Recent content by chadrebuck

Thanks for the input. I took a look at the collet nut and the 3 collets that came with the machine, including the collet in the picture. I can't actually make out any taper. The picture does appear to show a taper but I can't see any taper when looking at the nut or collets directly...

I finally got around to making a collet for the machine using my mini lathe. To cut the slits I used the jig borer with a slitting saw. This is the first collet I've made. I still may sand, polish, and harden it if I can find an easy way to do so. To remove the collets I grab on to the end...

I am in the process of making a collet. I haven't taken the spindle apart so I can't help with any info. I did take the tables off and cleaned all rust and stuff possible. Added some shims so the gibs could be properly adjusted. The collet will be the first thing I've really made on my lathe...

I just picked up one of these machines this past weekend. It has a collet for for 1/2" bits and a small one that may be 1/8" but I think I'd like one for 3/8" bits. What collets are a fit for this machine? I suppose I could try to make a collet just to see how it turns out but I'm new to the...