Recent content by dds4

Weird...I never had that problem. Since it's self-leveling, surprising that the bubbles were still there from bucket to application on the floor.

Well, you can do one of two things: 1) Do one coat, but lay it on thick 2) Do two coats within 24 hours of each other, but a little thinner. After the first coat, I had some spots where the epoxy was a little thin. So rather than touching it up, I put a second layer on. My concrete floor...

Hello all-- Well, finally finished my 2 coats of epoxy-coat (www.epoxy-coat.com) on my 700 sq. foot garage. It was basically a two person job with my wife helping me with sprinkling the paint chips. She did a great job at that. I worked in small batches and that 2nd coat made a big...

My garage is close to 700 square feet and I ordered 1.5 kits. In retrospect, I wished I had ordered at least one more kit. They say it will cover up to 500 sq ft. with one kit, but it would be a thin layer and one coat would work if your concrete was nicely leveled and free from cracks and...

Whew! Thanks guys. I'm gonna sand right now while I wait for my 2nd full kit to come. I'll post pics once I'm done with the second coat.

I'm assuming I have to sand, etch, and rinse again? Ugh. I hate that part.

Epoxy coat. (www.epoxy-coat.com)

Hello all-- I just finished my first coat of epoxy-coat two days ago and I'm fairly satisfied with the result. However, there are some spots on the floor where the epoxy went too thin and some of the uneven spots of the concrete are slightly showing through. I would like to fix the problem...

I'm in the middle of epoxying my garage and just finished the floor grinding part. Here's my take, feel free to correct me if I'm wrong. Shot blasting: the best but not practical in most homes. Usually reserved for much larger projects like factories/shops with a larger surface area. A...