Recent content by larryforce

No I never got around to it, I figure it was lesson learned, and it wasn't a huge investment. I ended up with a stant style from Mac, plus it works with the same adaptors as my vacuum filler

The blue point gun is great, it is as strong as the snap on, but doesn't have the newer vibration dampening and it's affordable, if you have a snap on dealer you can probably get a new one for 180 ish I was recently going to purchase a smaller all purpose air hammer(my high one is an atlas...

You can start a session with the old bcm in, then swapp the modules. Them go to module programming and program the bcm with as built data.

I'd hate to pay 44 USD per socket plus inflated shipping to Canada. I bought the ones I have off the truck for 25-30 CAD, but I get really nervous evertime I think I lost one, was thinking of ordering a spare.

Good morning, mabey you guys will be able to help. I have an 8mm and 10mm 1/4 drive pinless impact swivel like this. https://www.matcotools.com/catalog/product/AUP8M6B/1-4-IN-8-MM-UNIV-IMP-SOCKET/ I no longer have a Matco dealers, and was hoping to find another seller, so i can buy a couple...

Thanks for the advise, I tried a bit of silicone lube on the seal, after that ddint work I would it. Helped a bit, but not enough. Took 5min if pumping and couldn't get more then 10 psi had to borrow a stant tester from another tech. I may have to call it lesson learned and buy a...

Hi. I recently bout a 7859 cooling system pressure tester. And I like everything about it except for mabey the most important part. I have trouble building pressure with the pump, I find that only a small portion of the stroke builds any pressure, and that there is a little bit of play...

Yeah, my Mac driver warrants against breakage.

And my first generation Milwaukee 2763 has not failed me on school bus lugnuts (450-550 ftlbs)

Where do buy my tools? The tool trucks Amazon Princess Auto Kms tools

Ex Me as well, except mine was a 10mm, and got beat on excessively. The wrench bent very slightly but still functions great 3years later I thought about exchanging it, but I really abused that wrench, and it is obviously up to the task, so why get rid of it

I work at a ford dealer and use it all the time. It works great, but if the lug nut is swollen really bad I might need to use a 20mm. It doesn't remove all the frustration, and will sometimes stick on the lug nut still, but 80% of the time it works great. I wish I could have found a...

Don't pull the trigger unless you have the bit held against something. This is normal

I just bought this one. I hope it's as good as I expect it to be...

There are a couple of the exact model pictured above on ebay for a decent price, I am so tempted to pull the trigger, but I don't think my finances will allow it today