Recent content by bhoth

I just bought another one of the HF 93274 used. Same ABAC pump, guy says it's 3 years old. May need a new pressure switch, and I got it for $50

Hi Yes I found one with the ABAC compressor pump made in Italy.

I just picked up the HF 93274. What are you all connecting to hard pipe on the wall with. I see the recommendation is some kind of flex line. Can someone post a link to a flex line on Amazon or other that folks are using? Thank you

I bought the Dannmar D10/CX to primarily lift my 2012 Ram 3500 Mega cab. It was the least expensive lift that was certified at the time that I bought it. My neighbor also has the same lift (for 3 years) and it works great for him. So that helped in my decision as well. Here it is holding my rzr...

This is what I ended up doing. I tested it with water an it holds 10 PSI no problem. I also like how I can vary the flow. I don't need to open this valve all the way.

I am leaning towards this option. I think two of these with a ball valve will work: https://www.amazon.com/dp/B000LNMQTO/?tag=atomicindus08-20

I am assuming they are metric threads but no idea of the size, no a 45 deg elbow will not have enough room to spin on.

I am thinking of cutting off the square piece and then cut threads in the tank and basically copy what the top picture has. Any other ideas?

Even if I weld a steel union on, I still can't spin on a 1/2 inch ball valve as there is not enough clearance.

Hi All, So I ordered a 20 gallon oil drain tank now that I have a 2 post lift. I picked out the one I liked online but I would like to add a valvle coming out of the tank like this one: But mine looks like this. The problem is the threads are metric and even if I could find a 1/2 inch ball...

I have a 22 wide by 28 long and while I wanted bigger, I was paying cash as I went along, took me about 1 year to build it. Sure I sometimes wish it was bigger but I just recently added a 2 Post Dannmar lift and I still have room enough. I always tell people build what you can afford.

Got my Dannmar D-10/CX assembled and started playing with it yesterday. It lifted my 2012 Ram 3500 Megacab 6.7L CTD very nicely! Shown here lifting one of the toys for a tire rotation.

Agreed, I can't see any of the pictures and I am in the middle of installing a Dannmar D10/CX myself.

I just bought the Dannmar based on my neighbor owning one for the last 3 years and he loves it. He bought the ACX but wished he would have bought the CX so that is what I got. Not fully assembled yet so I can't comment for myself but hopefully the next couple days.