park]

Chicago....$20.00. Act fast! Reed 203 1/2
https://chicago.craigslist.org/nwc/tls/d/vice/6736766145.html

 

[larryq]

Chicago....$20.00. Act fast! Reed 203 1/2
https://chicago.craigslist.org/nwc/tls/d/vice/6736766145.html

I have that same vise, paid $40 for it, which was a steal. Sturdy little rock of a vise.

$20 is _twice_ the bargain, go get it someone!

 

[Bartleby]

Chicago....$20.00. Act fast! Reed 203 1/2
https://chicago.craigslist.org/nwc/tls/d/vice/6736766145.html

I have that same vise, paid $40 for it, which was a steal. Sturdy little rock of a vise.

$20 is _twice_ the bargain, go get it someone!

Price just went up 10X. It's listed at $200 now.

 

[protegeV]

Price just went up 10X. It's listed at $200 now.

Probably got 75 emails and realized the error. Although $20 was a good deal, $200 is too much.

 

[Bartleby]

Probably got 75 emails and realized the error. Although $20 was a good deal, $200 is too much.

Price now at $298.

 

[protegeV]

Price now at $298.

He's either ******** trolling or lacks understanding of "or best offer" and increasing the asking price every time he gets a better offer.

 

[Carpkid805]

no hes trolling, already sent him a message and he got salty and pist when i told him oh dont worry theres a thread about you selling it for a good deal for both parties now trying to be an ******* and get greedy

 

[Shiftless]

Clearly overpriced now at $298
I bought a Reed 3C, a better vise, in better shape for that price.

 

[torqueman2002]

Probably got 75 emails and realized the error. Although $20 was a good deal, $200 is too much.

Make that 75 + 1.

 

[Bartleby]

Clearly overpriced now at $298
I bought a Reed 3C, a better vise, in better shape for that price.

Was it the 3C that was listed in the Bay Area a couple of weeks ago?

I was thinking about getting it but decided to wait for one that has removable jaws.

 

[Shiftless]

Was it the 3C that was listed in the Bay Area a couple of weeks ago?

I was thinking about getting it but decided to wait for one that has removable jaws.

No, I picked mine up from a C/L listing in July. Mine does have the forged in place jaws.
The C series Reeds are incredible vises and usually worth every penny you have to pay to get one.

 

[bubinga]

Eastern Craigslist https://altoona.craigslist.org/
Old Wet wheel Stone grinder, Motor driven, $25.00

Altoona Pa.
Tools! Router, Bandsaw, Vintage belt drive grinder, - $25<small> (Altoona)
All decent except the Bandsaw, Bandsaw OK too for craft work...........

https://altoona.craigslist.org/tls/6737756359.html

</small><small>

</small>

 

[bubinga]

Was it the 3C that was listed in the Bay Area a couple of weeks ago?

I was thinking about getting it but decided to wait for one that has removable jaws.

No, I picked mine up from a C/L listing in July. Mine does have the forged in place jaws.
The C series Reeds are incredible vises and usually worth every penny you have to pay to get one.

 

[bubinga]

no hes trolling, already sent him a message and he got salty and pist when i told him oh dont worry theres a thread about you selling it for a good deal for both parties now trying to be an ******* and get greedy

Too Funny!!

 

[Shiftless]

Ok
Here are a couple of pics of my 3C in its as found condition. It’s a big boy...weighs in around 120 pounds.
.
.

 

[Bartleby]

No, I picked mine up from a C/L listing in July. Mine does have the forged in place jaws.

I think that's what I meant in a roundabout way.

If it's not, then it's a coincidence. That CL ad began at $400, but then the seller dropped the price to $300. It was removed shortly after.

Anyway, great looking 3C.

 

[Shiftless]

That’s the same vise. He removed the ad because he sold it to me for $300

 

[bubinga]

Awesome. Let us know how it works out.

Yeah it worked out I talked to him last night I said I was getting my check today and I'd be on for it here I see the Craigslist ad Down! I called him up I said hey did you sell that lathe, 0r did you Takei it down for me he says yeah I sold it I said okay, I will make sure not to buy nothing from you in the future as many times as I called you and told you I was coming out tomorrow I'll tell you what pal in the future he has stuff for sale all the time I told him thanks for letting me know too..... what a jag off maybe I should not have posted it here maybe someone from here gone it if someone from here got it let me know that's okay I'm just pissed at him. I even asked him if I could the parts and I'll PayPal and he wouldn't do it that's okay he lost a future customer I guarantee you I won't buy nothing off him he he can't post I've rebuilt $50 unisaw and I will not buy it from him

Sent from my MotoG3 using Tapatalk

 

[a52-830]

Snap on tool chest Monson, MA · 26 minutes ago

 

[gas man]

just bought OTC (8031) complete in perfect shape $100 Louisville ky craig list feel like I got a great deal.