Eaglescout94's latest activity

The generator is propane. Unless I wired in an outlet by/ in the garage to utilize I would set the generator as close to the power in to...

Thank you for supplying the picture of the inlet receptacle, that’s the style I was trying to refer to but not the most tech savy to...

I’m well aware of what a suicide cord is, my confusion is how is me setting it up myself Vs just buying a factory made one any...

I've heard of suicide cord before, care to explain how they can offer a factory build cord to accomplish the same thing and be ok...

I picked up a used 13Kw generac guardian, after we've had some heavy storms and alot of power outages. End plan is to properly have it...

They can still be used as I bought them, cutting the flanges would just have more space for the Ben subframe. Even factoring the cost of...

Started laying out the spring hangers on one beam. Decided tonight to weld the angle of the neck, I still plan to plate over the...

If you decide to cut them down, you will need a track torch with a twin cutting head. other wise it will warp something terrible

As best as I can figure the beams are w12x26, the measurement charts are close to what they measure but not quite there. I have the...

Probably wouldn’t save me that much weight to be worth it, it’s gonna have 10k axles. The one area it might be helpful is between the...

I admit I’ve done no calculations for beam sizes needed. But I have looked at many of the big manufacturers for the sizes they use...

30’ of W12x19 was $851 pre tax, 54’ of the beams I got was $261. The plasma is maybe $300.

I'm working on building a 5th wheel hitch dump trailer. Instead of buying the dimension beam most trailers use I picked up some beams...