Recent content by rakane

I'm in. Sent from my SM-N950U using Tapatalk

https://r.tapatalk.com/shareLink/topic?url=https%3A%2F%2Fwww%2Egaragejournal%2Ecom%2Fforum%2Fshowthread%2Ephp%3Ft%3D245837&share_tid=245837&share_fid=20318&share_type=t&link_source=app Post #32 Sent from my SM-N950U using Tapatalk

Now insulated and the wires are secured. The 2 doors side by each use them. The installer had to frame a bit but it worked out. There is not enough room behind the spring to install my OSB. The insulation takes up that space. I don't look up there and I'll never mount anything there so it...

I also have 3 Liftmasters on 14' doors. Love them. Sent from my SM-N950U using Tapatalk

Re: What did you do "IN" your garage today? Getting the 4th wall painted. I hate painting around fixtures, but once done the rest will be easy. My boat sits in the rain until I'm finished.

Bought a $40 Harbor Frieght workbench with a vice from Craigslist. Got it home and looked up the vice. I did OK. Sent from my SM-N950U using Tapatalk

Unloaded a heavy workbench I picked up. Well used but it will work. The first thing on that wall. Sent from my SM-N950U using Tapatalk

Got around to putting casters on an old wire spool with three general purpose gadgets I find useful. It is an attempt to save space. Sent from my SM-N950U using Tapatalk

Yeldogt, good observations on the high ceilings. I'm going to locate a heater in my 16' eve shop, the peak is about 24'. I'll take your advice. Sent from my SM-N950U using Tapatalk

Had the electrical and got passed on a final. Nice to have the big doors hooked up. First 2 toys mounted on the wall. The bottle opener came home from Dublin. Bass via EBay. Sent from my SM-N950U using Tapatalk

Outlets where my work benches will be against the wall. I'll have a retractable power cord with multiple plugs in the middle of the wall. Sent from my SM-N950U using Tapatalk

Test LED. All the doors were shut. It will be higher. We just wanted to light up a work light and see the light in action. I'm going to like these lights. Sent from my SM-N950U using Tapatalk

Started some electrical. The low boxes will have 4 outlets using metal clad cable. A couple high runs will be romex to save a few bucks. You can just see some chalk lines for the outlet boxes. That is where I plan on work benches. Storage will take up a good part, with work space for a...

Zippy, I used the Kilz2 with no other application. I think I'll leave it at 2 coats. I had planned on putting a final gloss paint but frankly I'm tired of painting. I used a cheaper thinner roller for the first coat. That was a mistake. A thick roller carrys more paint and covers rough OSB...

I bought a jack but didn't realize it only lifts in landscape mode. I have a couple coats of Kilz2 paint on the OSB. Almost time to get my lights up. Pulled an electrical permit. The lights and power doors will be great. Looking forward to those upgrades. Sent from my SM-N950U using Tapatalk