Show your new tool arrivals

[Qualitytools]

Those are SAE.

Thanks

 

[Bigblockyeti]

I broke my old vacuum pump a while ago and my uncle just gave me another, he's still sitting on a mountain of old industrial equipment from decommissioning a few capacitor manufacturing plants that I'm hoping to barter for. This is NOS and was sitting on a shelf for quite a while just in case.

 

[doorfx]

MS241c with m-tronic carb. This is a hell of a saw.

 

[ptgarcia]

I needed a new drop hitch so I picked up this Curt and a new 2” ball, so I needed this stuff to tighten the 1-7/8” nut. Nothing fancy, but they’ll get the job done.




Paul

 

[sweet victory]

2000 Lumen Snap On underhood light. Got to put it to use immediately! Love the stout connector for the charging cable. I guess they're putting stickers over the lens to keep techs from blinding each other on the truck? lol

 

[bsaint]

Misc snap on stuff. Mostly needed the hammer for a wheel bearing job. The others are a medium 3 jaw oil filter wrench and small brake pad splitter.




Sent from my iPhone using Tapatalk

 

[bsaint]

Hazet extra long wrench set




Sent from my iPhone using Tapatalk

 

[Mike.ASC]

What are the wrench's in the left lower corner? ^

 

[bsaint]

What are the wrench's in the left lower corner? ^

Just sk wrenches but the iphone wide angle lens really makes them look weird.


Sent from my iPhone using Tapatalk

 

[Mike.ASC]

Just sk wrenches but the iphone wide angle lens really makes them look weird.


Sent from my iPhone using Tapatalk

Thanks for the reply, I was starting to wonder if I needed a better pair of reading glasses....

 

[bsaint]

Thanks for the reply, I was starting to wonder if I needed a better pair of reading glasses....

Lol. I was like wth myself.


Sent from my iPhone using Tapatalk

 

[BlakeTheCarGuy]

NOS USA pliers at Ollies for $5.99 can’t beat that they also had tons of USA screwdrivers that I got too just don’t have a picture of them I got these yesterday after work I can’t wait to use them I love Craftsman USA stuff. We will see how these compare to the Channellock brand USA ones I’m sure they will be about the same.


Sent from my iPhone using Garage Journal

 

[speed88]

A few new *toys* I mean tools I have recently picked up.

Fluke 117 and probe master leads and accessories.

Wera nut drivers

Bondhus ball end and torx T handle drivers.

 

[wkndwarrior29]

My first bahco set! Pricey but these torx inserts will come in handy while working on my bmw's and the obstruction wrench will serve in place of a set. Very impressed with the quality, I will definitely order more bahco.

Sent from my Pixel 3a XL using Tapatalk

 

[javyLSU]

Few things off the Snap-On truck...
Radiator fin straightener ACT407
Green tire valve tool TR107AG
Blue Point pedal jack B240B

 

[ThePostman]

After much deliberation, I finally decided on this 3/8" stubby.

 

[designer485]

Motive Power Bleeder for my BBK install.

Another Wera Kraftform Comfort because I can't pass them up when they are less than $4 each. This time a 3.5mm slotted x 125mm long.

 

[LucienShao]

my new OEM works of lineman ratchets.

 

[ZRX61]

Two items arrived today. The first to improve the look of things. The second to possibly destroy them...


https://www.amazon.com/gp/product/B07JDK4CS7/?tag=atomicindus08-20



https://www.amazon.com/dp/0760357781/?tag=atomicindus08-20

 

[IMStuner]

Recent SK purchase




Sent from my iPhone using Garage Journal

 

[BlueBomb]

Some Snap On goodies over the week. Speeder ratchet set from Ebay and rest from Facebook.

Sent from my SM-N960U using Tapatalk

 

[vibblueser]

Recent SK purchase




Sent from my iPhone using Garage Journal

Would you mind taking some closer pictures of the needlenose? May purchase them but cant find any decent pictures online. Thanks in advance.

 

[noid]

Recent SK purchase




Sent from my iPhone using Garage Journal

Whats the right tool? A mini prybar and...?

 

[48548]

Would you mind taking some closer pictures of the needlenose? May purchase them but cant find any decent pictures online. Thanks in advance.

I have the 3 pack of the sk long reach if you need some pictures.

Sent from my SM-N975U using Tapatalk

 

[48548]

Whats the right tool? A mini prybar and...?

A tool for plastic clips.... the ones with the insert in the middle you pop up.....

Sent from my SM-N975U using Tapatalk

 

[Smokeshow69]

A tool for plastic clips.... the ones with the insert in the middle you pop up.....

Sent from my SM-N975U using Tapatalk

This tool and the long needle nose are currently available on the sk tools steals and deals tab!


Sent from my iPhone using The Garage Journal mobile app

 

[48548]

This tool and the long needle nose are currently available on the sk tools steals and deals tab!


Sent from my iPhone using The Garage Journal mobile app

Thanks..... my current set...

 

[isb cornbinder]

I have needed a set of hose pliers for years. Earlier this week, I decided to buy a set and checked Craigslist first. There was a three pliers set for sale for $54.. I did my due-diligence and checked AMAZON. Amazon offered the same set for the same money, so I placed my order. Amazon dropped them off on my porch in under 48 hours.
I need these "ring" pliers to help remove the sparkplug leads on the right bank of the Flathead V8. The sparkplug leads are slightly under the Eaton M90 Supercharger.

 

[Semi-hole mechanic]

Isb, I bought the cheap HF set this spring to pull spark plug wires off my '93 f150s 302 that had the original plugs in it. Some of the boots were really tight and I couldn't get a good grip on them because of the exhaust manifold. Pliers made it much easier.

 

[CGarage]

Like new Fluke 112.
American made. The last of the US made generation.
Could not say no for $60.
Will be using it alongside my 87 III.

Facom tap/drill chart, made for me by an Etsy vendor.

 

[jonshonda]

Recent SK purchase

I have had some of those tools in my basket for a while, just don't see much feedback from others on them. But I think I will pull the trigger, as they have been around for a while and I "assume" they are quality tools.

 

[vibblueser]

Thanks..... my current set...

Appreciate the pics but was really looking for more up close pics of the one that the op purchased.

 

[jeffmoss26]

Does this count? Bought my dad’s 2016 Forester. He traded my 2012 towards a 2020.

 

[48548]

Appreciate the pics but was really looking for more up close pics of the one that the op purchased.

Sorry... my bad.

Sent from my SM-N975U using Tapatalk

 

[jeffmoss26]

A tool for plastic clips.... the ones with the insert in the middle you pop up.....

Sent from my SM-N975U using Tapatalk

I was wondering what that was for when I saw it on SK’s site!

 

[Samuel D]

I recently bought five Toptul AEEC-series double-ended swivel-socket spanners, or whatever you call these, to make a little set:



As with other Toptul stuff I have, they don’t seem to be quite as good as the very best of their type, but I’m pleased for the price.

 

[BlueBomb]

Appreciate the pics but was really looking for more up close pics of the one that the op purchased.

Here's pics of mine if that helps.

Sent from my SM-N960U using Tapatalk

 

[OCD]

I have 280 holes to drill in 1/4" plate, so I picked up a floor mount drill press... Nothing fancy, but miles ahead of my old bench top!!

I did get some made in USA Norseman SPHS bits for the project!!

 

[M635_Guy]

Old tool, new to me - saw one of these here not too long ago, and the utility of the 1/4" in the handle is exactly what I've wished for in the past. Grabbed one on eBay. I've considered getting the 3/8" version, but it's harder to find and it seems like the (usually automotive) situations I've wanted/needed it were all in 1/4" applications. But nice to know it exists

 

[Smokeshow69]

Old tool, new to me - saw one of these here not too long ago, and the utility of the 1/4" in the handle is exactly what I've wished for in the past. Grabbed one on eBay. I've considered getting the 3/8" version, but it's harder to find and it seems like the (usually automotive) situations I've wanted/needed it were all in 1/4" applications. But nice to know it exists

I have the craftsman and plomb version of those spinners and like them very much!


Sent from my iPhone using The Garage Journal mobile app