Recent content by Joe0121

150 isn't bad at all. Just Make sure you check out the minimum bend radius As long as you don't do a 90 in your conduit your probably ok.

I got tired of fighting autocorrect. I just wasn't sure why OP was balking at the price of 100m fiber Optic cable in the grand scheme of things.

Yeah thats where your cost is coming in. You can spec out the same network with Ethernet only switch with google wifi for A LOT less and Add some Ring camera with their 10/m monitoring could save some cash unless there are specific thing your really like about the ubiquity gear.

$185 x 2 or 40 bucks for this https://www.amazon.com/dp/B008ABLU2I/?tag=atomicindus08-20 Plus the cable modem OP's cable provider rents to him. So yeah copper is considerably less expensive than fiber.

What Ubiquiti switch are you using? I didn't know they made an switch the support 10GB Ethernet Fiber. When I looked into this a couple years ago small home switch that support fiber SFP's where in the hundreds of dollar range whereas Ethernet managed switch are in the tens of dollars range. You...

The cost for Fiber is in the SFP's and associated switches. Also SFP's Go bad. Just seems like a lot of cost Especially considering you are well within the Spec of Cat 6 Cable. If you are burying it in the ground you dont have to worry about temp shortening the effective range. I would just buy...

Look into POE camera. Than you can use a POE switch and have only 1 cable to run to each camera. avoid running data line parallel to power lines within 1 meter or within 3 meters of florescent light ballast. Though with Cat6 you could likely get away with it...

Pull a 6.0L Truck motor. A big Ebay Turbo, and make a freight train out of it.

It's been standing for about 6 years. When they first built it the only put the roof on and no siding on the shell. They were "waiting for their tax return" for about 5 years with no siding and just the roof. I think they are just nailed. At a minimum I think I may add one of these to each...

I may be buying a house that comes with a pole barn. In looking at the inside I don't think this is built properly to support snow loads in Ohio. The pitch doesn't seem still enough. I am also concerned there isn't anything tying the rafters together where they meet the walls. So there is no...

Copper Pipe for Air is pricey This is what you want: https://www.amazon.com/dp/B005FKYRTU/?tag=atomicindus08-20

My Father in Law owns a John Deere Model B, a 2510 and a 60 Vintage Back Hoe. When the Time comes I'll be glad I kept all my SAE sockets around. I also use them A lot on Fastnerrs and even new cars generally have SAE stuff on suspension components.

I have asked many People local to me who are professional welder and by far the AHP Welder give you the most quality and performance for the Price.

Just got a quote from a local Insulation Place. The Recommended doing 3 inches of spray Foam under the Floor of the Mezzanine and r19 fiberglass under that to save a little money VS All Spray foam for the ceiling. Still 3500 bucks is A lot of Money. 24 X 30 X 9 ROOM WITH FLAT CEILING WALLS-...