Recent content by M-EGT

  1. M

    Found some cool Harrold tongue and groove pliers. The design of the head allows them to open up fully

    This is after I cleaned and oiled them
  2. M

    Tony W. Helm, Mechanic, and his Beguiling 360* Swivel/Flex Drive Joint

    That would be my guess, especially if going off of a memory from many years ago. They do look similar
  3. M

    Found a Thor Power Tool flex driver, same as Helm PFD-90 and Blue Point GA-290

  4. M

    I found a 1/4 driver I haven't seen before

    Oh yeah, that's it alright. 👍
  5. M

    What’s the use case for the new tekton 1/2” drive large impacts up to 50mm?

    I have an SK impact set that includes a 46mm. I wondered what the heck it could be used on
  6. M

    I found a 1/4 driver I haven't seen before

    On the left is the standard one. In the middle is the flex spring style, but on the right is a swivel type head I haven't seen before. No name, just says USA on it.
  7. M

    Bought an electricians tool case and found an RCA driver set

    I just checked, all the "bits" also have a 99 number on them too. So that sounds right
  8. M

    Bought an electricians tool case and found an RCA driver set

    Hoping to get some info on it. Comes with a bunch of screwdriver shanks and nut driver shanks.
  9. M

    I found a Bonney socket set case with 12-pt 1/4 sockets

    What did it originally have it in? Was surprised to see the sockets as 12 point
  10. M

    Adding more unusual sockets to fill in the holes in my collection

    I actually have 2 sockets that don't have homes. A Proto 1-5/16 shallow I found years ago at pawn shop and an early Proto 31/32.
  11. M

    Adding more unusual sockets to fill in the holes in my collection

    Uh oh, haha. I thought this was pretty complete. It includes the x/32 sizes, up to 22mm in 3/8. Up to 1-1/2 in 1/2 drive. And so on.
  12. M

    Adding more unusual sockets to fill in the holes in my collection

    I like these because of the variety of sizes.
  13. M

    Adding more unusual sockets to fill in the holes in my collection

    I have the Craftsman socket holder. Since I'm here in the Southwest I don't often use 6 point. So I decided to fill everything with 12-point deep deep and 12-point shallow (with the exception of 1/4 drive, those are 6-point) Just recently added 20mm deep 3/8 drive (Proto) and 1-1/4 deep 1/2...
  14. M

    Do you often use a 1/4" nut driver screwdriver?

    Can't recall ever using a nut driver, but a 1/4'' drive spinner handle, yes, all the time.
  15. M

    What kind of pliers are these, I haven't seen them before

    just looked that up, that seems correct, thanks!
See more
Top Bottom