Recent content by mopar4don

SWEET

interested and watching

NICE!

Thanks Robert. I really hate giving up on the donut dolly BUT I need to move forward. (maybe as a perfectionist, that's why restoring this car is taking way to long) I don't have a dent puller but do have the O/A torch with the small tip. And as per your instructions will keep it from getting...

Due to my lack of progress with the donut dolly, I was thinking about trying O/A torch to shrink. I have seen different methods on shrinking with a torch but how would you go about it?

Yes mig weld. I should weld it now right?

Would a weld dot right in the center of the bulge be causing me any problems? I also noticed that it has a crack along the edge. I'm sure it happened because of all the hammer hits it received. I should probably re-weld it now before I get the metal moved into position?

Is it normal for those loose areas to tighten up as I shrink some highs? When it happens it feels like I just lost the ground I gained.

Ok I just shot these 4 videos. Tell me what you think part1 part2 part3 part4

I really appreciate your help! Your write up explaining the principles is absolutely amazing and makes sense. However in my case (because of inexperience) I think my biggest problem is reading the metal, or knowing what to do and what not to do. I agree with your assessment of my hap-hazarrd...

Ok here is the last video of the day. I am TIRED. At least 4 hours of hammering. What am I doing wrong?

A little hammer action

Hope you can see the raised area

I will post a video early this afternoon. Thank you

Yes it will push up. It is still in the same condition of the last video