Recent content by CosmosMpower

What are some alternatives to epoxy if I need the floor to be resistant to oil spills for working on the car etc?

How much work is it to remove all the coating? I looked into Racedeck but it was expensive and I like to work on my car in the garage so spilled oil still soaks through and stains the concrete.

No it's not where the tires are (hot tire pickup) they are random spots. I acid etched the concrete and cleaned the hell out of it and let it dry. I did not detect any moisture, I installed it in summer in TX when it was 90F, it's really dry that time of year. Everything evaporates nearly...

I put down the basic grey Epoxy coat kit before I moved into my house in July 2010. The house was built in 2007 but never sold/lived in until I bought it in May 2010. I did the proper etching, prep and laid the floor down. It looked great for about a year when some spots started to come up...

There are no bubbles in the floor, I think it just looks that way. It's more like an edge starts to lift and then anything that catches it pulls up another small piece and then it makes a hole. The epoxy laid down completely flat and never had any bubbles. The spots where it wore through...

Concrete was fresh. I did the acid etch and prep according to the instructions in the kit. I made sure the concrete was completely dry and the humidity levels etc were correct. 95% of the floor is holding up fine just a few random spots are flaking off for no apparent reason. The chunks...

I applied the basic Epoxy coat to my 2 car garage in May 2010. The house was new but built in 2007 and sat unoccupied so the concrete was well cured. I did all the proper prep and install per their instructions. Everything was great for about a year. I started getting a few spots that flaked...

Yep 100% solids epoxy coat brand. It's been 90 plus degrees here in Tx and it's rock hard walking around on it

I laid down some epoxy Saturday night around 10 pm. The instructions say 2-3 days for "heavy traffic". Is 48 hours enough time to park 2 sub 3000 lbs cars?

I ended up going with Epoxy-Coat. I will put it down this weekend and see how it goes.

I'm new on the forum and have been researching garage flooring for my new (first house). I was originally going to buy a home depot cheap kit but came across this forum and got some more informed opinions. Despite reading a few small complaints here about them (which I believe were all...

What products do you reccomend for around the same price range? $400-$500 for a 20X20 garage.

New member here and almost ready to pull the trigger on epoxy coat. Are you in sales Christine? I have a few questions and need suggestions on what kit to buy.