Recent content by BillBob

  1. B

    Propane Line Test

    Well been checking that gauge every day and it has not dropped at all !! :) called the propane company to come out and fill it up dam that over $1000. to fill it up I asked if they would fill the tank and check for leaks as all the lines are exposed and they said they would, hopefully this...
  2. B

    Propane Line Test

    Well an Update Sense I replaced that stainless steel flex yellow coated tubing with the soft copper tubing my PSI at 14psi has not dropped at all it went down to 13 psi when it got colder then went back up to 14psi during the day. So my very slow leak was in the pipe or it's fittings? but I go...
  3. B

    Propane Line Test

    Update Ok got done switching the flex tubing over to 3/8 soft copper pipe. this was kind of a joke for me as I was at home depot there was no one to help figure what I wanted to do. After asking three employee's there and a Half hour I found the soft copper pipe, then off to the fittings. I got...
  4. B

    Propane Line Test

    Thanks Guy's I asked at Home Depot and at ACE Hardware about a connection pipe that would not break if an earthquake hit and I was told by both places this would be ok as it was rated for both natural gas and propane. So I went and got some 3/8 in dia copper tubing and the fittings and nuts to...
  5. B

    Propane Line Test

    Thank You all for your help and ADVICE :) this is the underground pipe kit I got from home depot https://www.homedepot.com/p/HOME-FLEX-Underground-1in-IPS-New-Install-Kit-1-1in-x-100-ft-Pipe-2-1in-Couplers-2-1in-Meter-Risers-Gas-Line-Detection-18-429440-010/309182809 this I was told by the...
  6. B

    Propane Line Test

    Yes Thanks for the Advice the first week I tested in September it was in the 80's then dropped to high 60's to 70deg this I kind of took as temp swing. Now we are in the 50's to 60's in temp I will pump it back up and see if it does the same thing if it does and still no bubbles in the test do...
  7. B

    Propane Line Test

    Hello Everyone I am setting up a home backup generator system, I got a propane tank and had all the valves replaced and ready to go I Hope. I did the rest of the line install myself. I got 1 inch Home-Flex kit and used black iron fittings and propane copper flex pipe for earthquake Proof? I...
Top Bottom