Recent content by katsarosm

Using plastidip in cold conditions is tricky — great that you’re planning ahead. One option: rent or borrow a pop-up canopy, attach a space heater rated for outdoor use, and ventilate well

Modern vinyl flooring has nothing in common with what it was 10–15 years ago. The UV layers, sound insulation, and locking system change day-to-day use. I went with Absolute Floors for my kitchen, dining room, and hallway. Two days later it was in, no dust, no adhesive smell. The surface feels...

You might also check with Battery Rebuild Service or BigBatteryRepair, both will rebuild Milwaukee packs and let you choose between standard or high-discharge cells. Sometimes cheaper if you're doing multiple units at once.

Never thought I would see someone mention Supreme Products Corp here. I actually found a Versamitic years ago at a garage sale for $10 and it still runs perfectly. Those things were built to last forever.

Looks like a standard peened nut. You can usually knock it loose with a punch and hammer, or grind off the edge carefully if it's frozen.

I would start with a structural assessment of the existing deck. Here in Vancouver, Lifestyles Outdoor Living found that the old deck was nailed together instead of using structural screws and didn’t meet frost-depth requirements. I rebuilt it, and it ended up cheaper in the long run than...

I'd definitely get that taken care of sooner rather than later. I left mine too long and the cold air almost ruined a shipment. I reached out to Paratec Door Solutions since they specialize in commercial doors like Raynor. They don't handle home garages, just business doors, but that worked...

I just checked my main roll cab and I’m sitting at 11 sockets and 4 wrenches. Didn’t realize how many oddball 10mms I’d accumulated over the years until I actually counted them

I think the safest rule is to do what the manufacturer drew, especially when the drain body is plastic and the sink is porcelain. The "put plumber's putty on everything" advice comes from older metal flanges; modern kits ship the right gasket and expect a clean surface and moderate clamp load...

For 10-12 feet at home, I usually reach for a piece of extruded aluminum or magnesium, like the kind used for concrete screeds or tile work. They stay straight much better than lumber or MDF, especially if you’re dealing with any kind of humidity. If you’re in a pinch, you can laminate a couple...