Recent content by Garage Flooring

  1. G

    Need Recommendation for Multi-Use Space

    I would do a couple of coats of clear polyurea. Tabular alumina in the final coat
  2. G

    Different flooring options - newbie questions!

    Garage tiles are quick and affordable. Easy to do
  3. G

    Will anything hold up to metal casters?

    Two coats of clear polyurea + anti skid in top coat.
  4. G

    Racedeck Tiles

    I would only suggest RackDeck Diamond or Racedeck Freeflow for this
  5. G

    Opinions on Rust Bullet Duragrade for 39yr old garage.

    Just stay away from anything 'no prep'. No Prep is short for no warranty when it fails :) If you are looking for a floor to use and abuse, do a moisture test, then put 2-3 coats of clear polyurea on it. Used a decent amount of tabular alumina antiskid in the final coat
  6. G

    Will a second coat of polyaspartic fix these roller marks?

    It's possible. You would need to lightly sand first.
  7. G

    8510 over 4500 # of coats

    There are two installation methods. Method A is two coats wet on wet. It is a great option for floors that are not power troweled. Method B is the flood method and only requires one coat.
  8. G

    Hellfire or a sealer?

    I can't speak for Hellfire other than to say it is a great product. We talk about coatings differently, but the average person, when the job is done, would not know if it was an epoxy, an MCU, or a Polyurea. Most of the difference is in the application. If you are going to clean oil off the...
  9. G

    🧩 The Coating Dilemma: MCU vs. Epoxy vs. Polyurea — What Actually Works and Why

    Primer for Polyurea is basically an epoxy. I prefer to just use more polyurea but we get enough calls for it we made it available
  10. G

    🧩 The Coating Dilemma: MCU vs. Epoxy vs. Polyurea — What Actually Works and Why

    In most cases etching . Talk your specific situation over with your supplier
  11. G

    Polished concrete garage floor

    Grind and polish look amazing, but it is high maintenance. My suggestion would be etch and seal. garageflooringllc.com/product/etch-and-seal-clear-polyurea-kits/
  12. G

    How to protect the concrete floor during construction

    +1000 form Ram Board
  13. G

    Concrete prior to epoxy treatment

    Sorry, Friday afternoons are pretty bus,y and the wife does not love it if I work on the weekends :) If you can remove the paint by hand, you can just etch. If you are unable to get the paint off I would suggest a full grind using the coating removal tool from Diamabrush. Typically, you can...
  14. G

    Ghostshield Oil Stains?

    Polyurea is the main component of the etch and seal kit. I’m not clear on the strength question: Clear polyurea is strong enough to be a stand alone coating. Colored epoxy or polyurea with or without flake needs a clear top coat . Polyurea can be used as an epoxy top coat The two coat poly...
  15. G

    How Long Before Rain Can get on Fresh Ghostshield 8510 Application

    2-3 daya
See more
Top Bottom