D45's latest activity

I was initially thinking the blower motor was going out and caused the capacitor to fail? But it sounds and runs smooth

So the air conditioner was on and running but no air was coming out of the vents. Even with the fan on mode, no air blowing out...

Tank neck is bent or damaged. I had an old motorcycle 1978 XL75 with a steel tank. The hole got bent just slightly somehow and it never...

Definitely not overfilling it and not tipping it on its side Leaks gas, just enough to coat a small area, but shouldn't leak. The is...

New cap installed...... .same issue

Thats a interesting float switch, I'm not sure there

AI search shows that Hydromatic pumps are made by Pentair I think Pentair is or was a popular pool equipment company

The Wayne 1/2 HP and the Ridgid 1/2 HP were identical, so Wayne probably made it and it was sold as a Ridgid pump Quick easy swap I...

Do you "need" a concrete slab or can you frame out a ground level base using ground contact pressure treated? Then top it off with PT...

Fits great and connected a Noco 1amp charger also Starts easy as well

Larger pits also can use higher HP pumps from what i have read Mine is 18" in diameter and 24" deep 1/2 hp was suggested on pits...

The pumps basically all have standard size 1-1/2" threads Yes the 90' run is pitched downhill

The pump impeller may be worn. If the motor spins, the motor is probably ok for now. You may want to disassemble this pump to see what...

I ended up going with: Wayne CDU800 1/2 HP Submersible Sump Pump I've always ran 1/2 HP pump but my piping runs probably 100 feet to...

^^^^^^^ I'm cheap, was trying to save $10 I'll order a new cap