Damon L.'s latest activity

Designed a few different prints recently Magnetic Wera micro screwdriver rack Epoxy and epoxy paraphernalia holder

What level of accuracy are people trying to achieve with a hand held cordless drill where the hammer function causes (accuracy) problems 🤔

Just don't turn it to hammer and it's a normal drill..

Hammer drill works fine, and plenty fast, for me in concrete for my very, very, occasional use anchoring something. But apparently all...

Hammer drills work just fine for the limited amount of concrete drilling I do. I have zero desire to store an SDS for the once or twice...

In due time. She did specifically ask for practice and education in MIG welding, as that is what her next class is next semester...

Desiccant dryers are super inefficient and we only sell them in places they need air dryer than freezing. Ie a compressor room sends air...

I just did the oil cooler aftercooler on my setup. I remote mounted the cooler above my compressor room, and will have a box fan start...

I just run water in mine, and put everything to be cleaned in separate containers. The tank never gets dirty, and I use far less...

Problem solved! 😝

What about a dual hitch mount...

Well my Elegoo carbon 2 came about 2:30pm and I had my 11 and 13 year old sons unpack and set up the printer, and here at 6pm I have run...

It is worth noting that the Pexto shear was/is the standard of the industry, and it will provide a lifetime of service for you, your...

-Shearing or perforating metal always requires a percentage of material thickness gap between cutting edges. It's often called "cut...

Blades needs to be sharpened or replaced and gap should be set to cut a piece of .005" or so, paper.