Recent content by Jay H

Anyone use the DANMAR RJ-6 on Bendpak lift instead of the one (RJ-6) sold by Bendpak?

I am looking a sliding jacks for HD-9XW 4 post lift. Bendpak has RBJ-4500 and RJ-6, but I saw this lift by DANMAR and it appears to be identical to RJ-6 but hundreds less. Anyone used the DANMAR on Bendpak lift? https://www.summitracing.com/parts/dmr-1375901/overview/...

POR 15 has some stuff out for calipers. I would take apart the calipers and powdercoat.

I was hoping rustoleum, etc had a paint color specific to the Rotary blue they use.

I just bought a used Rotary lift. The arms and base of posts need some paint. What name is the closest blue to Rotary blue color? The arms are blue also, not yellow. thx. -Jay

Its like a Sherwin Williams or Glidden. Just another retail paint store from what I can tell. They have been great to work with. Alot better than the SW stores I went to and spoke with. The ICI outside rep drove 20 miles to my house just to drop off a color chart for me to decide on. He...

Jaquar, I'm doing my floor this Friday with Devran 224HS. I spoke with 2 outside reps with ICI paints. They both recommended thinning the first coat of 224HS and not using a separate primer. As far as urethane, you can use 378 (semi-gloss) or 379 (high gloss). It was recommended to me to use...

Notch, The only reason for not using the DevFloor 521 is for ease of installion and pot life as I have nobody helping me.

Great Job. I plan on doing my shop with the DEVRAN 224HS also. It looks like it spread/leveled out very good.

Which Devoe product do you recomend Eric? The Tru-Glaze 4508 or the DEVRAN 224HS? The 224 has 75% soLID VS 52% on the Tru-Glaze. thanks.

All SW stores would sell it to me and all the stores are in the same area (within 20 miles of each other). They dont seem to know their product or they just dont care unless your have an account with them. Oh well. ICI Paints seem to very willing to take my $$ and offer the same/equal product...

Im in the process of finding an epxoy to do my floor. I have been looking at Sherwin Williams Armseal 1000 vs ICI paints (Devoe Coatings) 224HS Solid epoxy. The ICI Paint store quoted me at $49 per gallon for PART-A and PART-B. Seems that alot of people like the Armorseal so I called...

I have 2000 sq ft and I used muratic acid. I did mine in sections (quadrants to be exact). I had new concrete as well and I used 1/2 gallon of acid per 5 gal of water. I tried the recommendations per directions on acid bottle and it did not bubble on floor. The misture I used worked great...

Yep, saw that thread. I was putting it out there hoping others would respond with experiences if anyone had them. Seems like a good product.

thanks again. Im actually now looking at Devoe Coatings product 224HS as this has a solid percentage of 75%. This product seems a little better than SW's Armorseal.