Recent content by JDweld98

The battery, fuses and relays are up front but other than that yeah everything is under the seat so I do have to take it on and off pretty frequently. Sent from my SAMSUNG-SM-G930A using Tapatalk

I take the seat off fairly frequently. The seat has to come off in order to access the airbox to change the air filter. The way I ride I usually change the filter every 200 miles or so. Plus after spending what I did on the machine Itself I just wouldnt feel right gluing it on. Sent from my...

The only way I could get behind the baseplate is by taking off all the upholstery and if I did that I think getting that back on would be even more of a problem than the pegs. The pegs are solid though. Sent from my SAMSUNG-SM-G930A using Tapatalk

I have a 2014 Polaris Sportsman 850XP and what I'm currently trying to fix is just two small plastic pegs on the bottom of the seat that pop into place and keep the seat in place. I've found that they work great unless you install the seat incorrectly then sit on it... So now I'm left with two...

It won't necessarily explode at 15psi but it is possible. Acetylene becomes unstable at 15-32psi which means it can spontaneously explode. It cannot be predicted if it will indeed explode at these pressures. At 33psi it's behavior becomes predictable again and it will explode. This is what I...

In the past week I've been been using my Oxy/Acetylene torch more than I usually would and it got me thinking. As you probably know; Acetylene is unstable and can explode when pressurized anywhere from 15-32psi and will explode at 33psi, unless it is in an acetylene tank where it can be...

Have you thought about making a hammer rack? I can easily imagine how one could be made but the initial complication I could see with it is that because hammers vary in their dimensions so much it could be difficult to just have one design that works for everybody.

My favorite is Mac. The location of the knurling is the main selling point for me. http://www.mactools.com/en-us/Ratchets-and-Accessories/Three-Eighths-Inch-Drive/6018ab3d-a99c-45db-959d-a46f0145ba81/3-8-Drive-Knurled-Extensions/X3EK/3-8-Drive-Knurled-Extension-3

I got the 4147-6 for $350 http://www.amazon.com/dp/B000FAPVQ8/?tag=atomicindus08-20

I bought their 60pc. 1/4"dr., 49pc. 3/8"dr., and 47pc. 1/2"dr set a bit over a month ago. Overall quality is great! I did have a problem with the 3/8"dr set where the deep 17mm socket was missing and instead it had two of the deep 18mm sockets in it. I sent SK an email about the problem and they...

I'm only seeing it in deep but heres a 16mm socket 12pt 1/4" drive http://www.zoro.com/westward-socket-14-in-dr-16mm-triple-square-10e882/i/G5088264/?gclid=CjwKEAiAuKy1BRCY5bTuvPeopXcSJAAq4OVs4zcs6jPKexjg6GDrtL01FXVkqjWoCxP7tGKJi_yUIxoCkQ7w_wcB&gclsrc=aw.ds

And I just realized what sustainable supply does... Don't buy from that link unless you want regular shipments of that socket.

http://www.sustainablesupply.com/Westward-Socket-1-4-In-Dr-16mm-12-Pt-Std-10E878-C1297386?CAWELAID=120205040001842161&CAGPSPN=pla&catargetid=120205040003183110&cadevice=t&gclid=CjwKEAiAuKy1BRCY5bTuvPeopXcSJAAq4OVsOHHPMofs6vDROq90XZtv_fOHypQ6ciFPVzGoQPI7ahoC3pTw_wcB...

I'd be curious to see where these sockets would be used. This set costs over $40k so I don't think I'll be buying it anytime soon. https://store.snapon.com/Shallow-inches-Set-Socket-Shallow-Impact-6-3-4-to-8-11pc-6-Point-P737944.aspx

Yeah they get pretty specific. I can't remember what they're used off the top of my head but I've seen 2-1/32" sockets out there.