Recent content by 55chevrolet

hi, asking this for a friend that's doing a 2000 square foot shop he has tamped sand and gravel waiting for weather to warm a little.He asks if a person forgot the cement and say layed heavy rubber ,like horse stall down ,then put swisstrack or your race deck down ,would it make a shop floor as...

yes this is a 432 looks to have great compresson,now to finish shop ,and put it to work.

well explained ,thanks not sure which model it is must be a number somewhere.are they good compressors ,do know much about them.will check for you

there is what i call a fuse , think called 35 .it fits in on left side gets bolted on with the two shinny screws can see it in picture above .can take another if you want .and behind is what i call magnetic starter ,hope the word is right .seems to be spring loaded somehow ,if things fail this...

thanks for all your help .hook-up and start-up works great .awesome sight ,couldnt have done it without you. install black pipe lines next .thanks again daryl

thanks for all your help .runs fine .only one question left .when i bolted in motor fuse in starter box i moved the smell metal strap pointing at me up wards .seemed to work .compressor works great .hope its in proper position .thank again Daryl

hi,jim daryl from meadow here .just checkin in

will get better pics of motor wires ,looks to be four coming out of cover ,will i use all of these,thanks for help

starter came from princess auto .guess like tractor supply .glad you told me about element .looks to need a 40 ,will get one

ok want to thank you for all your help ,daryl

pics of heater cover

under heading of 1 thermal unit 18.1-20.8 flc is max fuse of 40 amps ,and for 20.9 -23.1 flc use a max fuse of 45 amps . there is a table with all 3 thermal units is that table for 3-phase,and 1 thermal for single phase ,thanks for help

guiys which way should you hook -up motor cw or counter clock-wise .and what size element would i buy for the starter ,thanks

i will get some armour cable from starter to motor tomorrow .12 guage ok ,also do i just need 2 hot wires and1 ground for armour cable

i have some more pics hope this is any help thanks ,daryl