Recent content by rumb

Why nobody uses CEJN? It's very well made HI FLow couplers. Little pricey, but I like it. I use 320series. End eSafe series prevents pops out, then disconnecting.

Yes, I have found this drawback in HEUER too. Ridgid is more rigid. But I dont like handle in Ridgid, I pinched my fingers between handle and moveble jaw! There is no much space, and if you not careful, fingers get pinched.

In test he uses 120mm version, it's Weight just 9,0kg, but holds plenty of abuse. 140mm (Jaw width) much beefier and weights 16kg -I have one (140mm) on swivel base - I know, that I am talking about. Of course, there are many very good vises, bit imo, HEUER in price\performance one from the...

IMHO - The Best Vise On The Market - HEUER Front. It's drop forged steel, it's has double start thread, it's smooth and it's not so heavy, so you need a crane to put it on workbench or clean. And it had pipe jaws and slim design, that allow to put some long tube vertically. Why you need so...

I have Norbar Nortorque 340 60-340nM - very well build! 60teeth

Use ParkTool TW1 + 1\4" to 3\8" and 3\8" to 1\2" adapters and socket 32mm. May be it's for bearing preload on a hub. After tightening to 3nM you need add some stopper, to prevent unscrewing. ParkTool TW1 - very usefull tool. from 0 to 7nM

Gedore 2946599 (Series VDE 3093 U) VDE Reversible ratchet 3/8" look nice too: https://www.gedoretools.co.uk/gedore-2946599-vde-reversible-ratchet-3-8.html

Never store torque wrench click type on 0! store it at minimum. I have Teng-Tools 20-110nM torque wrench, and it's need to be stored at 20nM. If lower, it's can be damaged. I compared it with beam type Park-Tool TW-2 - it's spot on in any reading from 20nM to 70nM.

It's already second 125mm HEUER FRONT I restored:

Made from metall by me. Safe. separates on 4 pieces. ramps is 170cm long + 50cm flat surface. Height 25-28cm.

What is real AIR consumption on Hazet 9012MT impact? 135 l/min (2.3 l/sec) - is it average air consuprtion or at LOAD? Ingersoll Rand has two number in specs for their producst. Example for IR 35MAX 1\2": Air Consumption @ Load (L/min) - 481 (17 CFM) Average Air Consumption (L/min) - 113 (4 CFM)

My HiPer! Hazet 916 HP. Only 45€, can't resist to buy one. :) https://photos.app.goo.gl/NzzUdV8W4jk2oFsR8

300kg on 19cm length of the beam is just ~512nM = DIN3122 standard, nothing special. I believe what EVERY ratchet made in Taiwan can handle 550nM with no issues! Where is no proof except image of testing certificate.

On video from Exhibition of HAZET 916 HP ratchet, weight was 300kg on length of 19cm. 300kg on 19cm length NOT equal to 1000nM! How they tested it on 1000nM and why not show it on video? Or I miss something??? I think 1000nm = ~520kg on 19cm length! Show me the proof!