Recent content by andris

Also, if you click my username and view all my posts, you will find a couple detailing the install. Andris

I'm one of the customers Fred is referring to. I have a working race shop in a rented building and had basically the same requirements as the original poster. I did the install myself and only did a primer coat and a coat of white - no clear topcoat, no cracks filled, etc. For me, this was...

Dan, The Bond-Tite goes on just like the Liquitile - pour it out and roll/spread with a squeegee. It is thinner than the liquitile and goes on at about 5 mils thick. Liquitile goes on at 10+ mils. The bond tite is very glossy wet or dry. In the pictures, it is dry to the touch when I...

Hello All, I've been lurking here for a long time, and I recently completed (well, 75%) my flooring project. My desires for the floor were quite different than most people here who are doing these showplace home garages. I rent a 1700 sq ft. warehouse that I operate a race car shop out of, so...

Hi Mike, I doubt there will be any compatibility issues with doing what you describe, as long as the first coat is cured properly. (though I'm not an expert) However, I did a lot of research in an effort to reduce the cost of my project, as I operate a race car shop in a rented warehouse, so...