Recent content by hboy7777

I think u may be getting into something much deeper. The problem with these is the spark plug threads break down from a bad casting. The heat from the cylinder leak gets past the spark plug threads melts the coil boot to the tube. Best case scenario is a time sert in the cylinder head but 90%of...

Ttt still have both

Ttt still for sale

I'd let it sit in the sun for a day or so. See how it looks after its fully cured

With the duplicolor product on bare steel it should only need a wipe down with wax and grease remover then a alcohol/water 50/50 mix. I wouldn't waste the money on adhesion promotor

I would probably go with an intercoat clear first then top it off with your regular clear. Would look crazy with a candy too. But if you're just going to rattle can it. I would use the duplicolor system with their wax and grease remover first.

Up. One still brand new! The season is coming!

Bump

Interesting. I've worked for Honda for 15 years and have never seen this issue on the civics. I've seen it on other models and unfortunately it usually ends with the head coming off. If you do succeed put a time sert in there instead of a helicoil

Ttt.....

Pm's returned

I'm in auburn ny. I can ship

(2) Dayton g73 heaters. One brand new I have 2 Dayton g73 electric garage heaters here for sale. One is used for one season, the other is still new in box. They are 220 volt. I have a 24x24 2 bay garage and one of them did great until the temp dropped to about 10 degrees. Then it took about an...

They make a paint gun cleaner for dried paint. Haven't used it yet though so I'm not sure how well it works

mine works great, just takes a little while to heat up when its really cold out.i have an uninsulated 24x24 though.