Recent content by Metallo

  1. M

    Wheel hubs/Tone Rings puller

    Thanks, Matt. At the moment, I have no space for a H press, I need something to work on my bench. Any brands you would recommend? Alex
  2. M

    Wheel hubs/Tone Rings puller

    20C$ = 16 US$ and Moog is middle range stuff, they have never been on my list of parts to be purchased, they have nothing to do with what I have in place right now. The car is old, I cannot complain if a wheel stud stripped after 21 years, but if it happens again on another wheel, I will do the...
  3. M

    Wheel hubs/Tone Rings puller

    It's all done. In order to avoid any risk, I took the whole assembly to a mechanic, he has a 25T press, he heated and removed it in 15 min. I took the whole thing back home, I cleaned everything, put the new wheel stud(s) and re-pressed myself using a vise and a piece of wood to hammer the...
  4. M

    Wheel hubs/Tone Rings puller

    I am aware of the risk, it is certainly a hot fit, torch first and then press. The tooth ring can be purchased separately. Below some additional pictures.
  5. M

    Wheel hubs/Tone Rings puller

    The whole purpose of this conversation is to look for advice on which tool to buy for this kind of work. With 3 old cars, wheel hubs etc. are often to be removed, not necessarily because they brake, for instance, the wheel hub in the picture is 21 years old and it works perfectly, but I need to...
  6. M

    Wheel hubs/Tone Rings puller

    Do you mean a mechanical 3 jaws puller? There are wheel studs locked in the hub, I need to block that part to get the 3 jaws puller to work, I guess?? I was thinking to something like this: https://www.harborfreight.com/bearing-separator-and-puller-set-62593.html But I also need a short pipe...
  7. M

    Wheel hubs/Tone Rings puller

    Those are two pieces and I have already tried the heating stuff, a circular part it's hard to lock it in a vise, I am thinking to something with separating jaws and mechanical pullers.
  8. M

    Wheel hubs/Tone Rings puller

    Hi guys, I own three Volvo cars, I do most of their maintenance myself but there is always something missing from my tools, currently, a gear puller. I live in Canada, due to the salt used in winter it is very hard to work on cars and I need good tools. I noticed that Harbour Freight sells a...
Top Bottom