Recent content by cidermill

  1. C

    belt size? valve grinder

    sorry Beam Equip.
  2. C

    belt size? valve grinder

    be. good luck!am equipment, meyersdale,pa 301-842-7095 they have belts stones and manuals in stock you just need the model number good luck!
  3. C

    Help on building a 15'x28' garage/shop

    This sound so familiar! My deal with the wife was 15x24 was for her car & 15x30 was for me. Windows: Awning type up high on wall where they don't interfear with usable wallspace. Also transome windows above doors. Radiant heat in floor pitched floor. Min. 8x8 overhead door. I put up a timber...
  4. C

    New garage..heating questions

    go radiant. pex is cheap , insulate the slab, if you dont have the time or money for the unit you can do it later. good luck
  5. C

    What is THE best degreaser?

    Grez-off hand spray works great!
  6. C

    Generator (ethenol) gasoline storage.

    premium gas has less ethenol and will last longer. Also stay away from discount stations they sometimes have higher percentage of ethanol.
  7. C

    Compressor Air routing question

    I ran synflex plastic truck air brake line underground then tied it into steel pipe. Just make sure you have a drain leg.
  8. C

    Suggestions for small, secure window fan?

    any type fan (decent size) to create air movement will help. you dont need to put it in a window. I have a 20X50 dirt floor basement that was always damp. A box fan at one end 2ft off the ground on low speed fixed my problem! You just need air movement.
  9. C

    Help building my dream

    Hi Dave, be sure to check with your local building department to see if there are any heighth or square foot restrictions. also get an idea of what the taxes will be. that size might be taxed as commercial. remember you live in NY land of taxs!
  10. C

    YAY...My midrise lift is in

    hooray!!!!! long time coming, Now I can have you do a tire rotation on the "t" when We come out!
  11. C

    Help! Air Hose Reel

    I have (2) 25' northern reels no problems for more than 3 Yrs
  12. C

    Expanded or extruded

    check with you concrete guy. They will tell you what psi rating to get for under the floor. Vertical foam(foundation) does not matter.
  13. C

    Sharpening lawn mower blades?

    8 inch course wheel witha good tool rest, blunt grind (90) first to get out nicks, then set angle and slide back and forth on the rest untill sharp, equal strokes both side. if the back of blade (lift) is worn thin throw them out!~
  14. C

    The Cidermill

    Thse front barn doors are 11' tall and about 500 pounds each.
  15. C

    Historic Lemp Brewery shop space

    we know poor . don.t we
Top Bottom