Recent content by Crfdell

first time posting here. Picked up a Kreg jig, gripper, feather board and some steel rulers Not shown is a dewalt DW735 planer and a new to me 3hp delta unisaw.

Calcium chloride is a good product to replace salt and it’s easier on concrete Can be found at feed stores. keep in a sealed container or it will solidify.

Speakers, wish I had done this. Also second the switched ceiling plug, mine runs a dust collector mounted to the ceiling and have two other outlets for cord reels. If you think some shelving hanging from the ceiling now is the time to add blocks And yes I know I need another coat of paint.

Sounds like iron in the water or other metal reacting with the salt?

Sounds. Ore like hardness. Salt is water soluble so it shouldn’t deposit. Sample a piece and drop some acid on it like HCl if it bubbles likely not salt. Recommend a good pressure cleaning and inspection of your lines.

Made by Sonoco who also made pringle cans. And oil cans etc.

Camera with locator is the best way. If you were near me I would charge $250 and would cable the drain as well to remove blockages depending on what was found.

You really should have an engineered solution.

Shakers would be my vote.

24” deep and 18” high. Ceiling height is 10’ all theway around 3 1/2 sides.

Finished the siding on the shop now onto the pool shed. First time putting up siding went well we will see if we nailed it too tight in a few places lol.

Thanks, no Vehicles in this one we have a two car that I have been using as a shop until now. So far I am happy with it a few projects lined up for when I am done the exterior. This is for wood working and tinkering.

Cut siding to install on my new 14x24 shop. I know bigger is better but being in the city this was the max I could build.