Recent content by GaragePilot

Bendpack needs to put correct info on the site. After the installers left I did my own adjustment to get the max height With cars on top I get about 79" on the lock at the lowest point which is on the back beam center were you get the most flex. You do have more clearance once you get a car...

I have one do you still need the info?

Not a bad option. I had bought a 1 gallon fortress from harbor fright that is ultra quite. I figured I can use it for airing tires as well and will put a small rack to hold it on the wall.

Pendpak shows it on the site but after I tried to buy it with my new lift install, they said it's discontinued due to reliability. How are the users here liking it 3 years later?

An update: I had the HD-9SWX installed and on the highest lock, the clearance is 78". If you lift all the way off the locks you get a max 82" passthrough clearance.

I have a long garage but not wide enough for the double platform lift. Plus that lift costs 28k pretty pricy. My door is 9' feet high and my lift would sit about 15' behind the door. Under behind the double lift I have another grand prix lift and a work area with gym. I would need to driver the...

Hi Steve had one on order. Is the lift in the picture with the Land Cruiser max rise on the highest lock? Can you measure the clearance please from the ground to the top? Is it 82" as Bendpak states? I have a Van that is almost 82" and trying to see if it will fit under? Thanks

Just put an order and install is in 2 weeks. It shows 82" rise clearance but would like to verify if anyone has one? My GP-7 2 post said 74" rise yet I only saw 69" on the last lock and 72" all the way up unlocked.

Shoot I need to set up email notifications for replies. The size is 3x3',6" and 8',6" off the ground from the bottom of the window. A little light comes in and didn't want direct light on my cars but have very strong LED ufo style lights that I can dim.

Update since last time the Genie Lift did the trick! Thanks for the tip Dustball and ideas from others. I bough their tallest model with the ladder. I was able to get everything up on my racks and clear so much floor space. I was also able to use it to pull a pallet with a short block on it and...

Hehe

I put the racks that bolt in because they can handle the load better and can handle more than a cable lowering rack. Also I'm going to be having a gym under one rack that needs over 8 feet of clearance and the other side will have cabinets that go 7 feet. So far the Genie lift looks to be the...

Ohhhh this might be the trick! If the legs can be removed when stowed, it would really help.

I was looking at those but not easy to store compact looks like?

It requires to much space to store. I was hoping for something like a ceiling hoist that moves back and forth.