jayz66ragtop's latest activity
-
Jjayz66ragtop reacted to Old tool guy's post in the thread The Everything 3D Printer Thread with
Like.
I got the combo with the basic ams. -
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.I think you'll be much happier with the P1. It's an older model but still a good one. Did you get the combo or just the P1S?
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.I agree with kaymccampbell's comment/assessment. I think you have cooling issues based on this print and the transparent PETG above...
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.Not trying to **** on any specific person/purchase, just sharing what I found with the EXTENSIVE research I did prior to buying my X1C...
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.My own fault but had to take apart the H2C's extruder tonight I wanted to print something in ABS and use PETG for the support material...
-
Jjayz66ragtop reacted to Old tool guy's post in the thread The Everything 3D Printer Thread with Like.
Second run, feeding from the active sunlu drier, the print came out perfect. The hairs on the first one won’t show when assembled so...
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.Apologies, for some reason I thought you had an H2D but the disconnect tool still should work.
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.Assuming you are talking about the left and right PTFE tubes in the picture below, it can be a little tough getting it to disconnect...
-
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.I concur, had the same issue with TPU until I dried it 15+ hours and it was down to like 10% humidity.
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.Not really 3D printer related but close enough. Anyone else having issues using Fusion 360 in the last month or so on a Windows box...
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.I think I shared mine earlier in the thread but too lazy to go find it. This is my setup for the H2C, the X1C sat on top of a two...
-
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.Since replacing the H2C's AP board, I have ~80 hours of print time and all seems to be back to normal. It may be just me but it seems...
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.3D printing life size power wheels?
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.Well, had my first "incident" with the H2C :( Been holding off on reporting this until I had a more concrete answer and solution. The...
-
Jjayz66ragtop replied to the thread The Everything 3D Printer Thread.I'll echo what others have said, if you can swing it the P2s is the sweet spot. You get the enclosed chamber, better screen, and pretty...
