rslaback's latest activity

Yushin

It is indeed a Japanese robot. In their power spec is the 200 a single hot to ground/neutral or 2 hots 180 degrees out of phase?

I noticed this voltage spec on a piece of automation equipment tonight. Am I correct in assuming that since we are looking at 200 and...

I've always hated how tall most of the mtx shifters are in cars from the 2000s. It feels super high to me almost like you're driving a...

Yes. The Centura carbs use a plastic emulsion tube. That was removed from the body, all parts went into a heated ultrasonic cleaner...

This uses a Tecumseh Centura engine. They don't have a choke. They rely on the operator to pulse the primer bulb enough times to semi...

Well, I cleaned the carburetor as a long shot. Same behavior.

It's got an auto choke but it will give me a backfire pop every now and then at shut off so i don't think it's starving.

I know a bit more about pressure washers than the average chap but this one is a new one on me. I picked up this Karcher washer cheap...

It became obvious that I was going to need to machine my own and these are finally done. They are made from 3/8 angle with a flycut...

I did not make new ones. I have read that the cook time increases the depth of the case. From that I am assuming that worst case I...

I know that it is at least somewhat hardened which makes me question the temp read out of the first oven. But I also figure that giving...