Recent content by GoBlue22

I used a 3/4" Rapid Air kit in my install. Very happy, I also added a ball valve between the compressor and air regulator. I did a good leak check before the drywall went up and haven't had any problems in over a year now.

I emailed Rotary. They sent me a PDF drawing with their paint colors. Audi Gray = RAL# 7035 Black = RAL# 9005 Signal Blue = RAL# 5005 Chevy Blue = RAL# 5010 Carminr Red = RAL# 3002 Silver = RAL# 9006 Saphire Blue = RAL# 5003 Tomato Red = RAL# 3013 Traffic Red...

I'm getting started on grinding my brand new concrete floor (3500 psi fibercrete) that has previously been sanded with 80-grit. I am diamond grinding with an electric Edco single head with DYMA-Serts rented from my local hardware store. Diamabrushs are not available from any HD within two...

I am interested - would like to use a Diamabrush concrete prep tool for 1000 sqft. Need it in the next two weeks. Located in Central VA.

Scotty, any pictures of actual applications of the concrete dye? I'm interested to see how dark the "raincloud" color really is. Thanks,

Thank you for the comments. Construction will start as soon as I can get some quotes!

Time to build! Last year the house we bought has an existing 30x36 single slope roof pole shed. Looking to have a fully finished garage for working on race cars, other cars, light fabrication work etc. Main premise is to skin the existing structure with metal siding, concrete pad, buried...

Thank you, great comment. I am not a building code expert, but I found the VA residential building code this morning. Seems that a toilet has to have its centerline 15" from the side wall (min width of room 30") and there has to be 21" in front of the toilet to the nearest door/wall...

you are probably onto something. I just did a little calculation. My current garage on the house is 625 sqft, it has 12 96" T12 bulbs, 4400 lumens each at 5000K color temperature. That works out to 84.48 lumens/sqft New garage will be 29x35 interior dimension = 1015 sqft. 15 T8 fixtures...

I'll have two retractable electic cord reels in the ceiling, I usually use a work light setup like this for the under hood work: http://www.sears.com/craftsman-professional-fluorescent-work-light/p-03483912000P?prdNo=1&blockNo=1&blockType=G1# I like the idea of a wall mounted light, but I'll...

Primarily general mechanical on my track car, race car. Engine, suspension, brakes etc. No painting, waxing, buffing here! My plan is to have the lights in 3 zones. I have 4 24' banks of lights down the edges of 3 bays. How much less light do you think I could have in each one of those banks?

Your thread is what turned me on to floorplanner.com - I really like it. Just can't figure out how to make the ferrari stay blue in the 3D view (to match my blue corvette) My reading on GF says the same, you can't have too many lights. I need to finalize on what lighting fixtures I will use...

I'm about to start construction on my (36'wx30'dx12'h ceiling) shop for working on cars. It's a 3 bay setup with a lift in the middle, I'm planning on having 4 rows of lights, 8' fixtures to have a nearly continuous line of light down the sides of each bay (total of 15 fixtures). Looking at...

I'm finishing up my plans for converting 30x36 pole barn into an enclosed shop. Are there any threads or examples out there where someone has posted a written bid specification or other documentation they used to communicate the requirements to contractors so they could bid on the project...

Ditto that! I got the same problem!