Recent content by JAB82

was a framer for 7 years this is what i would do and also i would use some metal flashing for the roof pitch change

I use 3M hi strength 90 spray adhesive for this. Tape off the areas from overspray. Test spray pattern on some cardboard then give both parts a good coating let it dry so not tacky and stick together. As others have said you only get one shot so start from the front and work to the back. This...

I would think it is Baltic birch and is a plywood with many small layers

I just did this used a 1x board at the wall in the back and metal L brackets along the wall and floor and this at the front to attach the dish washer because no drilling in to the quarts for the dish washer...

I move one last year it has the removable skates I just used ratchet straps to secure the skates to the cross members rolled it up to the trailer set up a engine hoist inside the lift on the ground picked up the front crossmember pushed it on to trailer then moved hoist to the trailer in front...

I use plastic spring clamps for my 2 inch binders

saw this and thought of you 48ft Landoll, hydraulic semi trailer https://milwaukee.craigslist.org/tro/d/waukesha-48ft-landoll-hydraulic-semi/7379656228.html

Once you put the ceiling in it will not shake if you cant do it now that's ok it is plenty strong with the roof sheathing if you still want to do something before you install the ceiling you can install 2x4 on the top of the bottom cord of the truss at a angle from the gables to the 35 foot...

first let me say that I love reading this thread and sometimes I don't get time to read it but when time allows I spend some time catching up so here I am reading about the carpet squares you put down upstairs and I wanted to lend some insight on how the PSA glue(Pressure Sensitive Glue) works...