Recent content by fleming23

Those are the Pro 3.0 wall lockers, which I believe are 36". The 42" wide cabinets are newer.

Didn't read all 11 pages but did want to share a couple before/after of my set up.

If I was doing this for a living, absolutely. As a hobbyist, I have a roll cart I can use for the tools I need.

My C6 currently uses Motul 600 or 660 and the others are using Castrol SRF for clutch fluid. Make sure the fluid bleeds clean and the air is out, can be a PITA depending on access.

That I do not... It is a medium gray epoxy but I was not on site during the install yesterday to see what actual product was used.

It sounds as though you covered all your bases but no, neither this car nor my Chevelle are notchy going into or coming out of gear and they both have T56 Magnums. My C6 just got a new triple disc clutch and as it is an 06 it has a T56 instead of the later 6060, but does now feel a little more...

New LT4 with T56 Magnum, Ridetech Track1 suspension with Instinct shocks.

This is the floor choice for the house, as reference. It will get its top coat later today. This is a 3 car garage of about 900 sq/ft.

Making progress! I really went back and forth on floor coatings. Budget really only allowed me to do a sealer and densifier and I planned to use the stuff touted here on this forum... I wanted something that looked better though and was heavily leaning toward a polished finish as it was...

So...my thoughts on lift placement. On the 2 post, i wanted to make sure I was far enough away from the garage door to not interfere when the door is up. Assuming a car is on the 2 post, another car could easily be driven in/under/behind the car on the lift. I could have swapped the 2 post...

Good call! The cabinet placement is just tentative but your suggestion makes good sense.

Things are moving right along. Decided to drywall the entire inside in rather than use plywood, which was my initial plan. I think the drywall will visually finish better than the plywood and with so much more space I hopefully won't be banging into the walls as much as at my current house.

Thanks! That is helpful to know! With only 10' more width and 7 more lights, I think my lighting plan may be adequate until I get all moved in and can determine if I need anything tweaked just a little.

I initially sent this to my builder. I guess it wasn't "technical" enough

This is why I need a bigger shop :wtf: