BurtEggley's latest activity
-
BBurtEggley replied to the thread Anybody know what kind of lock this is?.you can get bedroom sets that match the rest of the house, or come close, and have it keyed differently. Just don't lose the key or have...
-
BBurtEggley replied to the thread Shed paint.Sherwin Williams is a great paint, and what I use and would use. Usually their techs will steer you to the right paint based on your...
-
BBurtEggley replied to the thread Attic temperatures.I was thinking about this compared to what we did here. About five years ago we decided to upgrade the insulation. This house was...
-
BBurtEggley replied to the thread Question about Converting R22 to R32.I am puzzled. 1) if the unit is worn out after 26 years, how will just changing refrigerant help matters? 2) If the whole system is...
-
BBurtEggley replied to the thread Insulation heat-loss improvement, system sizing.3 ton with R60 insulation. Make sure you do the math well on the replacement unit. Electric prices have not caught up yet to oil, but...
-
BBurtEggley replied to the thread Attic temperatures.There is no reason someone has to have a hot attic if they plan good venting and roof tiles. Go up there early in the morning while it...
-
BBurtEggley replied to the thread Makita sander.I have used air on it to clean it already. Didn't help. I went ahead and bought a hose set from Amazon that was recommended by member...
-
BBurtEggley replied to the thread Makita sander.thank you. I'll take a look at that hose. Already have filter bags and sometimes use a cyclone with it for the glass bead cabinet. As...
-
BBurtEggley replied to the thread I think my garage door is sticking to the seal.is the floor painted? the sun heats the concrete and the bottom seal will stick to the painted surface. Putting silicone down might stop...
-
BA couple years ago I bought a Makita palm sander. It came with its own bag. When I used it to sand some areas of paint, it did fine...
-
-
BBurtEggley replied to the thread Remote temperature and humidity sensors feeding back to central thermostat.have an ecobee system like that. It has been very consistent. It only averages the rooms it feels activity in.
-
BBurtEggley replied to the thread Light bulbs for attics.if your attic gets to 150F, you mighty consider better designed venting. Even on a 110F day here this attic over a one story only gets...
-
BBurtEggley replied to the thread 240 V electrical.Mike - you have probably already figured it out. When the single phase lines come into the house, the two alternating current legs are...
-
BBurtEggley replied to the thread Draining compressor oil.how often do you change the oil? I think in the 30 years I have owned two of those pumps, I've changed the oil maybe twice, and it is...
-
BBurtEggley replied to the thread My home's central A/C system is driving me nuts.let us know how it goes.
