Recent content by g3d0re

.

Ok so Heuer replied and said that's its normal, below is their explanation hope it helps other potential buyers. In the front jaw of the vice are some parts mounted. These parts are necessary that the spindle key is just under power and you have directly contact to the front jaw. Depending...

I pulled the assembly out and it has resistance with nothing attached to the spindle. Seems like it's internal, tolerances must be too tight. https://drive.google.com/file/d/1uUsH_ZqBXOByOAswkWZru_sbDK4KPPPG/view?usp=sharing Also the Heuer Maintenance Shows at 2.05min mark the spindle popping...

Not overly, if I remove it completely it makes no difference.

I saw the video and am yet to full remove the spindle part from the vice. All I have tried so far is remove the screw completely and that did not change a thing. The vice looks fine with no damage physically that I can tell but the box was a bit beaten up. I'll try removal the spindle completely...

Does anyone here own a new version heuer vice? I bought the 140mm non replaceable jaw model and wanted to ask owners if this was normal. I'm coming from an old record english vice that would only need my finger to open and close the vice with very small movement of the finger. The heuer vice...

Does anyone here own a new version heuer vice? I bought the 140mm non replaceable jaw model and wanted to ask owners if this was normal. I'm coming from an old record english vice that would only need my finger to open and close the vice with very small movement of the finger. The heuer vice...

Anyone know if the new knipex small wrench is available for sale part number 86 03 125

Put an order for the Marson, should have it in a week or 2. In the meantime I purchased the Gesipa NTS, yet to test it. Its not bad, nothing fancy. It looks and feels good, time will tell if it will last. I don't believe these are manufactured in Germany, there is not one place where it says...

On the snap-on site the marson unit comes up. http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=636276&group_ID=675766&store=snapon-store&dir=catalog Looking into the Gesipa NTS it's $50 or the Beta 1741U $40. What do you guys think? ***** I can't see them in person before I buy...

Thanks for that, will look into both. Was browsing amazon and found the Beta 1741U, I like that it is smaller than a standard rivet gun. Anyone have one or know if Beta tools are good. Never heard of them. Link...

Hello, Fed up with the el-cheapo $30 rivet guns that break after a bit of usage. Looking for a heavy duty german made or other hand rivet gun. Anyone had experience with such? Cheers.

Does anyone know if the gedore cantilever tool box has thicker material then the stahlwillle box.

Hello, Was clearing some old tools and come across this: <a href='http://postimg.org/image/45renx7an/' target='_blank'><img src='http://s11.postimg.org/45renx7an/IMG_5424.jpg' border='0' alt="IMG 5424" /></a> <a href='http://postimg.org/image/xm70qcdnz/' target='_blank'><img...

Thanks Monte, wupper tools look like they would be able to sell to me.