Recent content by jayz66ragtop

I think you'll be much happier with the P1. It's an older model but still a good one. Did you get the combo or just the P1S?

I agree with kaymccampbell's comment/assessment. I think you have cooling issues based on this print and the transparent PETG above. Bed slingers ( traditional 3D printers, non core XY) tend to have weird line separations like that on taller prints due to the part jiggling the further away...

Not trying to **** on any specific person/purchase, just sharing what I found with the EXTENSIVE research I did prior to buying my X1C and again before buying an H2C. IF you are going to print anything other than PLA or PETG it is HIGHLY recommended to get a printer with an enclosure OR...

My own fault but had to take apart the H2C's extruder tonight I wanted to print something in ABS and use PETG for the support material since they don't play nice together and should separate easily. The slicer has a warning not to print high temp (ABS) filaments with lower temp (PLA and PETG)...

Apologies, for some reason I thought you had an H2D but the disconnect tool still should work.

Assuming you are talking about the left and right PTFE tubes in the picture below, it can be a little tough getting it to disconnect using a finger. You don't just press it down and then let go, have to keep pressing down to keep the connector released until the tube is all the way out. They...

I concur, had the same issue with TPU until I dried it 15+ hours and it was down to like 10% humidity.

Not really 3D printer related but close enough. Anyone else having issues using Fusion 360 in the last month or so on a Windows box? Beyond simple things like importing a mesh or creating sketches it causes my computer to freak out and eventually become unusable and have to reboot. Did a...

I think I shared mine earlier in the thread but too lazy to go find it. This is my setup for the H2C, the X1C sat on top of a two drawer filing cabinet with a wire rack next to it full of ****. Part of my homelab making a cameo in the first picture The AMS2 Pros tilt forward and down to...

Since replacing the H2C's AP board, I have ~80 hours of print time and all seems to be back to normal. It may be just me but it seems like the printer is slightly faster. Don't know how to describe it other than it seems "smoother" too, meaning the head movements seem to be less "jerky". It...

3D printing life size power wheels?

Well, had my first "incident" with the H2C :( Been holding off on reporting this until I had a more concrete answer and solution. The "AP board" went bad, apparently this is the brains of the printer and when it goes bad the printer stops working. I leave my printer on 24/7 because I dream...

I'll echo what others have said, if you can swing it the P2s is the sweet spot. You get the enclosed chamber, better screen, and pretty much the latest design without the $$$$ of an H2 series. If you think you'll print with filament other than PLA or PETG you are going to want an enclosure and...

I saw that and other derivatives but wondered how ridged it is to put enough force on the switch in the back. My H2C doesn't seem to be nearly as hard to turn on and off as my X1C so maybe it would be good for the H2C. Would you or someone else who printed it report back in a month or so about...

I jumped right in the deep end and downloaded Fusion 360 since they have a free non-commercial version and for some reason had it in my head that was the way to go since all the big CNC/design companies whatever that means use it or one of the $$$$ packages. I have since found the same as you...