royce's latest activity
-
RNo make or model on this big guy. 9.25” jaws, 515 pounds finished weight. 18” tall and 44” long. It’s a beast Kevin. Jeff and Alex...
-
Rroyce replied to the thread The VISES of Garage Journal.nice job Kevin
-
RJust finished this little one and they are built very Well Micah.
-
Rroyce replied to the thread The making of a table.Looking good Riv
-
RHappy 4th of July everyone!!!
-
Rroyce reacted to john.k's post in the thread The making of a serrated tool steel vise swivel jaw with
Like.
I use a Landis type thread chaser in a shaper...... although any chaser in a coarse thread will do , like common 14 tpi... -
Rroyce replied to the thread The making of a serrated tool steel vise swivel jaw.Next up heat treating. Kevin gave me the parameters he uses for A2 and a hardness of 54-56 Went to a buddy's shop who has an oven and a...
-
-
Rroyce replied to the thread The making of a serrated tool steel vise swivel jaw.Next up drilled, counterbored and tapped for 1/2" shoulder bolt. Then started on bronze pivot mount, rough shaping and silver brazing a...
-
-
Rroyce replied to the thread The making of a serrated tool steel vise swivel jaw.Next up sawing to rough shape Then milling to final dimension Then bored for rotary table center pin Then cutting apex radius on rotary...
-
-
Rroyce replied to the thread The making of a serrated tool steel vise swivel jaw.Kevin gave me the pitch of .125 and rough depth of cut of .035, so I set up to test cuts to verify depth. Then drilled and tapped the...
-
-
Rroyce posted the thread The making of a serrated tool steel vise swivel jaw in Metal Fabrication & Techniques.This is new ground for me, having not worked with A2 tool steel nor having ever serrated a vise jaw before. It is an interesting swivel...
-
-
REmmert K1 back online. I lucked out on a few deals on spare parts like the front collar and ever missing tilt bracket. It was a bit more...
-
Rroyce replied to the thread The VISES of Garage Journal.Thanks The wood might not be ideal but has worked on another vise and was left over, so I used it again on this vise. If it fails it...
-
Rroyce replied to the thread The VISES of Garage Journal.Once in a lifetime vise. Bonney Rapid Transit #160 5-1/4" jaw width 10" opening Parker style jaws Fast acting gear rack and pawl coarse...
-
